0% found this document useful (0 votes)
437 views1 page

Wind Loads Calculation BS6399 1

The document provides calculations of wind loads on a 30m tall tower located 100m above sea level according to BS 6399-2. It determines the basic wind speed of 25m/s and calculates adjustment factors for altitude, direction, season, and probability to find an effective wind speed of 53.9m/s. It also notes the building dimensions are 51m long by 25m wide and that dividing it would provide a negligible load reduction.

Uploaded by

Lee LaiHaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
437 views1 page

Wind Loads Calculation BS6399 1

The document provides calculations of wind loads on a 30m tall tower located 100m above sea level according to BS 6399-2. It determines the basic wind speed of 25m/s and calculates adjustment factors for altitude, direction, season, and probability to find an effective wind speed of 53.9m/s. It also notes the building dimensions are 51m long by 25m wide and that dividing it would provide a negligible load reduction.

Uploaded by

Lee LaiHaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Evo Design s.r.l.

DESIGN REVIEW REPORT

xxxx TOWER
Location xxx

WIND LOADS CALCULATION PER BS 6399-2


FOR A BASIC WIND SPEED OF 25 m/s
m
Vb 25
s

basic wind speed

Kb 1

building type factor in accordance with BS 6399-2 Table 1.


for ramed building with structural walls arround lifts and stairs only (e.g.
office buildings of open plan or without partitions)

Hr 30 m

Reference height

He Hr

Effective height to be considered in the calculations

Basic wind speed calculation in accordance with BS 6399-2 Section 2.2.1


S 100

site altitude above sea level in meters - Section 2.2.2.2

Sa 1 + 0.001 S

altitude factor

Sa = 1.1
Sd 1

direction factor - Section 2.2.2.3 for unknown wind


direction

Ss 1

seasonal factor - Section 2.2.2.4

Sp 1

probability factor - Section 2.2.2.5

Vs Vb Sa Sd Ss Sp

m
Vs = 27.5
s

Effective wind speed calculation in accordance with BS 6399-2 Section 2.2.3


Sb 1.96
Ve Vs Sb

terrain and building factor - Section 2.2.3.3 - Table 4


m
Ve = 53.9
s

effective wind speed

for building heights larger that the width some reduction in wind loads may be obtained
by dividing the building into a number of parts - in our case the reduction is neglijable.
L 51 m

building length

W 25

building width

You might also like