Iodometry

Iodometry.
Titration with Sodium Thiosulfate

Numerous methods are based upon the reducing properties of iodide ion: 2I + 2e I2.
Iodine, the reaction product, is ordinary titrated with a standard sodium thiosulfate solution, with
starch serving as the indicator:
I2 + 2Na2S2O3 2NaI + Na2S4O6
I. Standardisation of Sodium Thiosulfate Against Potassium Dichromate

Solutions of sodium thiosulfate are conveniently standardised by titration of the iodine when
unmeasured excess of potassium iodide is added to known volume of an acidified standard
potassium dichromate solution:
K2Cr2O7 + 6KI + 7H2SO4 = Cr2(SO4)3 + 4K2SO4 + 3I2 + 7H2O
Each mole of dichromate results in the production of three moles of iodine meqK2Cr2O7 = M/6.
1. Preparation of 0,02 N Potassium Dichromate Standard Solution

1. Calculate a primary standard sample (mPDT) for preparation 200 ml of 0,02 N solution:
N V meq
.
M.m. K2Cr2O7 = 294,187 g.
mPDT =
1000
2. Weight potassium dichromate sample on laboratory balance with 0,1 g accuracy and put powder
into weighting bottle.
3. Weight weighting bottle with potassium dichromate on analytical balance.
4. Transfer the potassium dichromate into volumetric flask and weight empty weighting bottle on
analytical balance. Calculate the potassium dichromate sample weight mPDP.
5. Add 40-50 ml of distilled water to volumetric flask, dissolve potassium dichromate and
establish exact volume of solution with water.
6. Calculate precision normal concentration of prepared solution of potassium dichromate:
m 1000
NPD = PD
V meq PD
2. Standardisation of Sodium Thiosulfate Solution

1. Load a burette with standardised sodium thiosulphate solution.
2. Pipette 10-ml aliquot of prepared standard potassium dichromate solution into 100 ml flask. Add
10 ml of 10 % KI solution and 10 ml of 1 M H2SO4 solution.
3. Cover the flask with a stopper and put into dark place at 10 min.
4. Titrate the sample solution with thiosulfate until the solution becomes pale yellow. Introduce 5
drops of starch indicator, and titrate with constant stirring to the disappearance of the blue colour.
5. Read the burette mark (VST).
6. Calculate precision normality (molarity) of the sodium thiosulphate standard solution accordance
to equivalents law (NPDVPD = NSTVST): NST = NPDVPD/VST.
II. Iodine Determination

1. Add to conic flask 10 ml aliquot of problem solution (VI2).
2. Introduce 5 drops of starch indicator, and titrate with constant stirring to the disappearance of
the blue colour.
3. Repeat titration also two times. Calculate the approximate value of used sodium thiosulphate
standard solution (VST).
N ST VST meq I2 W
4. Calculate the iodine percentage in sample: x% =
100% .
VI2 p Iod
M.m. I2 = 254;
meqI2 = M/2;
pIod = 5,00;
W = 1000.
III. Back-titration of Formaldehyde with Iodine

In alkali solution iodine is disproportioned accordance to equation:
I2 + 2NaOH = NaOI + NaI + H2O
Formaldehyde is oxidised with formed hypoiodite ion:
HCHO + NaOI = HCOOH + NaI
Surplus of hypoiodite in alkali solution is disproportioned to periodate:
3NaOI = NaIO3 + 2NaI
In acidified solution periodate surplus removes to iodine:
NaIO3 + 5NaI + 3H2SO4 = I2 + Na2SO4 + 3H2O,
which are titrated with standard sodium thiosulfate solution.
1. Load a burette with 0,02 N standard sodium thiosulfate solution.
2. To conical flask pour in 10 ml aliquot of sample (VS), add 10 ml of 0,05 N iodine standard
solution (VI2), and 10 ml of 1 M NaOH solution.
3. Cover the flask with a stopper and put into dark place at 10 min.
4. Add 10 ml of 1 M H2SO4 solution and titrate the sample with thiosulfate until the solution
becomes pale yellow. Introduce 5 drops of starch indicator, and titrate with constant stirring to
the disappearance of the blue colour.
5. Read the burette mark (VST).
6. Repeat titration also two times. Calculate the median volumes of used sodium thiosulfate
standard solution.
7. Calculate formaldehyde percentage in sample:
xHCHO =
M.m. HCHO = 30,02;
(VI 2 N I 2 VST N ST ) meq HCHO
meqHCHO = M/2.
VS
100%

Iodometry

Uploaded by

Copyright:

Available Formats

Iodometry

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Iodometry

Uploaded by

Copyright:

Available Formats

Iodometry.

Titration with Sodium Thiosulfate

I. Standardisation of Sodium Thiosulfate Against Potassium Dichromate

1. Preparation of 0,02 N Potassium Dichromate Standard Solution

2. Standardisation of Sodium Thiosulfate Solution

II. Iodine Determination

III. Back-titration of Formaldehyde with Iodine

(VI 2 N I 2 VST N ST ) meq HCHO

You might also like