Scribd
Upload
75 views

Well Access Landing String

Well Access Landing String

Uploaded by

madonnite3781
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

Well Access Landing String

Well Access Landing String

Uploaded by

madonnite3781
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

TECHNICAL DESCRIPTION

LANDING STRING

Landing String

FMC Technologies Well Access Landing String (LS) system is the primary well control barrier during
a range of subsea operations. This can be during a development well test, a well completion, or
when conducting any subsequent well intervention operations on subsea trees. It is configurable for
FMCTechnologies Enhanced Horizontal and Vertical subsea tree systems in addition to legacy and
othersuppliers equipment.
The system is designed and qualified in compliance with the industrys highest standards, including
ISO13628-7. FMC Technologies provides full system integration of the LS with the subsea equipment
andvessel to reduce complexity of interface management and therefore minimize operational risk.

TECHNICAL DESCRIPTION

LANDING STRING

Landing String system


FMC Technologies close ties with customers has
led to the development of world class systems
andproducts, enabling our clients to operate
in regions and environments that only recently
exceeded the critical limits of current technology.
Well integrity with fatigue management is a key
driver for our system design, which ties in with
FMC Technologies philosophy of providing total
system integration.

Technical description
The FMC Technologies Landing String (LS) is a
10,000 psi rated system with a nominal bore
of71/16.
The system complies with ISO13628-7, has
the capability for Safety Integrity Level 2
(SIL2) control of Production Shut-down (PSD),
EmergencyShutdown (ESD) and Emergency
QuickDisconnect (EQD), while delivering
accelerated response times.
It is configurable tosuit Anchored, Dynamically
Positioned and Jack-up Vessels.

Utilizing FMC Technologies LS system,


operators can benefit from:
Reduced operational costs with less offshore
personnel
Reduced third party equipment on the vessel.
Reduced operational risk through system
integration
Reduced operational risk through SIL-2 rated
fast response control system
Reduced risk and maximum operating envelope
through use of optional Riser Monitoring and
Management system
2

TECHNICAL DESCRIPTION

LANDING STRING

System Specification
Installation Workover Control System:
Multimode Hydraulic Power Unit/Master Control
Panel rated for SIL-2 PSD, ESD and EQD
Subsea tree umbilical and reel system with
umbilical disconnect system
LS umbilical and reel system
Lubricator Valve umbilical and reel system
Surface Flow Tree umbilical
Umbilical Deck Jumpers and Emergency
Shutdown Panels
Electro Hydraulic Workover Control Module
(WOCM) - optional
Riser Monitoring and Management system
optional

Surface Equipment:

Landing String Equipment:

(ISO13628-7 rated)

(ISO13628-7 rated)

7 1/16 10,000 psi SIL-2 rated Surface Flow Tree


(SFT) for ESD

7 1/16 10,000 psi Single or Dual Lubricator


Valves, configurable (dual high set or
1high/1low)

Wireline / Coil Tubing adapter

7 1/16 10,000 psi Retainer Valve

Swivel

7 1/16 10,000 psi Subsea Test Tree rated


to cut and seal wireline, braided wire and
coiledtubing

Riser Slick Joint also called Cased Wear Joint


Upper Tension and Stress Joints
Tension Frame optional

Vessel BOP specific Shear Sub, Slick Joint


andTHRT Adapter configured to suit end
userrequirements.

Riser System:
(ISO13628-7 rated)
7 1/16 10,000 psi non-rotating union nut
adapter joints for the Riser Slick Joint, Lubricator
Valves, Landing String Accumulator Module and
the Retainer Valve
Casing Riser Joints optional
Union Nut Riser Joints optional

TECHNICAL DESCRIPTION

LANDING STRING

Landing String system overview

TECHNICAL DESCRIPTION

LANDING STRING

In riser system
The Lubricator Valve (LV) is a ball valve controlled by a separate control umbilical which
canbe configured as single or dual assemblies.
It is a working valve which allows long wireline or perforating assemblies to be rigged up
and run into the well.
The LV therefore allows the Landing String to be used in lieu of very long wireline lubricator
assemblies above the surface flowhead. It therefore saves time and improves job safety.
Designed to withstand dropped object impact from above (i.e. tools).
Chemical injection porting is also provided both between and below the valves if required.

Retainer valve
The Retainer Valve (RV) sits above the Subsea Test
Tree (SSTT) in the LS assembly, immediately above
theShearSub.
It closes (cuts and seals wireline and/or coil tubing)
justprior to unlatching the SSTT, preventing
hydrocarbons from migrating directly to the drill floor.
It also vents the pressure between the closed SSTT and the closed RV.
Thisprevents lift-off of the LS assembly when the SSTT latch is released.
The RV Assembly includes a ported slick body below the main valve body
suitablefor BOP annular bag, this body could be configured above the valve
bodyif BOP space out demands.

Subsea Test Tree


The SSTT acts as the main safety barrier towards the well.
Provides cutting capability for coiled tubing, wireline & slickline.
Two fail safe close ball valves, each able to isolate & contain maximum well bore pressure
from below (and above).
Annular and production bore well control below closed BOP pipe ram.
Pump through capability from above.
Provides a safe mechanism for disconnection & reconnection of the LS, with full hydraulic
& electric communication, while within the BOP stack.
Chemical injection port supplied between the valves.
SSTT Latch includes a Latch Verification feature, to ensure successful subsea re-latch prior
to resuming operations.
5

TECHNICAL DESCRIPTION

LANDING STRING

IWOCS HPU/MCP
No single failure in the IWOCS will cause an
unintended system shut-down, unacceptable
risk for personnel safety, environment or loss of
financial assets.
HPU/HDU/MCP can be one or several containers,
typical 12-35ft. They are DNV 2.7-1 certified and
A60 fire rated containers, with a control room
section and a hydraulic section.
Shutdown, PSD/ESD/EQD panels are included in
system.
Remote control panel for installation in driller
cabin will show the same information as HMI in
MCP control room.
Redundant communication, A and B side with
WOCM on EDP and SCM on Tree, is typically
signal on power.
SIL-2 rated safety system.

Landing String Module


The Landing String Module (LAM) is a SIL-2
rated Electro Hydraulic control module for both
ESD and EQD of the LS.
It facilitates a high speed response with large
flow control valves providing EQD operation in
less than 15 seconds (inclusive of wire and coil
tubing cutting).
Redundancy is included to ensure that no single
failure will compromise the system safety.
The LAM system is optional and can be
ommitted to operate direct hydraulic only for
selective operations.

TECHNICAL DESCRIPTION

LANDING STRING

Umbilicals and reels


In riser Landing String (Electro Hydraulic
comms) and Lubricator Valve (Hydraulic comms)
umbilicals are optimized for size to minimize
risk of damage.
Open water umbilicals (Electro Hydraulic
andOptic comms) are multifunction
standardized designs that maximize flexibility
for FMCTechnologies and other suppliers
subsea tree production control systems.
Umbilical reels can be delivered electrically or
pneumatically, and driven by local and remote
control panel.
They can all be run manually or have a
constanttension.

Tubing Hanger Running Tool


and Test Stand
Subsea Test Tree
Emergency Disconnect
Rig project specific shear joint
Slick Joint
Retainer Valve

TECHNICAL DESCRIPTION

FMC Technologies, Inc.


1777 Gears Road
Houston, Texas 77067
P: +1 281.591.4000
www.fmctechnologies.com
2014 FMC Technologies. All rights reserved.

LANDING STRING

You might also like