Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Window Reset Proceedure

    Uploaded by

    Vlada Stamenovic
    The document provides instructions for resetting the power window on a BMW. It involves erasing the initialization by opening the window fully and pressing the "Open" button 4 times within 10 seconds. Reinitialization then requires opening the window fully and holding the "Close" button as it reaches the top, holding for 2 additional seconds, then repeating the process on the other side. The reset is necessary after malfunctions, replacing parts, or work done on the window mechanism.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Window Reset Proceedure

    Uploaded by

    Vlada Stamenovic
    29 views1 page
    The document provides instructions for resetting the power window on a BMW. It involves erasing the initialization by opening the window fully and pressing the "Open" button 4 times within 10 seconds. Reinitialization then requires opening the window fully and holding the "Close" button as it reaches the top, holding for 2 additional seconds, then repeating the process on the other side. The reset is necessary after malfunctions, replacing parts, or work done on the window mechanism.

    Original Description:

    For BMW series 3 when windows works by their own

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for resetting the power window on a BMW. It involves erasing the initialization by opening the window fully and pressing the "Open" button 4 times within 10 seconds. Reinitialization then requires opening the window fully and holding the "Close" button as it reaches the top, holding for 2 additional seconds, then repeating the process on the other side. The reset is necessary after malfunctions, replacing parts, or work done on the window mechanism.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    29 views1 page

    Window Reset Proceedure

    Uploaded by

    Vlada Stamenovic
    The document provides instructions for resetting the power window on a BMW. It involves erasing the initialization by opening the window fully and pressing the "Open" button 4 times within 10 seconds. Reinitialization then requires opening the window fully and holding the "Close" button as it reaches the top, holding for 2 additional seconds, then repeating the process on the other side. The reset is necessary after malfunctions, replacing parts, or work done on the window mechanism.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 1

    The Official Reset Proceedure

    Courtesy of a BMW tech on another forum, ...with thanks.


    Initialization is performed on the power window switch of the relevant door.
    Requirements for correct initialization:
    Initialization with engine running
    Convertible top, doors and windows closed
    Initialization comprises:
    Erasure of initialization
    Reinitialization
    An initialization must be performed:
    In the event of malfunctions, e.g. no one-touch control function, no opening or if available
    no comfort function is possible
    After the power window drive has been replaced
    After work is carried out on the power window mechanism
    After a power supply interruption, e.g. disconnection of the battery or disconnection of the
    power supply to the door
    After the door window glass has been removed and installed or replaced
    After adjustment work on the door window glass
    After adjustment work on the convertible top
    After replacement of seals
    Erasure of initialization:
    Open door window glass fully
    Operate power window switch in "Open" position four times within 10 seconds
    This erases initialization of the power window, anti-trapping protection and toll function are
    inactive.
    Check whether one-touch control (toll) function is inactive, otherwise repeat procedure.
    Reinitialization:
    Avoid a break between the two steps!
    Open door window glass fully
    Operate and hold power window switch in "Close" position (second switch stage)
    Once the upper end position has been reached, hold power window switch in "Close"
    position for approx. 2 seconds longer
    Open door window glass fully
    Operate and hold power window switch in "Close" position (second switch stage)
    Once the upper end position has been reached, hold power window switch in "Close"
    position for approx. 2 seconds longer

    You might also like