F 1821 DigitalControls en
F 1821 DigitalControls en
F 1821 DigitalControls en
www.cumminspower.com
www.cumminspower.com
Genset controls
For non-paralleling
applications:
PowerCommand 1301
PowerCommand 3100
PCC1301
PowerCommand 2100
Premium performance with non-linear loads
PCC2100
PCC3100
PowerCommand 3201
PCC3200
PowerCommand microprocessor
controls, available in two levels, are
fully-featured and field-programmable.
All features, settings and adjustments
are software-enabled for easy
installation and operation.
Level 1 control
Configurations
Basic control
OTEC, GTEC
Level 1 control
OTPC, OHPC
Level 2 control
OTPC, CHPC,
OHPC, BTPC
Display Type
LED Indicators
Not Available
Optional
Standard
Programmable genset
Exerciser
Single event
Fixed period
Four cycle choices
Single event
Adjustable period
Adjustable cycle
Eight events
Adjustable period
Adjustable cycle
Under-voltage sensing
3-phase - utility
1-phase - genset
3-phase utility
3-phase genset
Memory of settings
if transfer switch loses
Not Available
Standard
Level 1 and
Level 2 control:
OTPC control
Open transition
Closed transition
Delayed transition
OHPC control
Open transition
Delayed transition
Level 2 control
For critical power and maintenance
requirements, including hospitals and
data centers
Continuously adjustable engine start 0-120 seconds
OTPC control
Open transition
Closed transition
Delayed transition
OHPC control
Open transition
Delayed transition
CHPC control
Closed transition
Delayed transition
BTPC control
Open transition
Closed transition
Delayed transition
Standard
www.cumminspower.com
Model 150
For isolated bus paralleling systems
For low- or medium-voltage isolated bus applications:
Generator sets are switched to facility loads with transfer
switches or interlocked breaker pairs, or provide all the
power for site loads. A full range of standard control and
digital display features include:
Cost-effective and economical full-function Master Control
Full-function digital bus metering
Alpha-numeric operator panel
LED alarm annunciator
Automatic load adding and shedding (optional)
Automatic load demand system
PowerCommand network (optional)
Model 200
For isolated bus paralleling systems
For low- or medium-voltage isolated bus (not utilityparalleled) applications. A wide range of standard control
and digital display features gives you custom control
configurations without the cost:
Full-function Master Control for standby power systems
High-resolution touchscreen
Automatic load adding and shedding
PowerCommand network
Remote user interface (optional)
Model 300
For infinite bus paralleling applications
For low- or medium-voltage isolated bus (not utilityparalleled) and infinite bus (utility-paralleled) applications
ranging from short-term soft power transfer to continuous
paralleling. Standard control and display features include:
Full-function Master Control for infinite bus paralleling
systems
High-resolution touchscreen
Automatic load adding and shedding
PowerCommand network
Remote user interface (optional)
www.cumminspower.com
www.cumminspower.com
www.cumminspower.com
www.cumminspower.com
Modbus
TCP/IP
16 Technical centers
15 Parts distribution centers
550 Distributors
5,587 Sales and service
160 Countries
33,500 Employees
10
www.cumminspower.com
Asia Pacific
10 Toh Guan Road
#07-01
TT International Tradepark
Singapore 608838
Phone 65 6417 2388
Fax 65 6417 2399
Brazil
Rua Jati, 310, Cumbica
Guarulhos, SP 07180-900
Brazil
Phone 55 11 2186 4195
Fax 55 11 2186 4729
China
8 Wanyuan Street
Beijing Economic and
Technological Dev. Area
Beijing 100176
P.R. China
Phone 86 10 6788 2258
Fax 86 10 6788 2285
Europe, CIS, Middle East
and Africa
Manston Park Columbus Ave.
Manston Ramsgate
Kent CT 12 5BF
United Kingdom
Phone 44 1843 255000
Fax 44 1843 255902
India
35A/1/2, Erandawana
Pune 411 038
India
Phone 91 020 6602 7525
Fax 91 020 6602 8090
Mexico
Eje 122 No. 200 Zona Industrial
San Luis Potos, S.L.P. 78395
Mexico
Phone 52 444 870 6700
Fax 52 444 824 0082
Latin America
3350 Southwest 148th Ave.
Suite 205
Miramar, FL 33027
USA
Phone 1 954 431 5511
Fax 1 954 433 5797
North America
1400 73rd Ave. NE
Minneapolis, MN 55432
USA
Phone 1 763 574 5000
Fax 1 763 574 5298
www.cumminspower.com
2007 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of
Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation. The Power of One, PowerCommand iWatch,
PowerCommand Pulse, InPower and Our energy working for you. are trademarks of Cummins Power Generation. Other company, product,
or service names may be trademarks or service marks of others. Specifications are subject to change without notice. F-1821 (11/07) CPE-200