Scribd
Upload
27 views

Assignment 1

This document contains an assignment for a robotics and automation course. It includes 5 problems related to forward and inverse kinematics of robotic manipulators: 1. Compute the end position of a 2-joint manipulator given the joint lengths and angles. 2. Assign coordinate frames and fill out a parameter table for a 2 degree of freedom robot arm. 3. Determine the joint positions and other parameter values for a manipulator given the end position. 4. Find the new coordinates of a point after it is rotated about an axis. 5. Determine a homogeneous transformation matrix between frames given other transformation matrices.

Uploaded by

Brooke Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Assignment 1

This document contains an assignment for a robotics and automation course. It includes 5 problems related to forward and inverse kinematics of robotic manipulators: 1. Compute the end position of a 2-joint manipulator given the joint lengths and angles. 2. Assign coordinate frames and fill out a parameter table for a 2 degree of freedom robot arm. 3. Determine the joint positions and other parameter values for a manipulator given the end position. 4. Find the new coordinates of a point after it is rotated about an axis. 5. Determine a homogeneous transformation matrix between frames given other transformation matrices.

Uploaded by

Brooke Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FACULTY OF MECHANICAL ENGINEERING

Code Subject: MEM665


Course Title: Robotics and Automation
Semester: Mac July 2015
Assignment 1
Due Date: April 2015
Forward and Reverse Kinematics Problems:1. Consider the forward transformation of two-joint manipulator. Given that the length
of joint 1, L1 = 3m, the length of joint 2, L2 = 2m, the angle 1 = 30o and the angle 2
2= 45o, compute the coordinate position (x and y coordinates) for the end-of-the-arm
Pw.
2.

The robot arm with two degrees of freedom has been designed.
a) Assign coordinate frames as necessary based on D-H representation.
b) Fill out the parameters table
c) Find the UTH matrix.

3. For the manipulator, the end-of-the-arm robot is positioned at a point defined by x =


4m, y = 1m and z = 5m. If the pitch angle = 45o and link 4 is 1m long, the length of
link 1 is 3m, determine the position of joint 4, defined as point P4. Also determine the
values of the other manipulator parameters, length, L and angle and .
4. The coordinates of point P in frame {1} are [3.0 2.0 1.0]T. The position vector P is
rotated about the z-axis by 45o. Find the coordinates of point Q, the new position of
point P.
5. The homogeneous transformation matrices between {i} {j} and {i} - {k}are :-

Determine jTk ?

-End of QuestionsGood Luck

You might also like