This document provides information on an on/off diaphragm valve type VM100 for water supply programs. The valve has two positions - open and closed - and is designed for automatic remote control. It is intended for use with drinking water temperatures up to 60°C at nominal pressures of PN16 and PN25. The valve housing is made of cast iron or ductile iron with internal parts made of stainless steel, and is mainly used for managing sand filters and filling water reservoirs.
This document provides information on an on/off diaphragm valve type VM100 for water supply programs. The valve has two positions - open and closed - and is designed for automatic remote control. It is intended for use with drinking water temperatures up to 60°C at nominal pressures of PN16 and PN25. The valve housing is made of cast iron or ductile iron with internal parts made of stainless steel, and is mainly used for managing sand filters and filling water reservoirs.
This document provides information on an on/off diaphragm valve type VM100 for water supply programs. The valve has two positions - open and closed - and is designed for automatic remote control. It is intended for use with drinking water temperatures up to 60°C at nominal pressures of PN16 and PN25. The valve housing is made of cast iron or ductile iron with internal parts made of stainless steel, and is mainly used for managing sand filters and filling water reservoirs.
This document provides information on an on/off diaphragm valve type VM100 for water supply programs. The valve has two positions - open and closed - and is designed for automatic remote control. It is intended for use with drinking water temperatures up to 60°C at nominal pressures of PN16 and PN25. The valve housing is made of cast iron or ductile iron with internal parts made of stainless steel, and is mainly used for managing sand filters and filling water reservoirs.
designed for automatic remote control. The valve has only two positions - open and closed. Area of ? application: The valve is designed to be used with drinking water temperatures up to 60C. We produce them for nominal pressure PN16 and PN25. This valve is mainly used for the management of the sand filter, automatic filling of water reservoirs and etc. materials: The valve housing is made ? of cast iron or ductile iron. The interior of the valve housing is epoxy protected. Diameter DN [mm] 40 50 65 80 100 125 150 200 250 300
1.4301, the disc (plug unit) is made ? of PVC, and diphragm is made of PTFE. Valve control is via a solenoid pilot valve R1/4" 24V AC supply voltage. Solenoid valve housing is made ? of brass and the inner parts of stainless steel.
