Scribd
Upload
27 views

DSC Powerseries QuickReferenceGuide

This security system quick reference guide provides instructions for common tasks like arming the system, disarming it, setting the time and date, and changing settings. To arm the entire system, close all doors and windows, press and hold the Away button for 2 seconds, and exit before the delay expires. To disarm the system when returning, enter your code after the warning tone. The guide also explains how to arm just the perimeter, bypass zones, sound alarms manually, and more.

Uploaded by

andrei
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

DSC Powerseries QuickReferenceGuide

This security system quick reference guide provides instructions for common tasks like arming the system, disarming it, setting the time and date, and changing settings. To arm the entire system, close all doors and windows, press and hold the Away button for 2 seconds, and exit before the delay expires. To disarm the system when returning, enter your code after the warning tone. The guide also explains how to arm just the perimeter, bypass zones, sound alarms manually, and more.

Uploaded by

andrei
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SECURITY SYSTEM QUICK REFERENCE GUIDE

TO ARM ENTIRE SYSTEM BOTH INTERIOR AND PERIMETER


Close all windows and doors (the green Ready light will turn ON)
Press and hold
(Away) for 2 seconds (the keypad will beep rapidly
5 times and the red Armed light will turn ON)
Exit premises before the delay time expires
TO DISARM SYSTEM WHEN YOU RETURN
When you enter through the door, the keypad will emit a steady warning tone
Enter your 4-digit Master Code or User Code (the armed light will turn OFF)
If you make an error, press
and enter the 4-digit code again
TO ARM PERIMETER OF BUILDING AND STILL MOVE FREELY INSIDE
Press and hold
(Stay) for 2 seconds
TO ARM SYSTEM WITH DOOR OR WINDOW OPEN
Press
while disarmed
The Bypass light will flash
Enter the 2-digit zone number to be bypassed
To exit the Bypass function press
TO SILENCE ALARM
Enter your 4-digit Master Code or User Code
WHEN TROUBLE LIGHT COMES ON
Press
Some keypads will describe the Trouble (full-message keypads); others will
only identify the Trouble number (fixed-message and LED keypads)
If Trouble number 8 is lit, the time and date needs to be reset (see reverse)
For all other trouble conditions, contact your security provider

www.dsc.com
1-888-888-7838

SECURITY SYSTEM QUICK REFERENCE GUIDE


TO SET TIME AND DATE
Press
and enter the 4-digit Master Code
1 long beep indicates an error, press
and enter the Master Code again
After 4 short beeps, press
then 10 digits, 2 each for the hour, minute,
month, day and year (HH:MM MM/DD/YY)
- Use a 24-hour clock (e.g. 8:30 pm = 20:30 )
- Use 2 digits each to indicate the month and day (e.g. March 8 = 03 08)
- Only enter the last 2 digits of any given year (e.g. 2007 = 07)
TO ENABLE DOOR CHIME FEATURE
Press and hold
(Door Chime) for 2 seconds
3 beeps = ON; 1 long beep = OFF
CHANGING KEYPAD BUZZER TONE
If using a PK5500 keypad, press
and enter the 4-digit Master
Code then proceed with the following:
- Scroll to the phrase Buzzer Control and press
If using an LED or fixed-message keypad, press
and enter the
4-digit Master Code then proceed with the following:
- Press and hold
(Left Arrow)
- The tone will change
- When the desired tone is identified, release
(Left Arrow)
TO SOUND AN ALARM MANUALLY
Press and hold
(Fire) or
for 2 seconds

(Emergency)

or (Panic)

29007370 R001

FOR MORE INFORMATION


Ask your security company for a copy of the operating instructions DVD
Visit www.dsc.com to download the complete user manual

www.dsc.com
1-888-888-7838

You might also like