Configurazione VoIP
Configurazione VoIP
Section:
Line Settings
Services:
[ ] Enable Call Waiting
[ ] Enable 3-Way Calling
[ ] Enable Message Waiting Indication
[ ] Enable Do Not Disturb
[ ] Enable Call Forwarding Always
[ ] Enable Call Forwarding On Busy
[ ] Enable Call Forwarding on No Answer
Sip Proxy:
[X] Use SIP Proxy
[X] Register with Proxy
[X] Use Proxy Address as User Agent Domain
Outbound Proxy:
[ ] Use Outbound Proxy
PSTN Failover:
[ ] Enable PSTN Failover
Advanced SIP Settings:
DTFM Transmission Method: Out-of-Band by Negotiation (RFC2833)
Compatibility Mode: Off
Silence Suppression:
[ ] Enable Silence Suppression
[ ] Enable Comfort Noise
Echo Cancellation:
[ ] Enable Echo Cancellation
Section:
Advanced
Signaling Protocol:
Signaling Protocol: SIP
Local SIP Port: 5060 or 5061 See NOTE #1
[ ] Use Strict SIP Message Checking
[X] Enable transparent SIP Mode
[ ] Enable Server lool-up
Prack (100rel message): none
Enable Sip on Interface: Leave blank See NOTE #2
[ ] Disable Sip Alg
[ ] Enable T.38
RTP:
Local RTP Port Range - Contiguous...: 5004
Quality of Service:
Type Of Service (Hex): 0xb8
[ ] Use MSS Clamping to Reduce Voice Delay
Codecs:
Supported Codecs;
Packetization Time; Priority
[ ] G.711, 64kbps, u-Law; 20;
1
[X] G.711, 64kbps, A-Law; 20;
2
[ ] G.723, 5.3/6.3kbps;
20;
1
[X] G.729, 8kbps;
20;
1
[ ] G.726-32, 32kbps;
20;
1
DSP Country:
DSP Country: Italy
Jitter Buffer:
Type: Adaptive
Minimum Size: 0 ms
Maximum Size: 160 ms
LEGEND:
[ ] Statement: Indicates an unselected option
[X] Statement: Indicates a selected option
Value
: Indicates a value to be inserted into a text box
NOTES:
#1: Specific value depends by ISP. Generally both are valid.
#2: Some ISPs may request a specific Interface dedicated to VoIP
services. In this case you can select it from the drop-down list.
If you haven't yet configured a specific Interface, you can do that
from Network Connection row into the left sided menu.