Scribd
Upload
766 views2 pages

Biuret Test For Proteins

The Biuret test is used to detect the presence of proteins. It involves adding Biuret reagent or alternatives like Fehling's solutions, sodium hydroxide, and copper (II) sulfate to a liquid food sample. A color change from blue to violet or pink indicates the presence of proteins or peptides. No color change signifies that no protein is present. The test can also be used quantitatively to measure the concentration of total protein.

Uploaded by

Sajjad Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
766 views2 pages

Biuret Test For Proteins

The Biuret test is used to detect the presence of proteins. It involves adding Biuret reagent or alternatives like Fehling's solutions, sodium hydroxide, and copper (II) sulfate to a liquid food sample. A color change from blue to violet or pink indicates the presence of proteins or peptides. No color change signifies that no protein is present. The test can also be used quantitatively to measure the concentration of total protein.

Uploaded by

Sajjad Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Biuret Test for Proteins

The Biuret Test is often used to determine the presence of peptide bonds in protein. At
this level you will be testing for the presence of protein in foods.
The test may also be extended to quantitatively measure the concentration of total
protein.

Instead of the Biuret Reagent, the following may be used:


Fehlings Solutions A and B
Sodium hydroxide and copper (II) sulphate solutions

Procedure
1. Add 2 cm3 of the liquid food sample* to a clean, dry test tube
2. Add 2 cm3 of Biuret Reagent. Alternatively:
3. Use sodium hydroxide solution and copper sulphate solutioninstead. Add 1 cm3
of sodium hydroxide solution (40% or bench solution) and 1% copper (II) sulphate
solution dropwise drop by drop - to the food sample
4. Use Fehling's A and B solutions instead. Fehling's A and B should be freshly
prepared. Fehlings A is copper (II) solution and Fehling's B is a mixture of sodium
potassium tartrate and sodium hydroxide solution. 1cm3 of each solution A and B
should be added to the food sample.
5. Repeat steps 1 and 2 with de-ionized water to prepare a negative controland
with albumin (egg white) to prepare a postive control.
6. Shake well and allow the mixture to stand for 5 minutes.
7. Observe any color change.
* Prepare liquid samples from solid foods. Crush the solid food, add a little de-ionized water
and decant the liquid. This liquid should be used for the food test. The quantity of food
crushed and water used depends on the number of tests to be conducted.

Observations and Interpretation

TEST
POSITIVE

NEGATIVE

OBSERVATION
The solution turns from blue to
violet( purple)
The solution turns from blue to
pink
No change /The solution
remains blue

INFERENCE
Proteins are present
Peptides are present ( Peptides or peptones are short
chains of amino acid residues)
No protein is present

You might also like