Case Interview Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 33
At a glance
Powered by AI
The key takeaways are that case interviews are used to assess problem solving and business judgment skills, cases are representative of real consulting work, and there are five components to breaking down a case: introduction, approach, analytics, recommendation, and next steps.

According to the passage, case interviews help gain insight into how applicants approach and analyze business issues, assess problem solving, analytics and business judgment skills, and give perspective into consulting work. Cases are also representative of real consulting work.

The five components of breaking down a case according to BCG are: introduction, approach, analytics, recommendation, and next steps/other areas to explore.

CRACKING

THE CASE!
Case Interview
Guide

TABLE OF CONTENTS

Introduction/Review of Interview Basics


Practice Cases

Case 1: Supermarket Deli Turnaround

Case 2: China Outsourcing Opportunity

Case 3: Growing Specialty Paper Sales

-1-

WHY CASE INTERVIEWS?

Cases help us gain insight into how you might approach and analyze a typical business issue

Assesses your problem-solving capabilities, analytics and


business judgment

Gives you a perspective of what consultants do


Cases are representative of our work

Our interview cases are frequently taken from real BCG case work

However, keep in mind that in the interview there are not always clear right or
wrong answers
To do well on the case, the interviewer is looking for you to

Provide a clear structure for your analysis

Prioritize the components of the problem

Listen and use relevant information to develop a clear recommendation


Case performance is not the only metric BCG uses to evaluate candidates, others include

Education, work and life experiences

Interpersonal and communication skills

Use
Use sound
sound business
business judgment
judgment to
to take
take the
the quickest
quickest (i.e.,
(i.e., least
least resource
resource
intensive)
intensive) path
path to
to the
the highest
highest impact
impact conclusion.
conclusion. BCG
BCG interviewer
interviewer
-2-

INTERVIEW FORMAT
45 Minute Interview

10-15 minutes

Discuss prior experiences


Open discussion (accomplishments,
motivations)

20-25 minutes

Case introduction
Case discussion
Case wrap up

5-10 minutes

Q&A, your chance to ask questions


Typically
Typically you
you are
are given
given two
two cases
cases in
in the
the first
first
round
round of
of interviews
interviews and
and three
three in
in second
second round
round
-3-

INTERVIEW FORMAT
Breaking Case into Five Components
Introduction

Approach

BCG Pose problem to be Evaluate structure


role solved
to solve case
Provide basic facts
(will vary in detail)

Analytics
Provide data and
context as asked

Recommendation
Wrap up interview
in time

Evaluate analytical Evaluate


performance (math, recommendation
deductions, etc.)

Your Confirm basic facts Articulate rationale Progress data


role as given
and sequence of
collection per
analyses to solve
your approach
case
Execute
computations
Explain what you
are thinking and
why
Articulate impact
(so what) per
step

Next steps/other
areas to explore
May prompt with
is there anything
else [Co.] should
consider?
Evaluate next steps

Conclude analyses Translate


with actionable
recommendation to
recommendation
implementation
Address problem
posed in
introduction

Incorporate
tangential areas for
investigation

Without
Without explaining
explaining the
the right
right approach,
approach, very
very
difficult
difficult to
to succeed
succeed in
in other
other steps
steps
-4-

KEY EVALUATION CRITERIA

Effectiveness
Effectivenessand
andimpact
impact
Tolerance
Tolerancefor
forambiguity
ambiguity
Self-motivated/directed
Self-motivated/directed
Leader
Leaderand
andteam
teamplayer
player
Intellectually
Intellectuallycurious
curious
Drives
Drivesto
toresults
results

Problem
Problemsolving
solving
and
insight
and insight
Framing/organizing
Framing/organizingthe
the
problem
problem
Prioritization
Prioritizationof
ofissues
issues
Identifying
Identifyingrelevant
relevant
information
information

Presence/communication
Presence/communication
Listening
Listeningskills
skills
Concise
Conciseand
andarticulate
articulate
Credible/mature
Credible/mature

Drawing
Drawingappropriate
appropriate
conclusions
conclusionsfrom
fromfacts
facts
and
andanalysis
analysis
Identifying
Identifyingimplications
implications
and
next
steps
and next steps

-5-

QUICK TIPS: DOs


Based on Feedback from BCG Interviewers
Open
Opendiscussion
discussion
Relax
Relax
Attitude
Attitudeshows
showsthrough
through
Keep
Keepititconversational
conversationaland
andfun
fun
Be
Beenthusiastic
enthusiasticand
andauthentic
authentic
Know
your
story
Know your story
Be
Begenuine
genuinetotoyourself
yourself
The
Thebasics:
basics: bring
bringpen
penand
andpaper,
paper,ask
askclarifying
clarifying
questions
questions
Listen,
Listen,Listen,
Listen,Listen
Listen
Prepare
Prepareaafew
fewquestions
questionstotoask
askinterviewer
intervieweratatthe
theend
end
ofofthe
theinterview
interview

Solving
Solvingthe
thecase
case
After
Afterthe
thesetup,
setup,ask
ask2-3
2-3value
valueadded
addedclarification
clarification
questions
to
help
you
frame
questions to help you frame
Use a relevant framework to help structure and
Use a relevant framework to help structure and
prioritize.
prioritize.There
Thereisisno
nostandard
standardapproach
approach
Think
Thinkout
outloud
loudmake
makeyour
yourlogic/rationale
logic/rationaleexplicit
explicit
Pace
Paceyourself
yourself
Avoid
Avoidaafrantic
franticstart
startcollect
collectyour
yourthoughts
thoughts
Be
Beaware
awareofofthe
thetime
timeyou
youneed
needtotobe
be
progressing
towards
a
recommendation
progressing towards a recommendation
Stop
Stopand
andsummarize
summarizewhen
whennecessary
necessary
Make
Makeititeasy
easyfor
forthe
theinterviewer
interviewertotofollow
followcalculations
calculations
Write
Writedown
downnumbers
numbers
Dont
Dontovercomplicate
overcomplicatethe
themath
math
Draw
Drawconclusions
conclusionsfrom
fromthe
thefacts
facts- -identify
identifypivotal
pivotal
evidence
for
your
argument.
evidence for your argument.
Conclude
Concludewith
withaarecommendation
recommendation- -what
whatshould
shouldthe
the
client
clientDO?
DO?Have
Haveaaviewpoint
viewpointand
andconviction
conviction
-6-

QUICK TIPS: DONTs


Based on Feedback from BCG Interviewers
Open
OpenDiscussion
Discussion

Solving
Solvingthe
theCase
Case

Focus
Focussolely
solelyon
onthe
thecase;
case;the
theopen
opendiscussion
discussionisisalso
also
important
in
our
evaluation
of
you
important in our evaluation of you

Begin asking variety questions before establishing


Begin asking variety questions before establishing
approach to problem.
approach to problem.

Fumble
Fumblethe
thebasics
basics(e.g.,
(e.g.,why
whyare
areyou
youinterested
interestedinin
consulting?)
consulting?)

Repeat back every detail of the case set up


Repeat back every detail of the case set up

Show
Showconcern/hesitation
concern/hesitationwhen
whenthe
theinterview
interviewshifts
shiftstoto
the
case
the case
Provide
Providelong,
long,technically
technicallydetailed
detaileddescriptions
descriptionsofof
your
yourexperiences
experiences
Try
Trytotosteer
steerthe
theconversation
conversation
Ignore
Ignoreinterviewers
interviewerssignals
signalsregarding
regardingpace,
pace,e.g.
e.g.
answering
answering22minute
minutequestion
questionwith
with10
10minute
minute
monologue
monologue

Get so set on a framework that you are unwilling to


Get so set on a framework that you are unwilling to
accept a new direction
accept a new direction
Avoid the math - interviewers are looking for your
Avoid the math - interviewers are looking for your
comfort level with numbers
comfort level with numbers
Ignore given information, clues on relevant issues
Ignore given information, clues on relevant issues
Get bogged down on less important issues
Get bogged down on less important issues
Make critical assumptions without explaining hte
Make critical assumptions without explaining hte
logic behind them
logic behind them
Take too long to formulate the summary think of the
Take too long to formulate the summary think of the
30 second elevator speech
30 second elevator speech
Ask how did I do? or did I get the right answer?
Ask how did I do? or did I get the right answer?
during the interview
during the interview
-7-

HOW TO PREPARE

Practice problem solving

Case examples (this book!, Wet Feet Press, consulting club casebooks,
www.bcg.com)

Interview workshops and mock interviews

Student peers, former BCG Associates, former BCG summer interns

Make it as realistic as possible (e.g., timing, write down ideas/approach,


talk out loud)

Give cases to others to see things from the other side


Talk to alumni and friends who have experience with case interview formats

Practice
Practice helps
helps train
train you
you to
to structure
structure the
the problem
problem and
and think
think out
out loud;
loud;
however,
however, beware
beware the
the risk
risk of
of becoming
becoming robotic
robotic with
with over-practice
over-practice
-8-

TABLE OF CONTENTS

Introduction/Review of Interview Basics


Practice Cases

Case 1: Supermarket Deli Turnaround

Case 2: China Outsourcing Opportunity

Case 3: Growing Specialty Paper Sales

-9-

Case
Case 11

CASE #1 - SUPERMARKET DELI TURNAROUND


Problem Set-Up

The client is a national supermarket chain that is facing a very difficult situation.
Low-price competitors like Wal*Mart, Costco, and Dollar General are stealing
share and eroding margins in the traditional grocery business. Therefore, other
departments within its stores, such as produce and deli, are becoming
increasingly important to our clients financial health
In particular, the client is concerned about their deli department, a $700M
business that has been reporting no profit growth over the last few years. The
deli department consists of two main business lines: 1) deli meats and 2)
prepared foods (sandwiches, fried chicken, etc.)
We have been asked to help the client understand why their deli profits are not
growing and what they need to do to turn things around

- 10 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Questions and Facts
Topic

Information to share with interviewee

Clients deli financials

Share Exhibit 1

Overall industry/
customers

Deli meat category has been flat to slightly declining recently


Prepared foods category has been growing at roughly 10% per year as people
have less time to cook at home

Competitors

Increasing competition from deli departments of other supermarkets,


discounters, etc. e.g., expanding product lines, increasing advertising
Also compete with fast food restaurants in prepared foods category

Clients product mix/


recent events

Mix has remained constant, with exception of two products introduced a couple
of years ago BBQ chicken wings and made to order sandwiches
- both products have been a major boost to prepared foods revenue

Info on new products

BBQ wings are similar to the chicken wings the company already sells, although
they take a little longer to fry and are tossed in BBQ sauce after frying
Made to order sandwiches is clients response to Subway, etc. for two hours
during lunchtime and two hours during dinnertime, one employees sole task is
to make sandwiches to order for customers

Revenues for each product are $40M annually


Costs not broken down at product level
Give info on Exhibit 2 as requested (but do not hand sheet to interviewee)

Financials of new
products

- 11 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Exhibit 1
$M
Deli meats

Prepared foods

Overall

2002

2003

2004

Revenues

260

255

260

COGS

160

155

160

Revenues

360

400

440

COGS

190

230

270

Revenues

620

655

700

COGS

350

385

430

Gross margin

270

270

270

- 12 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Exhibit 2

Made-to-order sandwiches

BBQ wings
Price
Total material cost
Prep time

Employee cost

$5 for 20 pieces
$0.10 per piece
15 minutes per
batch of 200
$20 per hour
(fully loaded)

Price

$4 per sandwich

Avg. sales/store

20 sandwiches
per day

Total material cost

$2 per sandwich

Employee cost

Total COGS

$2.50 per 20 pieces

Dedicated hours

Margin

$2.50 per 20 pieces

Revenue

$20 per hour


(fully loaded)
4 hours per day
$80 per store per day

Total COGS

$120 per store per day

Margin

$(40) per store per day

Note: Boxes indicate figures that should be calculated by the interviewee

- 13 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Sample Approach
Main question

Key areas to
explore

Analysis

Recommendation

Other factors

What should supermarket do to turn around deli?

Revenue and profit breakdown within deli

Deli meat revenue and profits flat consistent with overall category
Prepared foods showing revenue growth
(10% consistent with category) but no profit
growth therefore declining margins why?
- made-to-order (MTO) sandwiches losses
offsetting profit growth from BBQ wings

External factors influencing the overall


deli market

People have less time to cook at home


prepared foods category growing, deli meats
category flat
Increasing competition from other deli
departments starting to expand product
lines, increase advertising, etc.

Eliminate made-to-order sandwiches (at least in low-traffic stores or during non-peak hours)
Raise or lower prices on MTO sandwiches (depending on demand elasticity)
Boost demand for MTO sandwiches (e.g., advertising, promotions, merchandising)

Eliminating MTO sandwiches or boosting demand can impact overall traffic in store and deli

- 14 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Framework and Analysis (I)

There are three main questions that the interviewee needs to answer
Which part of the business is responsible for the lack of profit growth deli meats,
prepared foods, or both?
Is the lack of profit growth caused by flat revenues, increasing costs, or both?
What is causing the flat revenues or increasing costs (and what should the client do)?
Based on Exhibit 1, the interviewee will see that gross margins for both business lines are flat.
Furthermore, deli meat sales have been basically flat while prepared foods sales have been
growing at 10%.
The interviewee should recognize that the clients deli meat and prepared food sales have
been growing at about the category averages; therefore, revenues are not the main issue here.
Deli meat COGS have been more or less flat, mirroring sales. However, despite robust growth
in prepared food sales, prepared food profits have been flat, implying deteriorating margins.
At this point, ask the interviewee for some potential reasons for deteriorating margins (e.g.,
change in product/sales mix, rising material costs, rising labor costs).
It is critical that the interviewee asks about changes in product mix, in which case the
interviewer should inform him about the BBQ chicken wings and the made to order
sandwiches. The interviewee should be suspicious at this point and ask to learn more about
these products.
- 15 -

Case
Case 11

SUPERMARKET DELI TURNAROUND


Framework and Analysis (II)

By doing a back of the envelope analysis of product profitability (based on data in Exhibit 2),
the interviewee will find that BBQ wings have a 50% margin, indicating that they are not a
problem. On the other hand, the interviewee will find that the client is losing a lot of money on
the made to order sandwich concept.
The interviewee should then be asked for recommendations, which could include: 1)
eliminating the made to order sandwich, 2) restricting the sandwich to busier stores or
during busier times of the day (e.g., lunch hours only), 3) raising or lowering prices (to either
increase profit per sale or units sold will depend on demand elasticity), and/or 4) boost
demand (through increased advertising, promotions, better merchandising, etc.). A good
answer will also consider the second-order effects of eliminating the product or boosting
sales (the effect on traffic in the deli and the overall store).

- 16 -

TABLE OF CONTENTS

Introduction/Review of Interview Basics


Practice Cases

Case 1: Supermarket Deli Turnaround

Case 2: China Outsourcing Opportunity

Case 3: Growing Specialty Paper Sales

- 17 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Problem Set-Up

The client is a national manufacturer of plastic consumer products that are sold in
a variety of retail formats, including supermarkets, discounters, club stores, and
dollar stores. The company has three main product lines 1) freezer bags, 2)
plastic plates and utensils, and 3) specialty plates and utensils.
The CEO has been reading for some time about American companies outsourcing
their production overseas to low-cost countries such as China. She wonders
whether this makes sense for her company as well. It worries her that none of her
main competitors have established foreign production capabilities; on the other
hand, this could be a tremendous opportunity to gain a competitive advantage.
We have been asked to help the client understand the benefits and risks of
moving its production capabilities to China and to provide a recommendation.

- 18 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Questions and Facts (I)

Product description

Costs (China vs. U.S.)

Consumers

Competitive landscape

Freezer bags
Plastic bags used
mainly to store food
items in freezers

All three product lines


have similar cost
structures and savings
Give interviewee
Exhibit 1

Top purchase criteria


is quality, since low
quality bags will result
in food spoilage

Client is #3 in category,
200 million lbs. sold
Category leader has
strong brand and
strong innovation

Plastic plates and


utensils
Disposable plates and
utensils; intended for
single/limited use

All three product lines


have similar cost
structures and savings
Give interviewee
Exhibit 1

Top purchase criteria


is price

Client is #2 in category,
300 million lbs. sold
Client at cost parity
with category leader
but has weaker brand

Specialty plates and


utensils
Plastic plates and
utensils produced for
specific retailers,
customized to their
design specs

All three product lines


have similar cost
structures and savings
Give interviewee
Exhibit 1

Top purchase criteria


is style/design
Because many
products are new and
untested, demand is
highly variable

Client is #1 in category,
100 million lbs. sold
No strong competitors

- 19 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Questions and Facts (II)
Topic

Information to share with interviewee

Current client
production capabilities

All products are made in a single factory in Ohio


The factory is at capacity and the company is considering building or
acquiring a nearby facility

Chinese production
options

Client has no previous experience in building and managing a factory


overseas
Client has met with several Chinese manufacturing partners and has done
initial product testing
- Cost
all three product lines have similar cost structures and savings
give interviewee Exhibit 1
- Quality
lower quality on freezer bags
equal quality on plastic plates and utensils (both regular and specialty)
- Lead time
need 3-4 weeks of additional lead time for each product line for
transportation from China to U.S. distribution center

Chinese market,
current client
presence

All three categories are relatively underdeveloped but growing, dominated


by local manufacturers
Client does not currently have any sales in China, although a few of their
U.S. customers (e.g., Wal*Mart) do have presence there
- 20 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Exhibit 1
Costs in
U.S. ($/lb.)

Costs in China
relative to U.S.

Labor

0.30

8% of wage rate
80% of productivity

Material
Plastic resin
Other material (incl. packaging)

0.30
0.20

80%
75%

Variable overhead

0.05

140%

Fixed overhead

0.10

60%

Transportation
China to U.S. distribution center
U.S. distribution center to customer

N/A
0.05

$6K to ship 40K lbs.


Same

Total

1.00

Costs

Costs in
China ($/lb.)

- 21 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Sample Approach
Main question

Key areas to
explore

Analysis

Should plastics manufacturer move production to China?

Cost savings

Would save $0.25/lb. (25% of


current costs)
At current production levels,
would save:
- $50M in freezer bags
- $75M in plastic plates and
utensils
- $25M in specialty plates
and utensils

Consumer behavior and


purchase criteria

Effect on current
production capabilities

Quality is top purchase


criteria for freezer bags
- lower quality from China
Price is top criteria for plastic
plates and utensils
Style is top criteria for
specialty plates and utensils
- highly variable demand
requires short lead times

Current plant is at capacity


- outsourcing would
eliminate need to build
additional capacity
Plastic plates and utensils are
50% of total production
- outsourcing may create
too much extra capacity

Recommendation

Outsource plastic plates and utensils to China


Do not outsource specialty plates and utensils
Do not outsource freezer bags (although further analysis may be warranted)

Other factors

To compensate for extra capacity that would be created in current plant, could produce new
product line, rent out spare capacity, or move to smaller facility
- 22 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Framework and Analysis (I)

The interviewee should start with a brief overview of the potential benefits and risks of
outsourcing to China. The main benefit is lower costs, mostly driven by inexpensive labor. A
secondary benefit is a possible springboard into the emerging Chinese (and other Asian)
market. Risks include lower labor productivity, possible quality issues, longer lead times,
additional transportation costs, and potential communication/coordination issues. Ask the
interviewee about the ramifications of longer lead times they include greater carrying costs,
higher cycle and safety stock, greater forecast error, and less responsiveness to demand.
There are three main questions that the interviewee needs to answer:
How much cheaper is producing in China?
What do consumers value and how would outsourcing affect those criteria?
What are the clients current production capabilities and how would outsourcing part/all
of their production affect the remainder?
First, the interviewee should size the opportunity is this a $5 million or $500 million
opportunity? By solving for the last column in Exhibit 1, the interviewee will find that the
client would save $0.25/lb. (25% of current costs) by outsourcing to China. Given current
production levels, the client would save $50 million by outsourcing freezer bags, $75 million
by outsourcing plastic plates and utensils, and $25 million by outsourcing specialty plates
and utensils. Two notes: 1) costs may increase if the Chinese Yuan rises versus the dollar
and 2) these estimates do not include a profit margin for the Chinese outsourcing partner.
- 23 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Framework and Analysis (II)

The interviewee must recognize, however, that cost savings alone are not sufficient to make a
decision. It is important to understand how an outsourced product will affect sales. The
interviewee should suggest market research to understand consumer behavior.
Freezer bags: since customers top purchase criteria is quality and outsourcing would
produce lower quality bags, the interviewee should raise a red flag here. A more
sophisticated recommendation would be to conduct market research to see the impact on
sales of the lower quality bag at lower prices even though quality is more important than
price, the magnitude of a price change may override the drop in product quality.
Plastic plates and utensils: the top purchase criteria here is price, which makes this product
line an attractive outsourcing opportunity. Ask the interviewee what the client should do with
the cost savings potential recommendations include dropping price to steal share, investing
to defend its position in case competitors begin outsourcing (e.g., brand, innovation,
customer service), and milking the product line as a cash cow.
Specialty plates and utensils: the highly variable and unpredictable demand for these
products means that shorter lead times are critical in order to adjust production quickly.
Longer lead times will result in greater forecast errors, higher safety/cycle stock, and more
unsold inventory and/or out-of-stocks. Therefore, specialty plates and utensils should not be
outsourced.
- 24 -

Case
Case 22

CHINA OUTSOURCING OPPORTUNITY


Framework and Analysis (III)

An analysis of customer purchase behavior indicates that plastic plates and utensils should
be outsourced, specialty plates and utensils should not be, and freezer bags probably should
not be. The final step is to understand the impact of outsourcing on the clients current
production capabilities. For example, will it lead to plant closings (resulting in closing costs
and possible negative publicity)? Will it lead to underutilization of current facilities?
Since the current plant is already near capacity, moving plastic plates and utensils offshore
would actually save the client from investing in new facilities. However, since that product
line makes up 50% of total production (in terms of lbs.), removing it may create too much
extra capacity in the current plant for the two remaining lines. To compensate, the client
could produce a new product line, rent out the extra capacity, or move to a smaller plant.

- 25 -

TABLE OF CONTENTS

Introduction/Review of Interview Basics


Practice Cases

Case 1: Supermarket Deli Turnaround

Case 2: China Outsourcing Opportunity

Case 3: Growing Specialty Paper Sales

- 26 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Problem Set-Up

Your client is a leading manufacturer of specialty papers sold to commercial


printers. The client produces self-adhesive sheeted papers that are ultimately
used in a variety of labeling applications including the labeling of consumer
goods and the printing of self-adhesive signs.
Your clients operations are profitable, but the business has failed to grow over
the past few years. The client would like to invest in the business and you have
been asked to identify opportunities for growth.

- 27 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Questions and Facts (I)
Topic
Supply chain

Information to share with interviewee


Raw mats
Rolls of paper
Adhesive
Non-stick liner

Layering
Adhesive and
liner applied
to rolls

Sheeting

Packaging

Distrib.

Rolls of layered
paper cut into
sheets

The client is not capacity constrained in its manufacturing processes


The clients manufacturing and packaging operations are currently configured to package
specialty papers in boxes
Customers

There are approximately 24,000 commercial printers in the United States


Printers are roughly categorized into three groups: small, medium, and large
Differences among the groups are driven by the type of printing technology employed and
the size of print jobs that the printers are able to serve
Printers prefer to receive product from the specialty paper manufacturers in different forms,
primarily driven by the type of printing technology employed
- Small printers prefer to receive their specialty paper in boxes
- Medium printers prefer cartons of specialty paper
- Large printers prefer to receive palletized shipments of specialty paper

Market share

The client has approximately 30% market share with small printers and only 10% share with
medium and large printers

Client financials

Margins are currently acceptable but management is against cutting price to gain market
share, knowing that competitors can match price cuts
Price and cost to serve per equivalent box are different for each customer type
- 28 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Questions and Facts (II)
All figures are per equivalent box
Small (boxes)

Medium (carton)

Large (pallets)

20.00

18.00

15.00

Materials

5.50

5.50

5.50

Coating

1.00

1.00

1.00

Sheeting

0.50

0.50

0.50

Packaging (direct costs)

3.00

2.00

1.00

10.00

9.00

7.00

20,000

3,000

1,000

100

500

3,000

20,000,000

13,500,000

Price to printer

Gross profit/($ per equivalent box)


Number of printers
Annual usage (number of
equivalent boxes)
Total potential profit pool ($)

21,000,000

Information
Information revealed
revealed only
only when
when asked
asked
interviewee
interviewee completes
completes all
all calculations
calculations
- 29 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Framework and Analysis (I)

The problem set-up indicates that the client wants to invest in this business. Investment can
take many forms including expansion of manufacturing operations and capacity, expansion of
customer-facing activities, and acquisition of competitors. Its interesting to note that this is
currently a profitable, no-growth business for the client. Investment decisions cannot be
made unless the management team (and the interviewee) understand the market conditions as
well as the clients internal capabilities
This case does not lend itself well to traditional case solution structures. A strong initial
response is to list a set of internal and external factors that must be understood and
evaluated. Ultimately, the interviewee should decide whether investment is warranted, and if
so, where
Strong hypotheses might include

Assuming the client is not capacity constrained, there are likely groups of customers
that represent opportunities for profitable growth

Depending upon the current go-to-market strategy, the client may need to re-evaluate
the way that it is configured to serve existing and potential customers

- 30 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Framework and Analysis (II)

Assume the client can expand their packaging operations to better serve medium or large
customers, but not both
Interviewee should recognize that a comprehensive solution evaluates the required
investment to serve a particular market segment (packaging line, manufacturing operations,
additional SG&A) against the expected return

For simplicity, interviewee should ignore taxes and depreciation, assume SG&A is
fixed
Client economics and cost to serve each customer group are shown on Exhibit 1
Interviewee should evaluate the profit pool from serving medium and large customers. This
should be based upon an assumption about the size of the market that the client can capture.
Assuming the client can match its small printer market share, the client could capture an
additional 20% of the medium or the large printer customer segment

Assume the following (and reveal to interviewee when asked)

Investment and operation of carton packaging line would cost $675,000 per year

Investment and operation of the palletizing line would cost $2,300,000 per year
- 31 -

Case
Case 33

GROWING SPECIALTY PAPER SALES


Framework and Analysis (III)

A logical conclusion would be that an investment in a carton packaging line would be a


superior investment compared to the palletizing line
A strong answer may also include following

The carton packaging line is a less-risky investment (requires less up-front capital)

The solution assumes a static environment. If large printers are growing in number
and or usage of specialty paper, this may change the answer

The investment in a new carton packaging line would need to be evaluated against
other potential investments to understand if it is the optimal use of the clients capital

- 32 -

You might also like