Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Check For Allowable Drift For Steel Frames:: David H. Lau and Associates, Inc

    Uploaded by

    Noel Guades
    This document is a calculation sheet for allowable drift for steel frames according to ASCE 07-05 Section 12.8.6. It provides the storey height, computed storey drift under design earthquake force (Δi), allowable storey drift (Δa), and whether the computed drift is less than the allowable for two sample frames. The drift calculations are amplified by a factor for the expected earthquake intensity level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Check For Allowable Drift For Steel Frames:: David H. Lau and Associates, Inc

    Uploaded by

    Noel Guades
    35 views1 page
    This document is a calculation sheet for allowable drift for steel frames according to ASCE 07-05 Section 12.8.6. It provides the storey height, computed storey drift under design earthquake force (Δi), allowable storey drift (Δa), and whether the computed drift is less than the allowable for two sample frames. The drift calculations are amplified by a factor for the expected earthquake intensity level.

    Original Description:

    adfadf

    Original Title

    adfadfasd

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a calculation sheet for allowable drift for steel frames according to ASCE 07-05 Section 12.8.6. It provides the storey height, computed storey drift under design earthquake force (Δi), allowable storey drift (Δa), and whether the computed drift is less than the allowable for two sample frames. The drift calculations are amplified by a factor for the expected earthquake intensity level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    Check For Allowable Drift For Steel Frames:: David H. Lau and Associates, Inc

    Uploaded by

    Noel Guades
    This document is a calculation sheet for allowable drift for steel frames according to ASCE 07-05 Section 12.8.6. It provides the storey height, computed storey drift under design earthquake force (Δi), allowable storey drift (Δa), and whether the computed drift is less than the allowable for two sample frames. The drift calculations are amplified by a factor for the expected earthquake intensity level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    JOB_________________________

    SHEET NO._________OF________
    CALCULATED BY______________
    DATE______________

    DAVID H. LAU AND ASSOCIATES, INC.


    12467 West Washington Boulevard
    Los Angeles, CA 90066-5511
    email: [email protected]

    CHECK FOR ALLOWABLE DRIFT FOR STEEL FRAMES:


    (ASCE 07-05 Section 12.8.6)

    WHERE;

    i = Storey Drift Computed under Strength-Level Design Earthquake Force


    a = Allowable Storey Drift (0.025h)
    h = Storey Height (FT.)

    FRAME : 1
    STOREY
    Storey 1

    STOREY
    HEIGTH
    (FT.)
    17.00

    Cd

    AMPLIFIED

    0.31

    1.24

    Cd

    AMPLIFIED

    0.20

    <

    a = 0.025h
    5.10

    FRAME : 2
    STOREY
    Storey 1

    DHL/SM/NRG

    STOREY
    HEIGTH
    (FT.)
    11.75

    0.8

    <

    a = 0.025h
    3.53

    REVISED 09-06-08

    You might also like