0% found this document useful (0 votes)
111 views4 pages

Tutorial Sheet - 1

This document provides 10 tutorial problems on circuit analysis concepts including: 1) Calculating resistance and conductance using power equations 2) Finding power absorbed by an element using resistance, current source, and voltage source 3) Using superposition theorem to find a voltage 4) Transforming a current source to a voltage source and calculating current and power 5) Finding Thevenin's and Norton's equivalents to analyze circuits

Uploaded by

Sourav Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views4 pages

Tutorial Sheet - 1

This document provides 10 tutorial problems on circuit analysis concepts including: 1) Calculating resistance and conductance using power equations 2) Finding power absorbed by an element using resistance, current source, and voltage source 3) Using superposition theorem to find a voltage 4) Transforming a current source to a voltage source and calculating current and power 5) Finding Thevenin's and Norton's equivalents to analyze circuits

Uploaded by

Sourav Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tutorial Sheet 1

1. Find R1 and G in the circuit shown below (Fig 1), if the 5 A source is supplying 100 W
and the 40 V source is supplying 500 W. (Ans: R1 = 32 , G = 0.096 S)

Fig 1.
2. Find the power absorbed by the element X in the circuit shown below (Fig 2), if the
element X is:
a) 4 k resistance.
b) 20 mA independent current source with reference arrow downward.
c) 60 V independent voltage source with positive polarity upward.
(Ans: a) 0.4 W; b) 0.6 W; c) 0.6 W)

Fig 2.
3. Use Superposition theorem to evaluate Vx in the given circuit. (Ans: Vx = 96 V)

Fig 3.

4. a). If RL = 2 , find iL and the power supplied by the 4 A source.


b). Transform the practical current source (4 A, 8 ) into a practical voltage source and find
iL and the power supplied by the new ideal voltage source.
c) What will be the value of RL for it to absorb maximum power and what is the value of
that power?
(Ans: a) 2.6 A, 44.8 W; b) 2.6 A, 83.2 W; c) 8 , 21.125 W)

Fig 4.
5. Find the Thevenins equivalent of the circuit shown in Fig 5. Find the value of RL
connected across a and b so that it draws maximum power. (Ans: 130 V, 30 )

Fig 5.
6. Obtain the Nortons equivalent of the circuit shown in Fig 6 across the terminals A and B.
(Ans: IN = 2 A, RN = 4 )

Fig 6.

7. Calculate the current in the 40 resistance in the network shown below: (Ans: 0.047 A)

Fig 7.
8. Use Thevenins theorem to find the current in the 40 resistance connected between B and
D.
(Ans: 11.465 mA from B to D)

Fig 8.
9. Calculate the potential difference across the 2 resistance in the network shown below:
(Ans: 2.1 V)

Fig 9.
10. In the network shown in Fig 11, calculate the equivalent resistance:
a) Between A and B
b) Between A and N.
(Ans: a) 2.8654 , b) 1.5540 )

Fig 10.

You might also like