Scribd
Upload
84 views1 page

Erabond Concrete: Era Polymers Have Formulated A New, Fast Cure Primer For Concrete Called Erabond Concrete

Erabond Concrete is a new, fast-curing solvent-based primer from Era Polymers for concrete surfaces that reduces the time primed surfaces are exposed to contamination before being coated. It has advantages over water-based epoxy primers such as being single component, drying within 1.5-2 hours at 25°C, having low viscosity for good penetration, and providing excellent bonding to concrete and sprayed elastomer top coats. The primer can also be mixed with sand and troweled to fill small surface defects before top coating.

Uploaded by

qwepool
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views1 page

Erabond Concrete: Era Polymers Have Formulated A New, Fast Cure Primer For Concrete Called Erabond Concrete

Erabond Concrete is a new, fast-curing solvent-based primer from Era Polymers for concrete surfaces that reduces the time primed surfaces are exposed to contamination before being coated. It has advantages over water-based epoxy primers such as being single component, drying within 1.5-2 hours at 25°C, having low viscosity for good penetration, and providing excellent bonding to concrete and sprayed elastomer top coats. The primer can also be mixed with sand and troweled to fill small surface defects before top coating.

Uploaded by

qwepool
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Erabond Concrete

SOLVENT BASED PRIMER FOR CONCRETE

Era Polymers have formulated a new, fast cure primer for concrete called
Erabond Concrete.
Erabond Concrete is a fast drying product that reduces the time the primed
surface is exposed. This decreases the risk of contamination settling on the
surface and saves spray coating applicators considerable time and money.
Erabond Concrete has the following advantages over traditional water based
epoxy technology:
o Single component - no need to mix two components together at the
correct mixing ratio.
o Fast drying - typically 1.5 - 2 hours at 25C.
o Low viscosity - aids penetration of the concrete.
o Excellent bond strength to the concrete and spray elastomer
(polyurethane/polyurea) top coats.
o Dries to hard film - resists outgassing from the concrete which mitigates
against blister formation in the top coat.
o Economical - attractive unit pricing coupled with coverage rate of circa
7m/Kg.
Handy tip - for filling small surface defects in the concrete slab, Erabond
Concrete can be mixed with sand and then trowelled in place prior to over
coating with spray elastomer.
For more information on Erabond Concrete, please contact Era Polymers
on +61 (0) 2 9666 3788 where one of our representatives will be able to assist
you. Alternatively, email [email protected]

www.erapol.com.au
June 2011

Era Polymers Pty Ltd


ABN 14 003 055 936

25-27 Green Street


Banksmeadow
NSW 2019, Australia

P
F
E

+61 2 9666 3788


+61 2 9666 4805
[email protected]

www.erapol.com.au

You might also like