Scribd
Upload
65 views

D-Code-list: Cad and Cam Specifications

D code list

Uploaded by

emaster1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views

D-Code-list: Cad and Cam Specifications

D code list

Uploaded by

emaster1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

50

1.0 Application

The D-code-list or aperture table describes the graphic tools used


in a Gerber file. The D code-list is indispensable for the CAM
processing of the CAD data.

2.0 Gerber files

Definitions and structure: see Document Gerber [S.116].

2.1 File format

The D-code-list must be described in ASCII-format. Size units can


be indicated in inch, mil or mm.

2.2 D-code list

The D-code list must contain the assignment of all existing


D-codes of a Gerber file to a geometrical shape and to a mechanical size.

2.2.1 Example

D-code
D 30
D 40
D 10
D 20
D 48
D 11
D 12
D 13
D 14
D 16
D 17
D 18
D 19
D 21
D 22
D 23
D 24
D 26

Shape
Square
Square
Square
Square
Square
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle

(mm)
0.1
0.2
0.3
0.4
1.62
0.1
0.2
0.25
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2

D-code
D 27
D 28
D 29
D 31
D 32
D 33
D 34
D 36
D 37
D 38
D 39
D 41
D 42
D 43
D 15
D 25
D 35
D 49

Shape
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Circle
Heat
Heat
Heat
Cross

(mm)
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.6
1.6
2.0
2.8
2.8

2.3 Limits

D10, ..., D999 may be assigned to tools.


D0, ..., D9 must not be assigned to tools.
The smallest sensible aperture is 0.1 mm.

2.4 Rules

1.)
2.)
3.)
4.)

3.0 Note

For generating filled areas, the largest possible D-code should be


used. A D-code with a size of 0.2 mm is recommended. The minimum size is 0.1 mm.

There must be a D-code list for each Gerber file.


Each D-code must only be assigned once.
The D-code list must not contain any macros.
The apertures must not be rotated.

4.0 Cross-referGerber [S.116]


ences (Hyperlinks)

CAD and CAM


Specifications

File
: DCodeLst.1
Issued : 16.08.1996 / li-Wi
Revision : --

Copyright by ILFA GmbH / Edition 7.2 - 2005

D-Code-list

You might also like