Scribd
Upload
61 views

Design Rotation Reflection

This technical report template provides guidance for submitting a reflection on a completed project. The reflection must include three paragraphs: (a) describing the applications used to create the project, (b) detailing a problem encountered and how it was addressed, and (c) noting any changes that could be made. The rubric assesses reflections on their demonstration of analysis, reflection, and fulfillment of the requirements.

Uploaded by

api-288140208
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
61 views

Design Rotation Reflection

This technical report template provides guidance for submitting a reflection on a completed project. The reflection must include three paragraphs: (a) describing the applications used to create the project, (b) detailing a problem encountered and how it was addressed, and (c) noting any changes that could be made. The rubric assesses reflections on their demonstration of analysis, reflection, and fulfillment of the requirements.

Uploaded by

api-288140208
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Report/ Reflections

PROJECT NAME:
NAME:
The purpose of the reflection is for you to get a better understanding for your completed project, reflect on the process on
creating your project and to describe problems that you encountered and how you solved them.
Each Project requires you to submit a reflection using this template.
After writing your reflection, fill in the rubric using the set criteria.
Hand in report with your assignment.

Each reflection must include the following:


a. A paragraph explaining which application(s) you used to create the project. This is not a step-by-step
how-to response; it is rather a general description of the application and process you used.
(E.g. After creating a box, using the rectangle tool. I used the convert to curves tool and modified the box
with the shape tool, until I achieved my desired shape)
b. Write a brief paragraph describing a problem that occurred during the project. What specific
obstacles(s) did you run into? How did you handle it?
c. After completing your assignment, what would you of liked to change on your work?
CATEGORY

Technical
Report/Reflection

a)

2
Demonstrated limited
reflection and analysis.

3
Demonstrated some
reflection and analysis.
Met some of the
requirements.

4
Demonstrated
moderate reflection
and analysis. Met
most of the
requirements.

MARK

Demonstrated
thoroughly reflection
and analysis. Met all of
the
Requirements.

The first thing that I used to create this project was Corel Draw. First I used the free draw tool to draw a long shape.
Then I went to rotate and choose a degree and duplicated my shape in a circle pattern. Next I positioned the middle of the
shape offset on the page. I then used the shaping tool to cut off any excess shape. Lastly I created a white box and a black
box and a frame to add a border and frame around the shape. After I exported all the parts to Photoshop I assembled
them into the finished product. I made a copy of it and airbrushed the copy so that it was coloured.
b) One problem that occurred during the project was trying to find the right angle to duplicate my shape because if it the
angle is too small then the shapes will touch but if it is too big then it wont look good. I had to keep experimenting to
find the best angle.
c) I think that it was good and there isnt anything that I think really needed to be changed.

You might also like