Scribd
Upload
56 views2 pages

Gujarat Technological University

This document appears to be an exam for a power systems engineering course, consisting of 5 questions covering various topics: 1. Corona losses in transmission lines, series compensation, and permissible corona limits. 2. Factors in mechanical design of transmission lines like ground clearance, earthing, and span/sag. Kelvin's law for feeder sizing. 3. Basic insulation levels of substation equipment. Calculating ABCD constants and regulation for a transmission line. Issues with solar PV grid interconnections and lamp flickering. 4. Ring and grid distribution systems. HVDC systems and link types. 5. Merits and demerits of HVDC transmission. Design of cables

Uploaded by

Palak Ariwala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Gujarat Technological University

This document appears to be an exam for a power systems engineering course, consisting of 5 questions covering various topics: 1. Corona losses in transmission lines, series compensation, and permissible corona limits. 2. Factors in mechanical design of transmission lines like ground clearance, earthing, and span/sag. Kelvin's law for feeder sizing. 3. Basic insulation levels of substation equipment. Calculating ABCD constants and regulation for a transmission line. Issues with solar PV grid interconnections and lamp flickering. 4. Ring and grid distribution systems. HVDC systems and link types. 5. Merits and demerits of HVDC transmission. Design of cables

Uploaded by

Palak Ariwala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Seat No.

: ________

Enrolment No.___________

GUJARAT TECHNOLOGICAL UNIVERSITY


BE - SEMESTERVIII EXAMINATION WINTER 2014

Subject Code: 180903


Subject Name: Power System Practice and Design
Time: 02:30 pm - 05:00 pm

Date: 02-12-2014
Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

Q.1

Q.2

Q.3

Q.3

Q.4

(a) What are corona losses? Explain Peeks and Petersons formula for calculating
the corona loss. What is the permissible limit?
(b) What do you mean by compensation with refer to transmission line? Explain
series compensation.

07

(a) Discuss the following factors to be taken into consideration in the mechanical
design of a transmission line.
(1) Clearance from the ground
(2) Earthing
(3) Span, sag
(b) Explain the role of Kelvins law for the selection and size of feeders.
OR
(b) Explain any one method of measuring soil resistivity and earthing resistance.

07

(a) Define basic insulation level. Explain the insulation levels of substation
equipment.
(b) Determine ABCD constants and regulation of 3-phase transmission line
considering following data.
Power = 85,000 kw, power factor = 0.85 lagging, Distance = 160 km, voltage
=230 KV, spacing of conductors= 10.2 m, Resistance/km = 0.21 , outer radius
R = 0.827 cm, Self GMD= 0.768 R
OR
(a) Explain the different issues related with interconnections between grid and
Solar PV.
(b) Write a short note on Lamp flickering.

07

(a) Explain the following distribution system with figures.


(1) Ring System
(2) Network (Grid) system
Draw and explain schematic diagram of HVDC system. Discuss various types
(b)
of HVDC link.

07

07

07
07

07

07
07

07

OR

Q.4

(a) The following loads are connected to a three phase four wire 415/230 V
distribution system.
(1) A three phase 12 KW load at 0.85 power factor lagging.
(2) A three phase 9 KW load at unity power factor.
(3) A single phase 1.2 KW load at 0.85 power factor lagging between the
phase R and neutral.
(4) A single phase 2.5 KW load at 0.9 power factor leading between the
phase Y and neutral.
(5) A single phase 2 KW load at unity power factor between the phase B
and neutral.
The phase sequence is RYB. Calculate the currents in each line and current in
Neutral.

07

Q.5

Q.5

(b) Explain the factors while considering choice and spacing of conductors for
transmission line design.

07

(a) Explain the merits and demerits of HVDC transmission system.


(b) Explain the design of cables considering the ampere capacity.
OR
(a) Explain the different types of EHV towers. List out the EHV systems in INDIA.
(b) Explain the working principle of Lightning Arrester. Explain the construction
of Horn Gap type Arrester.

07
07
07
07

*************

You might also like