Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Butterfly Valves - Compliance Sheet

    Uploaded by

    Avoor Khan
    This document specifies the requirements for two butterfly valves. The valves must be wafer type with 150 lb flanges, made of cast iron or stainless steel materials. They will be used on acidic/alkaline water lines with pressures up to 7 kg/cm2 at temperatures up to 45 degrees C. One valve must fail closed while the other fails open. Both will be pneumatically actuated by a single-acting rotary actuator and controlled by solenoid valves, limit switches, and regulators. Dimensional drawings and data sheets must be provided for the valves, actuators, and accessories.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Butterfly Valves - Compliance Sheet

    Uploaded by

    Avoor Khan
    10 views1 page
    This document specifies the requirements for two butterfly valves. The valves must be wafer type with 150 lb flanges, made of cast iron or stainless steel materials. They will be used on acidic/alkaline water lines with pressures up to 7 kg/cm2 at temperatures up to 45 degrees C. One valve must fail closed while the other fails open. Both will be pneumatically actuated by a single-acting rotary actuator and controlled by solenoid valves, limit switches, and regulators. Dimensional drawings and data sheets must be provided for the valves, actuators, and accessories.

    Original Description:

    BF

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document specifies the requirements for two butterfly valves. The valves must be wafer type with 150 lb flanges, made of cast iron or stainless steel materials. They will be used on acidic/alkaline water lines with pressures up to 7 kg/cm2 at temperatures up to 45 degrees C. One valve must fail closed while the other fails open. Both will be pneumatically actuated by a single-acting rotary actuator and controlled by solenoid valves, limit switches, and regulators. Dimensional drawings and data sheets must be provided for the valves, actuators, and accessories.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    10 views1 page

    Butterfly Valves - Compliance Sheet

    Uploaded by

    Avoor Khan
    This document specifies the requirements for two butterfly valves. The valves must be wafer type with 150 lb flanges, made of cast iron or stainless steel materials. They will be used on acidic/alkaline water lines with pressures up to 7 kg/cm2 at temperatures up to 45 degrees C. One valve must fail closed while the other fails open. Both will be pneumatically actuated by a single-acting rotary actuator and controlled by solenoid valves, limit switches, and regulators. Dimensional drawings and data sheets must be provided for the valves, actuators, and accessories.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    Required

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16

    CHEMANOL CODE
    Valve Type
    Valve Size

    For all items


    Butterfly Wafer Type, On-Off
    for all size

    End Connection
    Service
    Line Pressure
    Line Temp
    Body Material
    Disc Material
    Steam Material
    Seat
    Bonnet
    Seal Leak rate
    Valve Action Fail Position

    Suitable for mounting between ANSI B 16.5 # 150


    Flange
    Acidic/Alkaline water
    7 kg/cm2
    up to 45 deg
    C. I. ASTM A126 B(EPOXY COATED)
    ASTM A351 CF8M (SS 316)
    ASTM A479 SS 410
    EPDM
    Standard
    class VI
    Closed 1 no & open 1no

    Operation
    Air supply

    Single Acting, Pneumatic Rotary Actuator (100 % Travel complete Model


    stop Arragement)
    no. & Make
    Aavailble 7 kg/cm2 at site

    Solenoid Valve
    Limit Switch
    Air regulator

    Direct Acting 3/2 way,110 V AC ,6 Watts ,IP - 65


    complete Model
    Corrosion Resistant,MOUNTING: Separate Inside
    no. & Make
    Solenoid
    Boxproximity
    ( not on the
    valve
    )
    limit
    switch
    type
    ( model
    NBN4-12-GM-40-ZO,
    MAKE: P&F) WITH JB
    complete Model
    no. & Make
    air regulator with PG. connection size 1/4" F.

    17
    18
    19
    20

    Manual hand wheel

    Required ( with proper locking)

    kindly send dimension Drawing , data sheet for valve , actuator &
    accessories.
    Total Qty 2 no : Required Valve Action Fail Position 1 close & 1 open

    complete Model
    no. & Make
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.
    Pls.

    confirm
    confirm
    confirm
    confirm
    confirm
    confirm
    confirm
    confirm
    confirm
    confirm

    complete Model
    no. & Make

    You might also like