Scribd Logo
Upload

Welcome to Scribd!

  • 77 views

    p32 - 33 Hydro 8 Production Packer

    Uploaded by

    Pak Rio
    The Hydro-8 packer is a retrievable packer that can be used for single-zone or multiple-zone completions in wells up to 5000 psi and 275°F. It features an easy-release shear system and internal bypass system. The packer is compact for installation in deviated wells and can be set using applied tubing pressure without manipulating the tubing. It can also be reset on-site using a simple upward pull on the tubing. The packer comes in sizes to fit 4.5, 5, and 5.5 inch casing with inside diameters ranging from 1.995 to 3 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    p32 - 33 Hydro 8 Production Packer

    Uploaded by

    Pak Rio
    77 views2 pages
    The Hydro-8 packer is a retrievable packer that can be used for single-zone or multiple-zone completions in wells up to 5000 psi and 275°F. It features an easy-release shear system and internal bypass system. The packer is compact for installation in deviated wells and can be set using applied tubing pressure without manipulating the tubing. It can also be reset on-site using a simple upward pull on the tubing. The packer comes in sizes to fit 4.5, 5, and 5.5 inch casing with inside diameters ranging from 1.995 to 3 inches.

    Original Description:

    jijikko

    Original Title

    p32_33 Hydro 8 Production Packer

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Hydro-8 packer is a retrievable packer that can be used for single-zone or multiple-zone completions in wells up to 5000 psi and 275°F. It features an easy-release shear system and internal bypass system. The packer is compact for installation in deviated wells and can be set using applied tubing pressure without manipulating the tubing. It can also be reset on-site using a simple upward pull on the tubing. The packer comes in sizes to fit 4.5, 5, and 5.5 inch casing with inside diameters ranging from 1.995 to 3 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    77 views2 pages

    p32 - 33 Hydro 8 Production Packer

    Uploaded by

    Pak Rio
    The Hydro-8 packer is a retrievable packer that can be used for single-zone or multiple-zone completions in wells up to 5000 psi and 275°F. It features an easy-release shear system and internal bypass system. The packer is compact for installation in deviated wells and can be set using applied tubing pressure without manipulating the tubing. It can also be reset on-site using a simple upward pull on the tubing. The packer comes in sizes to fit 4.5, 5, and 5.5 inch casing with inside diameters ranging from 1.995 to 3 inches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Hydro-8 Production Packer

    Applications

    Rated to 275F and 5000 psi


    [135C and 345 bar]
    Bottom packer in multiple-zone
    dual completions
    Single-zone completions.

    Benefits and features

    Packer features an easy release


    with a fully adjustable, straight
    pickup shear system.
    Built-in equalizing and circulating
    system ensures safe and easy
    retrieval.
    Compact design provides quick
    and reliable installation in highly
    deviated wells.

    The Hydro-8* retrievable packer is


    a large-bore, hydrostatic-set, doublegrip packer used in a variety of
    applications including single-zone
    isolation, multiple string hookups,
    selective multiple-zone production or
    stimulation. The Hydro-8 packer features a mechanical, bidirectional slip
    system to retain the packer and resist
    upward and downward tubing movement. The packer has a built-in internal bypass system that allows the
    formation pressure to equalize when
    releasing.

    32

    The setting mechanism of the tool


    is activated with applied tubing pressure. The trigger pressure is readily
    adjusted by adding or removing easily
    accessible shear screws. After being
    triggered, the Hydro-8 packer sets and
    packs off in response to the force generated by applied and hydrostatic tubing pressure. This provides a surface
    pack-off force to allow the packer to
    be successfully set at lower pump
    pressures.
    Once set, the pack-off force is
    mechanically locked into the slips and
    sealing element and allows the tubing
    to be landed either in tension, compression or neutral. The Hydro-8
    packer does not require tubing manipulation during setting and can be set
    even after the wellhead has been
    installed. Releasing is accomplished
    by a simple upward pull on the tubing
    string. Unlike many hydrostatic packers, the Hydro-8 packer can be adjusted
    or redressed in the field by on-site
    personnel. The packers also feature
    an optional slickline-intervention,
    selective-set feature (upward or downward shift).
    The large bore Hydro-8 packer has
    a 2-in. ID for 4.500- and 5.000-in. casing [50.8-mm ID for 114.3-mm and
    127.0-mm casing], a 2.375-in. ID for
    5.500-in. casing [60.3-mm ID for
    139.7-mm casing] and 3-in. ID for
    7-in. casing [76.2-mm ID for 178 mm
    casing].

    Sand Face Completions Catalog

    Hydro-8 Production Packer Specifications


    Casing

    Packer

    OD
    (in. [mm])

    Weight Range
    (lbm/ft [kg/m])

    ID Range Min
    (in. [mm])

    ID Range Max
    (in. [mm])

    412 [114.3]

    9.513.5 [14.120.1]
    1518 [22.326.8]
    11.513 [17.119.3]
    26 [38.7]
    2023 [29.834.2]
    15.520 [23.129.8]
    1315.5 [19.323.1]

    3.920 [99.6]
    4.276 [108.6]
    4.494 [114.1]
    4.548 [115.5]
    4.670 [118.6]
    4.778 [121.4]
    4.950[125.7]

    4.090 [103.9]
    4.408 [112.0]
    4.560 [115.8]
    4.548 [115.5]
    4.778 [121.4]
    4.950 [125.7]
    5.044 [128.1]

    5 [127.0]

    51 2 [139.7]

    Other

    Bore ID
    (in. [mm])

    1.995 [50.7]

    Maximum OD
    (in. [mm])
    3.771 [95.8]
    4.125 [104.8]
    4.250 [108.0]

    2.441 [62.0]

    4.500 [114.3]
    4.641 [117.9]
    4.781 [121.4]

    Thread
    Connection
    23 8 EUE
    box up,
    pin down
    278 EUE
    box up,
    pin down

    sizes available. Contact your Schlumberger representative.

    QUANTUM Sand Control Packers

    33

    You might also like