Nuvi200 OwnersManual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 50

owners manual

nvi 200 and 200W Series

for use with these nvi models:


200, 200W, 250, 250W, 260, 260W, 270

2008 Garmin Ltd. or its subsidiaries


Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Tel. (913) 397.8200 or (800)
800.1020
Fax (913) 397.8282

Garmin (Europe) Ltd.


Liberty House
Hounsdown Business Park,
Southampton, Hampshire, SO40
9RB UK
Tel. +44 (0) 870.8501241 (outside
the UK)
0808 2380000 (within the UK)
Fax +44 (0) 870.8501251

Garmin Corporation
No. 68, Jangshu 2nd Road,
Shijr, Taipei County, Taiwan
Tel. 886/2.2642.9199
Fax 886/2.2642.9099

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express
prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual
onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any
revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of
this copyright notice and provided further that any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve
its products and to make changes in the content without obligation to notify any person or organization of such
changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental
information concerning the use and operation of this and other Garmin products.
Garmin, the Garmin logo, nvi, and MapSource are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. Garmin Lock and myGarmin are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used without the express permission of Garmin.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a registered trademark of Apple Computer, Inc. SD and microSD are trademarks of the SD Card
Association.

October 2008

Part Number 190-00752-10 Rev. A

Printed in Taiwan

Introduction

Introduction
Manual Conventions

When you are instructed to touch


something, use your finger to touch
an item on the screen.
The small arrows (>) used in the
text indicate that you should touch a
series of items. For example, if you
see touch Where to? > Favorites
you should touch Where to?, and
then touch Favorites.
On some nvi units, some buttons
are not labeled. For example, your
nvi might have a
button, but
this manual will use the word Tools.
Software on your nvi could
differ from the screen shots and
instructions in this manual.

nvi Tips and


Shortcuts

To quickly return to the Menu


page, touch and hold Back.
Touch
and
to see
more choices. Touch and hold
these buttons to scroll faster.

myGarmin

Go to http://my.garmin.com to access
the latest services for your Garmin
products:
Register your Garmin unit.
Subscribe to online services for
safety camera information (see
page 32).
Unlock optional maps.

nvi 200 and 200W series owners manual

Introduction

Introduction........................... i
Manual Conventions.....................i
nvi Tips and Shortcuts...............i
myGarmin . ................................i
Caring for Your nvi . .................iv

Getting Started..................... 1

Step 1: Mount Your nvi............. 2


Step 2: Configure Your nvi........ 3
Step 3: Acquire Satellites........... 3
Step 4: Use Your nvi................. 3
Finding Your Destination............ 4
Adding a Stop............................. 5
Taking a Detour.......................... 5
Stopping the Route..................... 5
Adjusting the Volume.................. 5
Locking the Screen..................... 5

Where to?............................. 6

Go! Page Options....................... 6


Finding an Address..................... 6
Setting a Home Location............ 7
Finding a Place by Spelling the
Name ...................................... 7
ii

Finding Recently Found


Places...................................... 8
Favorites..................................... 9
Finding a Place Using
the Map.................................. 10
Entering Coordinates................ 10
Searching Near Another
Location..................................11
Navigating Off Road..................11
Walking to a Destination............11

Using the Map.................... 12

Trip Computer........................... 13
Turn List.................................... 13
Next Turn.................................. 13

Managing Files................... 14

Supported File Types................ 14


Loading Files............................ 14
Deleting Files . ......................... 15

Using the Tools.................. 16

Settings.................................... 16
Help.......................................... 16

nvi 200 and 200W series owners manual

Introduction

Picture Viewer.......................... 16
Calculator ................................ 17
Currency Converter.................. 17
Unit Converter ......................... 18
World Clock ............................. 19

Customizing the nvi........ 20

Changing the System


Settings.................................. 20
Adjusting the Display
Settings.................................. 21
Changing the Navigation
Settings.................................. 21
Updating the Time Settings...... 22
Setting the Languages............. 22
Changing Security Settings...... 23
Changing the Map Settings...... 23
Changing the Proximity Points
Settings.................................. 24
Restoring All Settings............... 24

Appendix............................ 25

Avoiding Theft........................... 25
Locking Your nvi..................... 25

Calibrating the Screen.............. 26


Resetting Your nvi.................. 26
Updating the Software.............. 27
Clearing User Data................... 27
Battery Information .................. 28
Charging Your nvi................... 28
Changing the Fuse................... 29
Removing the nvi and
Mount..................................... 29
Mounting on Your
Dashboard............................. 30
Additional Maps........................ 30
About GPS Satellite Signals..... 31
Extras and Optional
Accessories............................ 31
Garmin Travel Guide................ 33
Contact Garmin........................ 33
Specifications........................... 34
Declaration of Conformity......... 36
Software License Agreement... 36
Troubleshooting . ..................... 37

Index................................... 40

nvi 200 and 200W series owners manual

iii

Introduction

Caring for Your nvi

Your nvi contains sensitive


electronic components that can be
permanently damaged if exposed
to excessive shock or vibration. To
minimize the risk of damage to your
nvi, avoid dropping your unit and
operating it in high-shock and highvibration environments.
Cleaning the Unit
The nvi is constructed of highquality materials and does not
require user maintenance other than
cleaning. Clean the outer casing
of the unit (not the touch screen)
using a cloth dampened with a mild
detergent solution, and then wipe
it dry. Avoid chemical cleaners and
solvents that can damage plastic
components.

iv

Cleaning the Touch Screen


Clean the touch screen with a soft,
clean, lint-free cloth. Use water,
isopropyl alcohol, or eyeglass
cleaner, if needed. Apply the liquid
to the cloth, and then gently wipe the
touch screen.
Protecting Your nvi
Do not store the nvi where
prolonged exposure to extreme
temperatures can occur, because
it can cause permanent damage.
Do not expose the nvi to water.
Contact with water can cause this
unit to malfunction.
Although a PDA stylus can
be used to operate the touch
screen, never attempt this while
operating a vehicle. Never use a
hard or sharp object to operate
the touch screen because damage
might result.
nvi 200 and 200W series owners manual

Getting Started

Getting Started
See the product documentation in the product box for product warnings and other
important information.

Power key:
Slide to the left to turn the nvi on/off;
slide to the right to lock the screen.

Mini-USB connector

Speaker
Designed in USA
Made in Taiwan
02

CAN 310

255w

BLK

17W000000

RESET

N9

Memory card
slot (equipped
for either an
SD card or a
microSD card)

Reset button. See page 26.

Button Locations
The nvi 200W series unit is shown in the image above. The nvi 200 series
units have the Power key on the right. The nvi 200W series units have the
Power key on the left.
The nvi 200 series units may have the Reset button on the left, if present. The
nvi 200W series units may have the Reset button on the right, if present. See
page 26 for more information about resetting your nvi.
nvi 200 and 200W series owners manual

Getting Started
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit
from the vehicle when exiting or store it out of direct sunlight.
Before mounting the nvi, see the product documentation for information about laws pertaining
to windshield mounting.

Step 1: Mount Your nvi

1. Plug the vehicle power cable into the back of your nvi.
Suction cup mount
2. Snap the cradle onto the suction cup arm.
3. Remove the clear plastic from the suction
Cradle
cup. Clean and dry your windshield and the
suction cup with a lint-free cloth. Press the
suction cup firmly on the windshield.
4. Flip the lever back toward the windshield.
Lever
5. Fit the bottom of your nvi into the cradle.
6. Tilt your nvi back until it snaps into place.
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it is
Vehicle power
plugged in and the vehicle is running.
cable



nvi 200 and 200W series owners manual

Getting Started

Step 2: Configure Your


nvi
To turn your nvi on, slide the
Power key to the left. Follow the
on-screen instructions. To turn your
nvi off, slide the Power key to
the left.

Step 3: Acquire
Satellites

1. Go outdoors to an open area,


away from tall buildings and
trees.
2. Turn on your nvi.
Acquiring satellite signals can take a
few minutes. The
bars indicate
satellite strength. When at least one
of the bars is green, your nvi has
acquired satellite signals. Now you
can select a destination and navigate
to it.

Step 4: Use Your nvi


NOTE: Software on your nvi
could differ from the screen
shots in this manual.

nvi 200 and 200W series owners manual

GPS satellite strength


Battery status
Current time. Touch to change
time settings.
Touch to find a destination.
Touch to view the map.
Touch to use the tools such as
settings and Help.
Touch to adjust the volume.

Getting Started

Finding
Your
Destination

The Where to? menu provides


several different categories for you
to use when searching for addresses,
cities, and other locations. The
detailed maps loaded in your nvi
contain millions of points of interest,
such as restaurants, hotels, and auto
services.

3. Select a subcategory.

4. Select a destination.

1. Touch Where to?.


5. Touch Go!.
tip: Touch
and
see more choices.

to

2. Select a category.


nvi 200 and 200W series owners manual

Getting Started

Adding a Stop

You can add a stop (called a Via


Point) to your route. The nvi gives
you directions to the Via Point and
then to your final destination.

you are currently taking is the only


reasonable option, the nvi might not
calculate a detour.

Stopping the Route

1. With a route active, touch


Menu > Where to?.
2. Search for the extra stop.
3. Touch Go!.
4. Touch Add as Via Point to
add this stop before your
destination. Touch Set as new
Destination to make this your
final destination.

1. With a route active, touch


Menu.
2. Touch Stop.

Taking a Detour

Locking the Screen

1. With a route active, touch


Menu.
2. Touch Detour.
The nvi attempts to get you
back on your original route as
quickly as possible. If the route

Adjusting the Volume

From the Menu page, touch Volume


(or
). Touch
and
to adjust
the volume. Touch the box next to
Mute to mute all audio.

To prevent accidental screen touches,


slide the Power key to the right
( ). To unlock the screen, slide the
Power key to the center position.

nvi 200 and 200W series owners manual

Where to?

Where to?

Finding an Address

The Where to? menu provides


several different categories you can
use to search for locations. To learn
how to perform a simple search, see
page 4.

Go! Page Options

Touch to start navigating the


route.
Touch to view this location and
surrounding areas on the map.
Touch to save this location to
your Favorites.



1. Touch Where To? > Address.


2. Change the state, country, or
province, if necessary.
3. Touch Spell City, enter the
city/postal code, and touch
Done. Select the city/postal
code in the list. (Not all map
data provides postal code
searching.) If you are unsure
of the city, touch Search All.
4. Enter the number of the
address, and touch Done.
5 Enter the street name, and
touch Done.
6. Select the correct street in the
list, if necessary.
7. Touch the address, if
necessary.

nvi 200 and 200W series owners manual

Where to?

note: Depending on the


version of the maps loaded on
your nvi, the button names
can change and some steps
could be ordered differently.

Setting a Home
Location

Set your home location for the place


you return to most often.
1. To set your home location,
touch Where to? > (Favorites
>) Go Home.
2. Select an option:
Enter your address.
Use your current location.
Choose from a list of
recently found locations.

Going Home
To navigate home after you have set
your home location, touch Where
to? > Favorites > Go Home.

Finding a Place by
Spelling the Name

If you know the name of the


destination you are looking for,
you can spell it using the on-screen
keyboard. You can also enter letters
contained in the name to narrow the
search.
1. Touch Where to? > Points of
Interest > Spell Name.
2. Using the on-screen keyboard,
enter letters of the name of
your destination. Touch Done.

nvi 200 and 200W series owners manual

Where to?

Using the On-Screen


Keyboard
When an on-screen keyboard
appears, touch a letter or number to
enter it.

Touch
to add a space. Touch
to delete a character. Touch and hold
to erase the entire entry.
Touch Mode to select the keyboard
language mode. Touch 123 to enter
numbers and special characters.



Finding Recently
Found Places

Your nvi stores the last 50 of your


recent finds in the Recently Found
list. The most-recently viewed places
appear at the top of the list. Touch
Where to? > Recently Found to
view your recently found items.
Deleting Recently Found
Places
To remove all places from the
Recently Found list, touch Clear >
Yes.
Note: When you touch
Clear, all items in the list are
removed. This process does
not delete the actual place
from your nvi.

nvi 200 and 200W series owners manual

Where to?

Fa
vorites

You can save places in your


Favorites so you can quickly find
them and create routes to them.
Your home location is also stored in
Favorites.

Editing Saved Places


1. Touch Where to? >
Favorites.
2. Touch Edit.
3. Touch an item to edit:

Saving Your Current Location


From the Map page, touch .
Saving Places You Find
1. From the Go! page, touch
Save.
2. Touch OK. The place is saved
in Favorites.
Finding Saved Places
1. Touch Where to?.
2. Touch Favorites. Your saved
locations are listed.

nvi 200 and 200W series owners manual

Change Nameenter
a new name, and touch
Done.
Change Map Symbol
touch a new symbol used
to mark this location on the
map.
Change Phone Number
enter a phone number, and
touch Done.
Deletetouch Yes to
remove this item from the
Favorites list.

Where to?

Finding a Place Using


the Map
Use the Browse Map page to view
different parts of the map. Touch
Where to? > Browse Map.

Tips for Browsing the Map


Touch the map, and drag to view
different parts of the map.
Touch and to zoom in and
out.
Touch any object on the map.
An arrow appears pointing at the
object.
Touch Save to save this location.
Touch Go! to navigate to the
location.
If the GPS mode is off, touch Set
Loc to set your location to the
selected location. (See page 20.)

10

Entering Coordinates

If you know the geographic


coordinates of your destination, you
can use your nvi to navigate to your
destination using the latitude and
longitude coordinates. This can be
especially helpful when geocaching.
1. Touch Where to? >
Coordinates.
2. Touch a box to enter a
coordinate.
3. Touch Format to change the
type of coordinates. Because
different maps and charts use
different coordinate formats,
the nvi allows you to select
the correct coordinate format
for the type of map you are
using.
4. Enter the coordinates, and
touch Next.
nvi 200 and 200W series owners manual

Where to?

Searching
Near
Another Location

1. Touch Where to? > Near.


2. Select an option:
Where I Am Nowsearch
near your current location.
A Different Citysearch
near the city you enter.
My Current Route
search along your active
route.
My Destinationsearch
near your current
destination.

Navigating Off Road

If you are not following roadways


as you navigate, use Off Road
mode. Touch Tools > Settings >
Navigation > Route Preference >
Off Road > OK.

Walking to a
Destination

If you are walking to your


destination, use Pedestrian mode
to optimize your route for walking.
Touch Tools > Settings > System >
Usage Mode > Pedestrian > OK.

nvi 200 and 200W series owners manual11

Using the Map

Using the Map


Your route is marked with a
magenta line. As you travel, your
nvi guides you to your destination
with voice prompts, arrows on the
map, and directions at the top of the
map. A checkered flag marks your
destination.
If you depart from the original route,
your nvi recalculates the route and
provides new directions.

Touch to view the turn list.

Touch to zoom in and zoom


out.
Touch to save your current
location.
Touch to view the trip
computer.

12

nvi 200 and 200W series owners manual

Using the Map

Trip Computer

The trip computer displays your


current speed and provides helpful
statistics about your trip.
To view the trip computer, touch the
Speed field on the map.
If you make frequent stops, leave the
nvi turned on so it can accurately
measure elapsed time during the trip.
Resetting the Trip Computer
Reset the trip computer before
beginning a trip. From the map,
touch the Speed field. Touch Reset
Trip to reset the information on the
trip computer. Touch Reset Max to
reset the maximum speed.

Turn List

When you are navigating a route,


the turn list displays turn-by-turn
instructions for your entire route and
the distance between turns.
Touch the text bar on the top of the
map to open the turn list. Touch
a turn on the list to view the next
turn page for that turn. Touch Show
Map to view the entire route on the
browse map page.

Next Turn

When you are navigating a route, the


next turn shows the turn on the map
and the distance and time left before
you reach the turn.
To view an upcoming turn on the
map, touch any turn from the turn
list.

nvi 200 and 200W series owners manual13

Managing Files

Managing Files

Loading Files

Step 1: Insert a Memory Card


(Optional)
To insert or remove the memory
card, press it in until it clicks.

You can store files, such as JPEG


image files, in the internal memory
on the nvi or on a memory card.
Note: The nvi is not
compatible with Windows 95,
98, Me, or Windows NT. It is
also not compatible with Mac
OS 10.3 and earlier. This is a
common limitation of most
USB mass storage devices.

Supported File Types

JPEG and JPG image files: see


page 16
Maps and GPX waypoint files
from MapSource: see page 30
GPI custom POI files from
Garmins POI Loader: see page
31
14

Step 2: Connect the USB


Cable
The USB cable is an optional
accessory. To purchase the USB
cable and other accessories, go to
http://buy.garmin.com or contact
your Garmin dealer.
Connect the mini-USB connector
to the back of the nvi. Connect the
larger end of the cable to an available
USB port on your computer.
Your nvi and memory card
appear as removable drives in My
Computer on Windows computers
and as mounted volumes on Mac
computers.

nvi 200 and 200W series owners manual

Managing Files

Note: Some operating


systems or computers with
multiple network drives can
not display the nvi drives.
See your operating system
Help file to learn how to map
the drives.
Step 3: Transfer Files to Your
nvi
Copy and paste files from your
computer into the nvi drives/
volumes.
1. Browse your computer for the
file you want to copy.
2. Highlight the file, and click
Edit > Copy.
3. Open the Garmin or memory
card drive/volume.
4. Click Edit > Paste. The file
appears in the list of files in
the nvi memory or on the
memory card.

Step 4: Eject and Unplug the


USB Cable
When you are finished transferring
files, click
in your toolbar
(system tray), or drag the volume
icon to the Trash on Mac
computers. Unplug your nvi from
your computer.

Deleting Files

Connect the nvi to your computer,


and open the nvi or memory card
drive/volume. Highlight the file you
want to delete, and press the Delete
key on the computer keyboard.
Caution: If you do not
know the purpose of a file,
do not delete it. Your nvi
memory contains important
system files that should not be
deleted.

nvi 200 and 200W series owners manual15

Using the Tools

Using the Tools


The Tools menu provides many
features that are helpful when you
are traveling. From the Menu page,
touch Tools (or
) to access the
Tools menu.

Settings

For information about the settings,


see pages 2024.

Help

Touch Help to get information about


using your nvi.

16

Picture Viewer

Use the picture viewer to view


pictures that you have stored in your
nvi or on a memory card.
1. Touch Tools > Picture
Viewer.
2. Touch a picture to view a
larger image of it.
3. Touch the arrows to view all
the images.
Viewing a Slide Show
Touch Slide Show to start a slide
show, which displays each image for
a few moments and then displays the
next image.
Touch anywhere on the screen to
stop the slide show. Touch Stop to
return to the list of pictures. Touch
Resume to resume the slide show.
Touch
and
to zoom out
and to zoom in.
nvi 200 and 200W series owners manual

Using the Tools

Calculator

1. Touch Tools > Calculator.


2. Enter the first number of your
calculation.
3. Touch an operator (, , -, or
+).
4. Enter the second number of
your calculation.
Touch . to add a decimal.
Touch to make the
number negative or
positive.
Touch % to make the
number a percent (0.01).
Touch C to clear the entry.
5. Touch =.
6. Touch C to perform a new
calculation.

Currency Converter

1. Touch Tools > Currency


Converter.
2. Touch a currency button to
change the currency.
3. Select a currency, and touch
OK.
4. Touch the rectangle next
to the currency you want to
convert.
5. Enter the number. Touch
Done.
6. Touch Clear to convert a
different value.
Tip: Touch and hold
erase the entire entry.

to

nvi 200 and 200W series owners manual17

Using the Tools

Updating Conversion Rates


The nvi allows you to update the
currency conversion rates manually
so that you are always using the most
current rates.
1. Touch Tools > Currency
Converter > Update.
2. Touch the rate you want to
update.
3. Touch
to erase the current
rate. Enter a new rate, and
touch Done.
4. Touch Save to finish.
Tip: Touch Restore to use the
original rate.

18

Unit Converter

1. Touch Tools > Unit


Converter.
2. Touch Conversion, select a
type of measurement, and
touch OK.
3. Touch a unit of measure that
you want to change.
4. Select a unit of measure,
and touch OK. Repeat, if
necessary.
5. Touch the blank rectangle to
enter a value.
6. Enter a value, and touch
Done. The unit is converted.
7. Touch Clear to convert
another value.

nvi 200 and 200W series owners manual

Using the Tools

World Clock

1. Touch Tools > World Clock.


2. To change a city listed, touch
the city.
3. Select a new time zone (or
city). Touch OK when done.
4. Touch World Map to view a
map.
5. Nighttime hours are shown in
the shaded area. Touch World
Clock to view the clocks
again, or Back to exit.

nvi 200 and 200W series owners manual19

Customizing the nvi

Customizing the
nvi
1. Touch Tools > Settings.

2. Touch the setting you want to


change.
3. Touch the button next to the
setting name to change it.

Usage Modespecify how you will


be navigating to optimize routes:
Automobile, Bicycle, or Pedestrian.
Unitschange units of measure to
Kilometers or Miles.
Aboutdisplay the nvi software
version number, the unit ID number,
and the audio version number.
You need this information when
you update the system software or
purchase additional map data (see
page 30).
Restorerestore the system settings.

Changing the System


Settings
Touch Tools > Settings > System.

GPS Simulatorturn on the


simulator to turn off the GPS mode
and simulate navigation and to save
battery power.
20

nvi 200 and 200W series owners manual

Customizing the nvi

Adjusting the Display


Settings
Touch Tools > Settings > Display.
Color Modeselect Daytime for
a light background, Nighttime
for a dark background, or Auto to
automatically switch between the
two.

Changing the
Navigation Settings
Touch Tools > Settings >
Navigation.

Route Preferenceselect a
preference for calculating your route:

Brightnessadjust the backlight


brightness level. Reducing the
backlight brightness increases your
battery life.

Faster Timeto calculate routes


that are faster to drive but can be
longer in distance.
Shorter Distanceto calculate
routes that are shorter in distance
but can take more time to drive.
Off Roadto calculate point-topoint routes (without roads).
Avoidancesselect the road types
you want to avoid on your routes.

Restorerestore the original display


settings.

Restorerestore the original


navigation settings.

Screen Shotturn on Screen Shot


mode. Touch
to take a screen
shot. The picture bitmap file is saved
in the scrn folder on the nvi drive.

nvi 200 and 200W series owners manual

21

Customizing the nvi

Updating the Time


Settings

Touch Tools > Settings > Time.


Time Formatselect a 12-hour,
24-hour, or UTC time format.
Time Zoneselect a time zone or
nearby city from the list.
Daylight Savingset to On, Off ,
or Auto, if it is available.
Restorerestore the original time
settings.

Setting the Languages

Touch Tools > Settings > Language.


Voicechange the language for
voice prompts.
Textchange all on-screen text to
the selected language. Changing the
text language does not change the
language of user-entered data or map
data, such as street names.
Keyboardselect the keyboard for
your language. You can also change
the keyboard language mode from
any keyboard by touching the Mode
button.
Restorerestore the original
language settings.

22

nvi 200 and 200W series owners manual

Customizing the nvi

Changing Security
Settings

Changing the Map


Settings

Garmin Lockturn on Garmin


Lock to lock your nvi. Enter
a 4digit PIN, and set a security
location. For more information, see
page 25.

Map Detailadjust the amount of


detail shown on the map. Showing
more detail can cause the map to
redraw slower.

Touch Tools > Settings > Security.

Safe Modeturn safe mode on or


off. When your vehicle is moving,
safe mode disables all functions that
require significant operator attention
and could become a distraction while
driving.
Restorerestore the original
security settings. Note that restoring
the security settings will not clear
your Garmin Lock PIN or security
location.

Touch Tools > Settings > Map.

Map Viewselect a map


perspective.
Track Updisplay the map in
two dimensions (2D) with your
direction of travel at the top.
North Updisplay the map in
2D with North at the top.
3Ddisplay the map in three
dimensions (3D) in Track Up.

nvi 200 and 200W series owners manual

23

Customizing the nvi

Vehicletouch Change to change


the icon used to display your position
on the map. Touch the icon you
want to use, and then touch OK.
Download additional vehicle icons at
www.garmin.com/vehicles.
Map Infoview the maps and the
version of each map loaded on your
nvi. Touch a map to enable (check
mark) or disable (no check mark)
that map.
Restorerestore the original map
settings.

Changing the
Proximity Points
Settings

You must have proximity points


(such as custom POIs or a safety
camera database) loaded to adjust
the proximity points settings. See
page 31. Touch Tools > Settings >
Proximity Points.
Proximity Alertsturn the alerts
on or off when you approach custom
POIs or safety cameras.
Restorerestore the proximity
points settings.

Restoring All Settings

1. Touch Tools > Settings.


2. Touch Restore.
3. Touch Yes.

24

nvi 200 and 200W series owners manual

Appendix

Appendix
Avoiding Theft

To avoid theft, remove the unit


and mount from sight when not
in use. Remove the residue left
on the windshield by the suction
cup.
Do not keep your unit in the
glove compartment.
Register your product at
http://my.garmin.com.
Use the Garmin Lock feature.

Locking Your nvi

Garmin Lock is a theft-deterrent


system that locks your nvi. Each
time you turn on the nvi, enter the
PIN or drive to the security location.
1. Touch Tools > Settings >
Security.
2. Touch the button below
Garmin Lock.
3. Enter a 4-digit PIN and drive
to a security location.
Your security location should be a
location you return to often, such as
your home. If the nvi has satellite
signals and you are at the security
location, you do not need to enter
the PIN.

nvi 200 and 200W series owners manual

25

Appendix

NOTE: If you forget your PIN


and your security location,
you must send your nvi to
Garmin to get it unlocked.
You must also send a valid
product registration or proof of
purchase.

Calibrating the Screen


If the touch screen is not responding
properly, calibrate the touch screen.
1. Turn off the nvi.
2. Turn on the nvi and hold
the Power key to the left for
about 30 seconds until the
calibration screen appears
(white screen with Press
dot).

26

Resetting Your nvi

If your nvi stops responding, turn


the nvi off, and then turn it back on.
If this does not help, reset your nvi.
Depending on your nvi model, you
can reset your nvi one of two ways:
Press and hold the Reset button
on the bottom of the nvi for
several seconds.
Caution: Do not reset your
nvi with a ballpoint pen or
other sharp object, which can
damage the unit or the battery.
If your nvi does not have a
Reset button, slide the Power
key to the left and hold it for 8
seconds.

nvi 200 and 200W series owners manual

Appendix

Updating the Software

1. Go to www.garmin.com
/products/webupdater, and
download WebUpdater to your
computer.
2. Connect the nvi to your
computer using the mini-USB
cable.
3. Run WebUpdater, and follow
the on-screen instructions.
After confirming that you want to
perform an update, WebUpdater
automatically downloads the update
and installs it on your nvi.

Clearing User Data


Caution: This deletes all
user-entered information.
1. Hold your finger on the lowerright corner of the nvi screen
while turning on the nvi.
2. Keep your finger pressed until
the pop-up window appears.
3. Touch Yes to clear all user
data.
All original settings are restored.
Any items that you have saved are
erased.

nvi 200 and 200W series owners manual

27

Appendix

Battery Information

Charging Your nvi

To maximize the lifetime of the


battery, do not leave your nvi in
direct sunlight, and avoid prolonged
exposure to excessive heat.
The
battery icon in the corner
of the Menu page indicates the status
of the nvi battery. To increase the
accuracy of the battery gauge, fully
discharge the battery and then fully
charge it. Do not unplug the nvi
until it is totally charged.

28

Connect the vehicle power cable


to the mini-USB connector on
your nvi and to a power outlet
in your vehicle. The vehicle key
may need to be turned to ON/
ACC for the nvi to charge.
Connect an AC adapter (optional
accessory) to the nvi and a wall
outlet.
Connect your nvi to a computer
using a USB cable (optional
accessory). The computer must
be on for the nvi to charge.

nvi 200 and 200W series owners manual

Appendix

Changing the Fuse


Caution: When replacing
the fuse, do not lose any of the
small pieces and make sure
they are put back in the proper
place.
If your unit will not charge in your
vehicle, you might need to replace
the fuse located at the tip of the
vehicle adapter.

End
piece
Silver tip

1. Unscrew the
black, round
end piece,
Fuse
and remove
it.
2. Remove the
fuse (glass
and silver cylinder), and
replace it with a 3 A fast-blow
fuse.

3. Ensure that the silver tip is


placed in the black end piece.
Screw on the black end piece.

Removing the nvi


and Mount

To remove the nvi from the cradle,


hold onto the cradle and tilt the nvi
forward.
To remove the cradle from the
mount, turn the cradle to the right or
left. Apply pressure in that direction
until the cradle snaps off the mount.
To remove the suction cup mount
from the windshield, flip the lever
toward you. Pull the tab on the
suction cup toward you.

nvi 200 and 200W series owners manual

29

Appendix

Mounting on Your
Dashboard

Use the enclosed mounting disk to


mount your unit to the dashboard and
comply with certain state regulations.
Caution: The permanent
mounting adhesive is
extremely difficult to remove
after it is installed.
1. Clean and dry the dashboard
where you are placing the
disk.
2. Remove the backing from the
adhesive on the bottom of the
disk.
3. Place the disk on the
dashboard.
4. Remove the clear plastic
cover from the top of the disk.

30

5. Place the suction cup mount


on top of the disk. Flip the
lever down (toward the disk).

Additional Maps

You can purchase additional


MapSource map data from Garmin
and load the maps in your nvi
internal memory or on an optional
memory card.
To determine the versions of the
maps that are loaded on your nvi,
open the Menu page. Touch Tools >
Settings > Map > Map Info. Check
http://my.garmin.com/maps/updates
.htm to see if an update for your
map software is available. To enable
additional maps, you need your unit
ID (see page 20) and serial number
(located near the power connector).
To load maps or waypoints in your
nvi memory or on your memory
card, select the name for your nvi

nvi 200 and 200W series owners manual

Appendix

drive or memory card drive. Refer


to the MapSource Help file for more
information.

About GPS Satellite


Signals

Your nvi must acquire GPS


(Global Positioning System) satellite
signals in order to navigate. If you
are indoors, near tall buildings or
trees, or in a parking garage, your
nvi may not acquire satellites. Go
outside to an area free from tall
obstructions to use your nvi.
When your nvi has acquired
satellite signals, the signal strength
bars on the Menu page are green
. When it loses satellite
signals, the bars turn red or clear
.
For more information about GPS, go
to www.garmin.com/aboutGPS.

Extras and Optional


Accessories

For more information about optional


accessories, go to http://buy.garmin
.com or www.garmin.com/extras, or
contact your Garmin dealer.
Custom Points of Interest
Use the POI Loader to load custom
points of interest (POIs) onto your
nvi. POI databases are available
from various companies on the
Internet. Some custom databases
contain alert information for points,
such as safety cameras and school
zones.
Go to www.garmin.com/extras, and
click POI Loader to install the POI
Loader onto your computer. For
more information, refer to the POI
Loader Help file. Press F1 to open
the Help file.

nvi 200 and 200W series owners manual31

Appendix

To view your Custom POIs, touch


Where to? > Extras > Custom
POIs.
To change the proximity alert
settings, touch Tools > Settings
> Proximity Points > Proximity
Alerts.
To delete the Custom POIs from
your nvi, connect your nvi to
your computer. Open the Garmin\
poi folder in the nvi drive or the
memory card drive. Delete the file
titled poi.gpi.

Safety Cameras
Safety camera information is
available in some locations. Check
http://my.garmin.com for availability.
For these locations, the nvi includes
the locations of hundreds of safety
cameras. Your nvi alerts you when
you are approaching a safety camera
and can warn you if you are driving
too fast. The data is updated at least
weekly, so you always have access to
the most up-to-date information.
You can purchase a new region
or extend an existing subscription
at any time. Each region that you
purchase has its own expiration date.
Caution: Garmin is not
responsible for the accuracy
of, or the consequences of
using, a custom POI or safety
camera database.

32

nvi 200 and 200W series owners manual

Appendix

Garmin Travel Guide

Much like a paper travel guide,


the Garmin Travel Guide provides
detailed information about places,
such as restaurants and hotels. To
purchase an accessory, go to
http://buy.garmin.com or contact
your Garmin dealer.
To use the travel guide, insert the
memory card into your nvi. Touch
Where to? > Extras. Touch the
name of your travel guide to open it.

Contact Garmin

Contact Garmin Product Support if


you have any questions while using
your nvi. In the USA, go to
www.garmin.com/support, or contact
Garmin USA by phone at (913) 3978200 or (800) 800-1020.
In the UK, contact Garmin (Europe)
Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com
/support and click Contact Support
for in-country support information,
or contact Garmin (Europe) Ltd. by
phone at +44 (0) 870.8501241.

nvi 200 and 200W series owners manual33

Appendix

Specifications

nvi 200 Series


Physical size W H D: 3.8 2.8
0.8 in. (97 71 20 mm)
Weight: 5.2 oz. (147.42 g)
Display: 3.5" diagonal, 320 240
pixels; 64K colors; bright
QVGA TFT landscape display;
white backlight; touch screen
Case: Not waterproof (IPXO)
Operating temperature range:
32F140F (0C60C)
Charging temperature range:
32F113F (0C45C)
Data storage: Internal memory and
optional removable microSD
or SD card. Data stored
indefinitely.
Computer interface: USB 2.0 full
speed mass storage
Operating system: Garmin
34

Charge time: Approximately 4


hours
Power input: Vehicle power using
included vehicle power cable
or AC power using an optional
accessory
Usage: 5 W max.
Battery life: Up to 4 hours
Battery type: Non-user-replaceable
rechargeable lithium-ion battery
GPS receiver: High-sensitivity
Acquisition times*:
Warm: <1 sec
Cold: <38 sec
Factory Reset: <45 sec
*Average acquisition times for a
stationary receiver with a clear view
of the sky.

nvi 200 and 200W series owners manual

Appendix

nvi 200W Series


Physical size W H D: 4.8 2.9
0.8 in. (122 74 20 mm)
Weight: 6.1 oz. (172.9 g)
Display: 4.3" diagonal, 480 272
pixels; 64K colors; bright
WQVGA TFT landscape
display; white backlight; touch
screen
Case: Not waterproof (IPXO)
Operating temperature range:
32F140F (0C60C)
Charging temperature range:
32F113F (0C45C)
Data storage: Internal memory and
optional removable SD card.
Data stored indefinitely.
Computer interface: USB 2.0 full
speed mass storage
Operating system: Garmin
Charge time: Approximately 4
hours

Power input: Vehicle power using


included vehicle power cable
or AC power using an optional
accessory
Usage: 5 W max.
Battery life: Up to 4 hours
Battery type: Non-user-replaceable
rechargeable lithium-ion battery
GPS receiver: High-sensitivity
Acquisition times*:
Warm: <1 sec
Cold: <38 sec
Factory Reset: <45 sec
*Average acquisition times for a
stationary receiver with a clear view
of the sky.

nvi 200 and 200W series owners manual35

Appendix

Declaration of
Conformity

Hereby, Garmin declares that this


nvi product is in compliance with
the essential requirements and other
relevant provisions of Directive
1999/5/EC. To view the full
Declaration of Conformity, go to the
Web site for your Garmin product at
www.garmin.com.

Software License
Agreement

BY USING THE nvi, YOU AGREE


TO BE BOUND BY THE TERMS AND
CONDITIONS OF THE FOLLOWING
SOFTWARE LICENSE AGREEMENT.
PLEASE READ THIS AGREEMENT
CAREFULLY.
Garmin grants you a limited license to use
the software embedded in this device (the
Software) in binary executable form in
the normal operation of the product. Title,
ownership rights, and intellectual property
rights in and to the Software remain in

36

Garmin.
You acknowledge that the Software is the
property of Garmin and is protected under the
United States of America copyright laws and
international copyright treaties. You further
acknowledge that the structure, organization,
and code of the Software are valuable trade
secrets of Garmin and that the Software in
source code form remains a valuable trade
secret of Garmin. You agree not to decompile,
disassemble, modify, reverse assemble,
reverse engineer, or reduce to human readable
form the Software or any part thereof or create
any derivative works based on the Software.
You agree not to export or re-export the
Software to any country in violation of the
export control laws of the United States of
America.

nvi 200 and 200W series owners manual

Appendix

Troubleshooting
Problem/Question

Solution/Answer

My nvi never gets


satellite signals.

Take your nvi out of parking garages and away


from tall buildings and trees. Remain stationary for
several minutes.

The suction cup


will not stay on my
windshield.

Clean the suction cup and windshield with rubbing


alcohol. Dry with a clean, dry cloth. Mount the
suction cup as described on page 2.

My nvi does not


charge in my vehicle.

Check the fuse in the vehicle power cable (see page


29).
Ensure the vehicle is turned on and is supplying
power to the power outlet.
Your nvi can only charge between 32F and 140F
(0C and 60C). If the nvi is placed in direct sunlight
or in a hot environment, it cannot charge.

My battery does not


stay charged for very
long.

To maximize the time between charges, turn down


the backlight. Touch Tools > Settings > Display >
Brightness.

How do I clear all my


user data?

Hold your finger on the lowerright corner of the


nvi screen while it is turning on. Keep your finger
pressed until the message appears. Touch Yes to
clear all user data.

nvi 200 and 200W series owners manual37

Appendix
Problem/Question

Solution/Answer

My battery gauge
does not seem
accurate.

Allow the unit to fully discharge, and fully charge it


(without interrupting the charge cycle).

The touch screen is


not responding to my
touches.

Calibrate the touch screen as described on page 26.

How do I know my
nvi is in USB mass
storage mode?

When your nvi is in USB mass storage mode, a


picture of a nvi connected to a computer is shown.
Also, you should see two new removable disk drives
listed in My Computer.

My computer never
senses that the nvi
is connected.

1. Unplug the USB cable from your computer.


2. Turn off the nvi.
3. Plug the USB cable into a USB port on
your computer and into your nvi. The nvi
automatically turns on and goes into USB mass
storage mode. Ensure your nvi is connected to
a USB port and not a USB hub.

I cannot see any new


removable drives in
my list of drives.

If you have several network drives mapped on your


computer, Windows can have trouble assigning
drive letters to your nvi drives. See your operating
system Help file to learn how to map or assign drive
letters.

38

nvi 200 and 200W series owners manual

Appendix
Problem/Question

Solution/Answer

How can I find


restaurants near the
hotel I will be staying
at in the future?

1. Touch Where To? > Near > A Different City


(and enter your vacation destination).
2. Find the hotel, and touch Go!.
3. Touch Menu > Where To? > Near > My
Destination.
4. Search for a restaurant. Restaurants nearest
your hotel are listed first.

nvi 200 and 200W series owners manual39

Index

Index
Symbols

2-D, 3-D map view 23

accessories 31, 32
additional maps 30
addresses 6
alarm clock 33
alerts
safety camera 32
anti-theft feature 23, 25
audio version 20
avoiding
road types 21
theft 25

background color 21
battery 28, 37
status 3
battery information 28
bicycle navigation 20
brightness 21
40

browsing the map 10

calculator 17
caring for your nvi iv
charging your nvi 28,
37
clock for the world 19
computer connection 14
configuring 3
converting
currency 17
units 18
coordinates 10
currency, converting 17
current location, save 9
customizing the
nvi 2024
custom POIs 32

dashboard disk 30
daylight savings 22
Declaration of
Conformity 36

deleting
all user data 27
character 8
custom POIs 32
Favorites 9
files 15
recent finds list 8
detail maps 24
detour 5
diacritical characters 8
display settings 21
driving directions 13

extras 3132

Favorites 9
files 1415
deleting 15
supported types 14
transferring 15
finding places 4
by address 6
by coordinates 10

nvi 200 and 200W series owners manual

Index
by name 7
near another
location 11
recent selections 8
saved places
(Favorites) 9
fuse, changing 29

Garmin Lock 23, 25


Garmin Travel Guide 33
geocaching 10
Go! page options 6
go home 7
GPS
about GPS 3, 31
off/on 20

Help 16
home
setting a location 7

JPEG image files 14

keyboard 8
language mode 8, 22
kilometers 20

language settings 22
lithium-ion battery 28,
34, 35
locking
screen 5
the nvi 25

map
adding 30
browsing 10
detail level 23
enabling detail
maps 24
Map Info button 24
settings 23
updating 30
version 24
viewing 23

zooming 10
MapSource 14, 30
max speed, reset 13
measurements,
converting 18
memory card 1, 14
Menu page 3
miles 20
mounting
on dashboard 30
on windshield 37
removing from
mount 29
mute audio 5
myGarmin i

navigation 12
mode 20
settings 21
next turn 13
nvi
case 1
charging 28
cleaning iv

nvi 200 and 200W series owners manual41

Index
mounting 2, 30
protecting iv
resetting 26

off road, routing 11, 21


on-screen keyboard 8
on-unit Help 16
output, audio 5

pedestrian navigation
mode 11, 20
PIN
Garmin Lock 25
points of interest 7
custom 31
POI loader 14
position icon 24
proximity alerts 24
proximity points
alerts 24
settings 24

42

recently-found
locations 8
registering 25
removing the mount 29
resetting
the max speed 13
the trip data 13
your nvi 26
routes
adding a stop 5
mode 20
off road 21
preferences 21
simulating 20
stopping 5

safe mode 23
safety camera
database 32
satellite signals 31
saving
places you find 9
your current

location 9, 10
school zone database 31
screen
brightness 21
lock 5
screen shots 21
SD card 1
search area 11
security
settings 23
settings 2024
restoring 24
setting your location 10
simulating a route 20
software
license agreement 36
updating 27
version 20
specifications
200 series 34
200W series 35
storing the nvi iv
supported file types 14
system settings 20

nvi 200 and 200W series owners manual

Index

text language 22
time settings 22
time zone 22
tools 1619
touch screen
calibrating 26, 38
cleaning iv
settings 21
Track Up 23
transferring files 15
trip computer 13
trip data, reset 13
troubleshooting 37
turn-by-turn
directions 13
turn list 13

USB 38
eject 15
mass-storage
mode 14
user data, delete 27

vehicle icon 24
via point, adding 5
voice language 22

walking route 11, 20


WebUpdater 27
Where to? 6
world clock 19

zoom 10

unit ID 20
units, convert 18
updating
maps 30
software 26
usage mode 20
nvi 200 and 200W series owners manual43

For the latest free software updates (excluding map data)


throughout the life of your Garmin products, visit the Garmin
Web site at www.garmin.com.

2008 Garmin Ltd. or its subsidiaries


Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire,
SO40 9RB UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan
www.garmin.com
October 2008

190-00752-10 Rev. A

Printed in Taiwan

You might also like