Scribd
Upload
65 views21 pages

Instruction

The document provides instructions for assembling a baby carriage using various colored parts like sticks, rings, wheels and other connectors. It describes each individual part in detail, including the seat, wheels, handles and wings. Step-by-step directions are given on assembling each part and then combining them to complete the baby carriage.

Uploaded by

api-291734219
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views21 pages

Instruction

The document provides instructions for assembling a baby carriage using various colored parts like sticks, rings, wheels and other connectors. It describes each individual part in detail, including the seat, wheels, handles and wings. Step-by-step directions are given on assembling each part and then combining them to complete the baby carriage.

Uploaded by

api-291734219
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

Baby Carriage Instruction

James, John, Joon, Tom

Contents
1. Whole part
2. Seat part
3. Wheel part
4. Handle part
5. Wing part
6. Assemble part

Tips 1.Press until you hear a click


2.Push from the side is better
3.Care about direction

1. Whole part

3 blue wings, 1 purple fixing piece, 1 longest gray stick, 2 small half white
connecting rings, 4 middle half gray connecting rings, 4 shortest yellow sticks, 4
short red sticks, 4 middle yellow sticks, 4 middle half yellow connecting rings, 1 small
half red connecting ring, 4 small quarter yellow connecting rings, 2 middle white
quarter connecting rings, 1 small pink pin, 1 middle half green connecting ring, 7
small white sticks, 2 orange connecting bars, 2 beige fixing pieces, 5 small gray caps,
3 long red sticks, 2 middle orange sticks, 5 big blue connecting rings, 6 big white
connecting rings, 4 big wheels

2. Seat part

2-1. Consist of 3 middle yellow sticks, 1 middle orange stick, 2 small white sticks, 4
half yellow connecting rings, 4 half gray connecting rings, 2 big blue connecting rings

2-2. Assemble two half yellow connecting rings using 3 middle yellow sticks and 1
middle orange stick (orange stick is in third position)

2-3. Add two half yellow connecting rings and two half gray connecting rings to the
seat

2-4. Add 2 small white sticks at the back and fix it in 4 connecting rings

2-5. Add 2 middle half gray connecting rings at the bottom (care about position it
between two connecting rings)

(care about blue rings direction)


2-6. Add 2 big blue connecting rings to the front seat (rings direction is inside)

3. Wheel part

Consist of 4 white round connecting rings, 4 white short sticks, 2 connecting sticks, 4
wheels, 2 small holding sticks, 2 larger holding sticks, 2 middle size sticks(yellow,
orange), 3 blue three-way connecting rings, 3 red long sticks, 4 wheel holders

Step 3-1 (First make front wheel)

3-1-1. Add 2 middle quarter white connecting rings to the long red stick

3-1-2. Add wheels to the previous one

3-1-3. Add two caps to hold wheel

Step 3-2 (Second make back wheel)

3-2-1. Add beige fixing pieces to the long red stick

3-2-2. Add wheels to the previous one

3-2-3. Add two caps to hold wheel

Step 3-3 (Third make body of wheels)

3-3-1. Connect middle orange and yellow sticks with two orange connecting bars

3-3-2. Add 4 big white connecting rings to the previous one

3-4. Assemble step 3-1 and step 3-2 with step 3-3
(Orange side is front and yellow side is back)

3-5. Add 4 small white sticks to four directions

(Care about blue rings direction)


3-6. Add 2 big blue connecting rings to the top of white sticks and add long red stick
on them.(rings direction is inside) Also add 1 big blue connecting ring to the front
(rings direction is downside)

4. Handle part

Consist of 1 green half round connecting ring, 1 red half round connecting ring, 4
yellow quarter round connecting rings, 2 gray half round connecting rings, 1 white
short stick, 4 red long sticks, 4 yellow short sticks, 1 white round connecting ring, 1
pink connecting stick

4-1. Each part used two quarter yellow connecting rings and one half gray ring.
Using shortest yellow stick, connect three connecting rings.

4-2. Assemble two parts which is made up previous step using 4 middle red sticks
and 1 half red connecting ring

4-3. Assemble white connecting ring to the previous step using small pink pin.

4-4. Add small white stick to white connecting ring, and connect half green
connecting ring

5. Wing part

Consist of 1 purple holding stick, 1 white round connecting ring, 1 gray holding ring,
1 gray stick, 3 wing parts

5-1. Assemble wings with white connecting ring

5-2. Add purple fixing piece to the longest gray stick

5-3. Assemble the stick and wings

5-4. Add cap to hold wings

5-5. complete

6. Assemble part
(Assemble wheel part and seat part)

6-1. match the hole of back seat with red stick which connect back wheels column

6-1. Assemble front wheels column and front seat

6-3. after assemble wheel part and seat part


(Assemble wing part and wheel part)

6-4. assemble wings blue connecting ring with front wheels axis

6-5. after assemble wing part


(assemble handle part and wheel part)

6-6. assemble handles green connecting ring with red stick which connect back
wheels column

6-7. after assemble handle part (Complete!!)

You might also like