Festo VPPM Fast Switching Solenoids

Proportional pressure regulators and valves VPPM,
VPPE, MPPE, MPPES, MPYE and the new VPPM-MPA

For correct pressure and precise regulation
Precise, infinite regulation

of pressure and flow
Info 241
Reliable pressure and flow control
Applying pressure correctly plus easy installation and precise regulation

Fast dynamic response, high repetition accuracy, short switching times, linear
characteristics and stable regulation these features can significantly improve
product quality by precise adjustment and control of the process variables. These
proportional pressure regulators provide infinite adjustment of pressure and
thereby the force or flow, enabling the user to preset pressures, piston speeds
and rotational speeds electrically.
Regulation at the press of a button
sturdy with 3 presets
variable via fieldbus
VPPM the new dimension

in proportional pressure regulators.
The right parameters for each application simply choose the correct regulator characteristic from 3 presets at
the press of a button. Specialists are
no longer required. Reliable regulation due to two-stage control circuit
with multi-sensor control.
Multi-sensor control
Integrated sensors for optimum
regulation results and behaviour.
Temperature-compensated, which
means no pressure drifting during
temperature changes.
Pure individuality
Our modules for the VPPM are precisely adjusted to your requirements
for electronic, pneumatic and
mechanical systems with maximum
versatility.
Diagnostics
The VPPM reports the pressure
reached as an electrical signal. It can
also diagnose a specified value that
cannot be reached. Almost all values
can be remotely controlled and monitored via CPX.
Versatility
Inline or flanged version, current controlled, voltage controlled, connection
to fieldbus/Ethernet via CPX terminal.
From basic performance to high-tech
product something completely new.
Internet: www.festo.com/catalogue/...
Info 241 Subject to change 2008/07
Main application
Can be put
p to universal use. Whether
it is accuracy or speed that is required
at the press of a button, or processes
where force and pressure must be
regulated precisely and flexibly,
reliable regulation behaviour
guarantees optimum results.
Advantages for commissioning and

maintenance
Festo plug & work: no adjustment
of the control circuit required
No need to store special
attachments
Immediate commissioning
Shorter retooling times
Remote control regulation
behaviour (presets rapid,
universal and precise)
Can be adjusted to the application
individually via presets
Choice of several pressure ranges
Process-optimised cylinder speed
Flexible, adjustable flow rates
Special adaptation possible
Only from Festo reliable regulation

with multi-sensor control
fast
LED or LCD versions of proportional

pressure regulators
1 Connector plug
M12, 8-pin
2 Status LEDs
Power/Error
3 3 preset LEDs
fast/universal/precise
4 3 pushbuttons for simple
operation (choice of presets)
5 Display of current pressure
6 Presets can be selected via
buttons or digital inputs
7 Adjustable pressure range
8 Different switch modes for switch
output (diagnostics function)
9 Choice of units (bar, kPa or psi)
aJ Bar display for identifying
dynamic processes
universal
precise
Without multi-sensor control

generally causes overshooting.
2008/07 Subject to change Info 241
VPPM-MPA on CPX/MPA
proportional technology in threefold linking
Versatile integration into

automation systems
The MPA valve terminal with fieldbus
connection communicates in many
different languages and is able to
communicate with the fieldbus
systems and automation systems of
leading manufacturers.
Faster configuration using CPX macro

Systematically more reliable and
quicker planning and configuration
with CPX modules the CPX macro
library for the electrical CAE software
Eplan.
High flexibility due to individual

pressure zones
New technologies and innovative
products enable many possibilities.
The pressure control valve integrated
in a valve terminal offers remote controlled pressure zone regulation and
therefore more flexibilityy in manyy prop
cesses. For example, a proportional
control valve enables several static
pressures to be set with low air
consumption and by multiplexing.
Compact vision system

SBOx
Handheld device
Simple service and commissioning

The small, convenient handheld CPXMMI facilitates data requisitions,
configuration and diagnostic
functions for CPX/MPA on-site in
plain text, without programming.
I/O modules
digital/analogue
Technology module
Front End Control
Fieldbus node
End plate
Manual override
Sub-base valve
Manual pressure regulator

with manometer
End plate
Integrated
pressure sensor
MPA2: manifold block

fitted with 2 valves
Electric
module
Supply plate with flat plate
silencer
Integrated VPPM proportional

pressure regulator
Separating
seal
MPA1: Manifold block

fitted with 4 valves
Identification plate
Manifold
block
Push-in fitting
Pneumatic interface
Extremely adaptable connection

technology
Better performance
thanks to technology modules
CPX-FEC provides a programmable
valve terminal remote controller on
the fieldbus or Ethernet as a preprocessing unit for decentralised,
autonomous subsystems. The CPX-CPI
interface permits centralised and
decentralised pneumatic/electrical
systems side-by-side leading to

shorter cycle times and lower wiring
costs.
Easy integration of the latest SBOx
vision system in IP65 on CPX/MPA
simpler I/O operation, on CPI interface
or via Ethernet.
For flexible and innovative quality
assurance.
4xM12
metal
8xM12
metal
M12
5-pin
M8
3-pin
Sub-D
Harax
M12
8-pin
Cage
M8
Clamp 4-pin
M12
5-pin
metal
thread
Innovation thanks to function

integration
The serial linking within the MPA
makes this possible:
VPPM-MPA pressure control valve
Pressure ranges 0.02 2 bar/
0.06 6 bar/0.1 10 bar
flow up to 1400 l/min
3 presets can be accessed
programmable switching points
pressure range can be set
temperature compensation
highly accurate cascade regulation
thanks to multi-sensor technology
-V- New
Proportional pressure regulators VPPM

General information
VPPM
Control elements
Plug socket with cable
Venting at both ends
Display
LED indicators
Manifold block
Sub-base valve
Assembly
repositionable by 180
In-line valve
H-rail mounting
Compressed air supply at both ends
Working lines
Innovative
(cascade control)
Diagnostics
Choice of regulation characteristics
Temperature compensated
High dynamic response
High repetition accuracy
Modular product system
Versatile
Individual valves (in-line valve)
Manifold valves (sub-base/flange
valve)
Various user interfaces
LED indicators
LCD display
Adjustment/selection buttons
A choice of valves with different
pressure ranges
Pressure range can be modified on
the valve
Choice of different setpoint
specifications
Current input
Voltage input
Reliable
Integrated pressure sensor
with independent output
Open circuit monitoring
Pressure is maintained if the
controller fails
Easy to mount
Manifold block
H-rail mounting
Individually via mounting bracket
QS fittings
-V- New

General information
VPPM on the valve terminal MPA
Serial data
24V
Innovative
Diagnostics via bus
Choice of regulation characteristics
High dynamic response
2 accuracy levels
Pressure zone regulation
Multiplexing
Versatile
For all common protocols

As an individual pressure regulator
As a pressure zone regulator
Choice of 3 valves with different
pressure ranges
3 pressure ranges (presets) can be
set via the bus
Internal or external compressed air
supply possible
Reliable
Long service life
LED display for the operating status
Pressure is maintained if the supply
voltage fails
Fast troubleshooting thanks to LEDs
on the valves and diagnostics via
fieldbus
Ease of servicing through
replaceable valves
Easy to mount
Simple replacement of the valves
Tested units
Easy extension of the valve terminal
-V- New

General information
Layout of a control circuit
Comparator
Closed-loop controller (integrated electronics)
(Valve output and all

downstream components)
Disturbance z
(e.g. leakage)
System deviation e
(Valve piston)
Reference
variable w
(setpoint
value)
Closed-loop
control element
Final control
element
Feedback signal r
Layout
The figure shows a closed-loop control
circuit. The reference variable w
(setpoint value, e.g. 5 volts or 8 mA)
initially acts on a comparator. The
measuring device sends the controlled
variable x value (actual value,
e.g. 3 bar) to the comparator as a
feedback signal r. The closed-loop
control element detects the system
Controlled
system
Controlled variable
x (pressure)
Measuring
device
deviation e and actuates the final

control element. The output of the
final control element acts on the controlled system. The closed-loop control
element thus attempts to compensate
for the difference between the reference variable w and the controlled
variable x by using the final control
element.
Method of operation
This process runs continuously so
changes in the reference variable are
always detected. However, a system
deviation will also appear if the
reference variable is constant but the
controlled variable changes. This
happens when the flow through the
valve changes in response to a
switching action, a cylinder movement
or a change in load. The disturbance

variable z will also cause a system
deviation. An example of this is when
the pressure drops in the air supply.
The disturbance variable z acts on the
controlled variable x unintentionally.
In all cases, the regulator attempts to
readjust the controlled variable x to
the reference variable w.
Multi-sensor control (cascade control) of the VPPM
Setpoint
value
Working
pressure
regulator
Diaphragm
pressure
regulator
Pilot solenoid
coils
Pilot control
stage
Main stage
Working
volume
Sensor 1
Actual
value
Cascade control
Unlike conventional direct-acting
regulators, with multi-sensor control
several control circuits are nested inside each other. The overall controlled
Sensor 2
system is divided into smaller subcontrolled circuits that are easier to

control for the specific task.
Control precision
Multi-sensor control significantly improves control precision and dynamic
response in comparison with singleacting regulators.
-V- New

General information
Terms related to the proportional pressure regulator
Hysteresis
There is always a linear relationship
within a certain tolerance between the
setpoint value entered and the pressure output. Nevertheless it makes a
difference whether the setpoint value
is entered as rising or falling. The
difference between the maximum
deviations is referred to as hysteresis.
Response sensitivity
3.61 bar
3.60 bar
A perfectly linear progression of the

control characteristic of the output
pressure is theoretical. The maximum
percentage deviation from this theoretical control characteristic is referred
to as the linearity error. The percentage value refers to the maximum
output pressure (full scale).
Repetition accuracy (reproducibility)

The response sensitivity of the device
determines how sensitively one can
change, i.e. adjust, a pressure.
The smallest setpoint value difference
that results in a change in the output
pressure is referred to as the response
sensitivity. In this case, 0.01 bar.
Zero offset
The repetition accuracy is the margin

within which the fluid output variables are scattered when the same
electrical input signal coming from
the same direction is repeatedly
adjusted. The repetition accuracy is
expressed as a percentage of the
maximum fluid output signal.
Pressure range adaptation
10
9
8
7
6
5
4
3
2
1
0
Linearity error
1 2 3 4 5 6 7 8 9 10
If, for example, a VPPM cannot be

vented for safety reasons, the minimum pressure can be increased from
the zero point. The smallest setpoint
value is then assigned an output
pressure of 5 bar, for example, and
the largest setpoint value an output
pressure of 10 bar. Zero suppression
is automatically switched off if zero
offsetting is used.
In the delivery condition, 100% setpoint value equals 100% fluid output
signal. Pressure range adaptation or
adjustment enables the fluid output
variable to be matched to the setpoint
value.
Zero point suppression

In practice there exists the possibility
of residual voltage or residual current
at the setpoint input of the VPPM via
the setpoint generator.
Zero point suppression is used so that
the valve is reliably vented at a
setpoint value of zero.
x mbar
0.1 V
3.6-4.12 mA
-V- New

Product range overview
Function
Pressure
regulators
Version
Constructional
design
Pneumatic
connection
1, 2, 3
Page/
Internet
Nominal
diameter
pressurise/
exhaust
Pressure
regulation
g
range
Setpoint value input

Voltage type
Current type
Digital
[mm]
[bar]
0 10 V
4 20 mA
6/4.5
0.02 2
0.06 6
0.1 10
0.02 2
0.06 6
0.1 10
With LED
Pilot actuated Gx
diaphragm
valve
Sub-base
6/4.5
15
With LCD
Pilot actuated Gx
diaphragm
valve
Sub-base
With LED for valve terminal MPA

Pilot actuated Manifold
diaphragm
block MPA
valve
10
6/4.5
6/4.5
6/4.5
0.02 2
0.06 6
0.1 10
0.02 2
0.06 6
0.1 10
0.02 2
0.06 6
0.1 10
15
15
-V- New

Peripherals overview
Individual valve
Accessories
1
2
3
4
5
6
7
8
Brief description
Page/Internet
Plug socket with cable, angled

NEBU-M12W8-
Plug socket with cable, straight
SIM-M12-8GD-
Proportional pressure regulator
VPPM
VPPM
Push-in fitting
QS
Silencer
27
27
Operator unit with LED
15
Operator unit with LCD
15
For connecting compressed air tubing with standard outside diameter
qs
For fitting on exhaust ports
Mounting bracket
VAME-P1-A
H-rail mounting
VAME-P1-T
For attaching the valve
24
For mounting on a H-rail
25
11
-V- New

Valve manifold
4
3
3
9
5
7
5
6
6
8
5
Accessories
1
2
3
4
5
6
7
8
9
12
Brief description
Page/Internet

NEBU-M12W8-
SIM-M12-8GD-
VPPM
VPPM
Blanking plug
B
Push-in fitting
QS
Manifold block
VABM
Silencer
27
27
Operator unit with LED
15
Operator unit with LCD
15
For connecting compressed air tubing with standard outside diameter
qs
22
For fitting on exhaust ports
Blanking plate
VABB-P1
For vacant position; seal and countersunk screws included in the scope of delivery
23
-V- New

System overview
VPPM for valve terminal MPA
4
5
Accessories
1
2
3
4
5
6
Valve terminal MPA

Proportional pressure regulator VPPM
Electrical manifold module
VMPA1-FB-EV-AB
Sub-base VMPA-FB-AP-P1
Push-in fitting QS
Attachment VMPA-BG
Brief description
Page/Internet
With fieldbus connection and VPPM

For valve terminal MPA
For sub-base of the proportional pressure regulator
mpa
mpa
mpa
Without electrical manifold module and electrical module
mpa
qs
mpa
13
-V- New

Type codes
VPPM
1 G18
0L
6H V1
N S1
Type
VPPM
Modular proportional pressure regulator
Nominal diameter
6
6 mm
Design
L
F
In-line valve
Flanged valve
Mounting method
Freely mountable
Dynamic response class
L
Low
Valve function
1
3/2-way valve, normally closed
Pneumatic connection
G18
F
Thread Gx
Flange/sub-base
Lower pressure value of regulation range

0L
0 bar
Upper pressure value of regulation range

2H
6H
10H
2 bar
6 bar
10 bar
Setpoint specification for individual valve

V1
A4
0 10 V
4 20 mA
Switching output
N
P
Negative switching
Positive switching
Accuracy
S1
2% (standard)
1%
Operator unit
C1
14
LED (standard)
With LCD, pressure unit variable
-V- New

Technical data
-M-P-L-
Flow rate
380 1,400 l/min
Voltage
21.6 26.4 V DC
Pressure regulation range

0.02 10 bar
Variants
Setpoint input as analogue voltage
signal 0 10 V
Setpoint input as analogue current
signal 4 20 mA
LED version
With LCD display
NPN or PNP switching output
Integration in valve terminal via
fieldbus
General technical data

Gx
Constructional design
Sealing principle
Actuation type
Type of control
Type of mounting
Mounting position
Nominal diameter
Pressurisation
Exhaust
Standard nominal flow rate

Product weight
[mm]
[mm]
[l/min]
[g]
Sub-base
Valve terminal MPA
Pilot actuated diaphragm regulator

Soft
Electric
Pilot actuated via 2/2-way valves
Via through-hole, via accessories
Any
6
4.5
Graphs
400
Electrical data
Gx
Electrical connection
Operating voltage range
Residual ripple
Max. electrical power consumption
Signal
g setpoint
p
input
p
Protection against short circuit
Protection against polarity reversal
Protection class
CE mark
-H-
[V DC]
Voltage
Current
[W]
[V DC]
[mA]
Sub-base
Valve terminal MPA
Plug, round design, 8-pin, M12

Terminal linking
24 10% = 21.6 26.4
10%
7
0 10
Digitally
g y via fieldbus
4 20
For all electrical connections
IP65
EU conformity in accordance with the directive 89/336/EEC (EMC)
Note
If the power supply cable is

interrupted, output pressure is
maintained unregulated.
15
-V- New

Technical data
Flow rate qn from 1 } as a function of output pressure p2
VPPM-6L--0L2H-
(2 bar)
VPPM-6L--0L10H-
16
(6 bar)
VPPM-6L--0L6H-
(6 bar)
(10 bar)
Flow rate qn from 2 } 3 as a function of output pressure p2

VPPM-6L--0L2H-
(2 bar)
VPPM-6L--0L10H-
VPPM-6L--0L6H-
(10 bar)
-V- New

Technical data
Operating and environmental conditions
[bar]
0.02 2
[bar]
[mbar]
[%]
[%]
[%/C]
[C]
[C]
[CRC]
Compressed air, filtered, unlubricated, grade of filtration 40 m

Neutral gases
0 42)
0 82)
0 112)
10
30
50
0.5
0.5
0.04/1
0 60
10 50
21)
Operating medium
Supply pressure 1
Max. hysteresis
FS (full scale) linearity error
FS (full scale) repetition accuracy
Temperature coefficient
Ambient temperature
Temperature of medium
Corrosion resistance
0.06 6
0.1 10
*
1)
2)
Corrosion resistance class 2 as per Festo standard 940 070

Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
Supply pressure 1 should always be 1 bar greater than the maximum regulated output pressure.
Materials
Sectional view
1
2
Housing
Diaphragm
Wrought aluminium alloy

Nitrile rubber
17
-V- New

Technical data
Download CAD data www.festo.com
With LCD
Dimensions
VPPM-6F
1 Socket head screw M5x65

VPPM-6L
With LCD
D1 = Gx
M12 Pin allocation
1
2
3
4
5
6
7
8
18
Digital input D1
DC +24 V supply voltage
Analogue input W
Analogue input W+
Digital input D2
Analogue output X
DC 0 V or GND
Digital output D3
-V- New

Technical data
Ordering data
Overall accuracy 2%
Gx
x
Pressure
regulation range
[bar]
Voltage type 0 10 V
Current type 4 20 mA
Part No.
Type
Part No.
Type
0.02 2
0.06 6
542 233
542 234
554 043
558 337
542 235
554 044
542 245
542 246
558 339
558 347
542 247
VPPM-6L-L-1-G18-0L2H-V1N
VPPM-6L-L-1-G18-0L6H-V1P
VPPM-6L-L-1-G18-0L6H-V1P-C1
VPPM-6L-L-1-G18-0L10H-V1P
VPPM-6F-L-1-F-0L2H-V1N
VPPM-6F-L-1-F-0L6H-V1P-C1
VPPM-6F-L-1-F-0L6H-V1N-C1
542 236
542 237
554 045
558 338
542 238
554 046
542 248
542 249
558 340
VPPM-6L-L-1-G18-0L2H-A4N
VPPM-6L-L-1-G18-0L6H-A4P
VPPM-6L-L-1-G18-0L6H-A4P-C1
VPPM-6L-L-1-G18-0L10H-A4P
VPPM-6F-L-1-F-0L2H-A4N
VPPM-6F-L-1-F-0L6H-A4P-C1
542 250
542 227
542 228
554 039
542 229
554 040
558 335
542 239
542 240
542 241
VPPM-6L-L-1-G18-0L2H-V1N-S1
VPPM-6L-L-1-G18-0L6H-V1P-S1
VPPM-6L-L-1-G18-0L10H-V1P-S1
VPPM-6L-L-1-G18-0L10H-V1P-S1-C1
VPPM-6F-L-1-F-0L2H-V1N-S1
542 230
542 231
554 041
542 232
554 042
558 336
542 242
542 243
542 244
VPPM-6L-L-1-G18-0L2H-A4N-S1
VPPM-6L-L-1-G18-0L6H-A4P-S1
VPPM-6L-L-1-G18-0L10H-A4P-S1
VPPM-6L-L-1-G18-0L10H-A4P-S1-C1
VPPM-6F-L-1-F-0L2H-A4N-S1
0.1 10
Sub-base
0.02 2
0.06 6
0.1 10
Overall accuracy 1%
Gx
x
0.02 2
0.06 6
0.1 10
Sub-base
-H-
0.02 2
0.06 6
0.1 10
Note
Further variants can be ordered using

the modular system.
20
VPPM for MPA fieldbus variant including accessories must be ordered

together with the valve terminal.
internet: mpa
Dimensions
VPPM for valve terminal MPA
1 Socket head screw M4x55
19
-V- New

Ordering data Modular products
0
M Mandatory data
Module No.
Design
Nominal diameter
Valve type
Dynamic response
Valve mode
Type of connection
543 432
VPPM
L
F
G18
F
Order
example
543 432
VPPM
Ordering table
Size
0
M Module No.
543 432
Design
Nominal diameter
Valve type
yp
Dynamic response
Valve mode
Type
yp of connection

1
20
Conditions
Modular pressure regulator

6
In-line
Flanged valve
Low dynamic response (pilot-actuated, soft-sealing)
3/2-way valve, normally closed
Gx thread
Flange/sub-base
Only with connection type G18 (Gx thread)
Transfer order code

543 432
VPPM
1
2
Code
Enter
code
VPPM
-6
L
F
-L
-1
-G18
-F
VPPM
-6
-L
-1
Only with connection type F (flange/sub-base)
-V- New

Ordering data Modular products
0
M Mandatory data
0
O Options
Pressure
regulation range
Alternative lower
pressure
regulation range
Alternative upper
pressure
regulation range
Setpoint
specification
Switching output
Overall accuracy
Operator unit
0L2H
0L6H
0L10H
0.1 10L
0.1 10H
V1
A4
P
N
S1
C1
6.5L
7.1H
A4
S1
C1
Ordering table
Size
Pressure regulation
g
range
g
0
M
Alternative lower pressure
regulation range
Alternative upper pressure
regulation range
Setpoint
p
specification
p
Switchingg output
p
0
O Overall accuracy
Operator unit
3
Conditions
Code
0 2 bar
0 6 bar
0 10 bar
0.1 10 bar
-0L2H
-0L6H
-0L10H
-L
0.1 10 bar
Voltage (standard 0 10 V)
Current (standard 4 20 mA)
Positive switching
Negative switching
-V1
-A4
P
N
1%
With LCD, pressure unit variable
-S1
C1
4
Not with pressure regulation range (0L2H, 0L6H, 0L10H).

Must always be less than alternative upper pressure regulation range H
Enter
code
Not with pressure regulation range (0L2H, 0L6H, 0L10H).

Must always be greater than alternative lower pressure regulation range L
Transfer order code
21
-V- New

Accessories
Sub-base VABM-P1
Material:
Dimensions
1 Proportional pressure regulator

VPPM
Dimensions and ordering data
Valve positions
p
L1
2
3
4
1)
22
113
155
197
L2
L33
Weight
[g]
CRC1)
Part No.
Type
yp
96
138
180
42
84
126
900
1,230
1,565
2
2
2
542 252
542 253
542 254
VABM-P1-SF-G18-2-P3
VABM-P1-SF-G18-3-P3
VABM-P1-SF-G18-4-P3

Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
-V- New

Accessories
Blanking plate VABB-P1
Material:
Wrought aluminium alloy, NBR, steel
Dimensions
1 Countersunk screw M4x10
2 Seal VMPA-
Ordering data
Weight
[g]
CRC
Part No.
Type
yp
35
11)
558 350
VABB-P1
1)

Components requiring low corrosion resistance. Transport and storage protection. Parts that do not have primarily decorative surface requirements, e.g. in internal areas that are not visible or behind covers.
23
-V- New

Accessories
Mounting bracket VAME-P1-A
Material:
Wrought aluminium alloy, steel
Dimensions
1 Socket head screw M4

VPPM
3 Mounting bracket can be

reversed if required
Ordering data
Weight
[g]
CRC
Part No.
Type
yp
71
11)
542 251
VAME-P1-A
1)
24

-V- New

Accessories
H-rail mounting VAME-P1-T
Material:
Wrought aluminium alloy, steel
Dimensions
1 Socket head screw M4

VPPM
3 H-rail NRH
4 H-rail mounting can be rotated

by 180 if required
Ordering data
Weight
[g]
CRC
Part No.
Type
yp
150
11)
542 255
VAME-P1-T
1)

25
-V- New

Accessories
NEBV-M12G8-KD-3-M12G4
For connecting the VPPM with the
analogue input and output modules
of the controller CPX.
Dimensions and pin allocation
A (AI module)
B (AO module)
C
1 Straight socket, 8-pin, to VPPM
26
2 Straight plug, 4-pin, to CPX

modules
-V- New

Accessories
NEBV-M12G8-K-2-M12G4
For connecting the VPPM with the analogue output modules of the controller
CPX.
Dimensions and pin allocation

A (AO module)
L1
Straight
g socket,, M12,,
8-pin to VPPM
Straight
g plug,
p g, M12,,
4-pin to CPX module
2m
5m
Type
Ordering data
Description
p
Cable length
[m]
Straight socket, 8-pin, M12
Angled socket, 8-pin, M12
One straight socket, 8-pin, and one straight plug, 4-pin

One straight socket, 8-pin, and two straight plugs, 4-pin
Part No.
Type
yp
Technical data Internet: plug socket with cable

525 616 SIM-M12-8GD-2-PU
525 618
SIM-M12-8GD-5-PU
542 256
NEBU-M12W8-2-N-LE8
542 257
NEBU-M12W8-5-N-LE8
553 575
553 576
547 888
NEBV-M12G8-KD-3-M12G4
27
Proportional pressure regulators MPPE/VPPE/MPPES

Product range overview
Function
Pressure
regulators
Version
Type
Constructional Pneumatic
design
connection 1
with pilot control via 2/2-way valves (switching valves)

MPPE
Pilot-actuated Gx
poppet valve
G
VPPE
[bar]
5/5
11/12
Pilot-actuated Gx
poppett valve
l
5/2.5
0.15 6
Pilot-actuated G
valve
G
28
[mm]
01
0 22.5
5
06
0 10
with proportional solenoid

MPPES
DirectlyGx
actuated valve
1)
Nominal size Pressure

pressurising/ regulation
exhaust
range1)
7/7
3/2
7/7
11/12
02
06
0 10
Page/Internet
Voltage type
0 10 V
Current type
4 20 mA
34
30
40
Pressure regulation range also by customer request

6
5
4
5
aA
1
aJ
7
1
1
9
1
Accessories
1
2
3
4
5
6
7
8
9
aJ
aA
Push-in fitting QS
Silencer
Setpoint value module MPZ
Angled plug socket MPPE-3-B
Plug socket with cable KMPE-B
Connecting cable KVIA-MPPE
MPPE
Digital input/output
VPPE
Plug socket, angled
SIE-WD-TR
Plug socket, straight SIE-GD
SIM-M12-4WD-5PU
SIM-M12-4GD-5PU
Brief description
Page/Internet
For connecting compressed air tubing with standard O.D.

For fitting in exhaust ports
For generating 6+1 analogue voltage signals
quick star
u
54
46
46
46
35
For controlling the setpoint module
31
sie-wd
sie-gd
46
46
29
Proportional pressure regulators VPPE

Type codes
VPPE
010
Type
VPPE
Proportional pressure regulator with

switching valve head
Valve function
3
3-way pressure regulator
x
Female thread Gx

6
0.15 6 bar
Analogue setpoint value input

010
30
0 10 V

Technical data
-M-P-L-
Variants
Setpoint value input as analogue
voltage signal 0 10 V
Flow rate
600 l/min
Voltage
21.6 26.4 V DC

0.15 6 bar
VPPE-3-

Pneumatic connection 1 and 2
Sealing principle
Actuation mode
Pilot control mode
Type of mounting
Assembly position
Nominal size
Gx
Ventilation
Exhaust
[mm]
[mm]
[l/min]
[g]

Product weight
Pilot-actuated piston regulator

Soft
Electrical
Pilot actuated via 2/2-way valves
Via through-holes
Any
5
2.5
Graphs
420
p2 [bar]
Flow rate qn as a function of the output pressure p2
qn [l/min]
Electrical data
Residual ripple
Max. electrical power consumption
Signal setpoint value input
Protection against polarity reversal
Protection class
CE symbol
[V DC]
[W]
[V DC]
Plug, round design, 4-pin, M12x1

21.6 26.4
10 %
2.5
0 10
IP65
EU conformity in accordance with the directive 89/336/EEC (EMC)
31

Technical data
Operating medium
Input pressure 1
Max. hysteresis
Ambient temperature
Corrosion resistance class CRC1)
[bar]
[bar]
[bar]
[C]
[C]
Filtered compressed air, grade of filtration 40m

Neutral gases
78
0.15 6
0.15
10 50
10 50
2
*
1)
Corrosion resistance class 2 according to Festo standard 940 070

Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants
or lubricating agents.
-H-
Safety advice

Materials
Sectional view
1
2
Housing
Diaphragm

Nitrile rubber
32

Technical data
Dimensions
1 Earth connection
M12x1 Terminal allocation

1
2
3
4
Ordering data
Gx
Power supply
21.6 26.4 V DC
Nominal value ()
GND ()
Nominal value (+) 0 10 V DC

[bar]
Part No.
Type
06
539 639
VPPE 3 x 6 010
VPPE-3-x-6-010
33
Proportional pressure regulators MPPE

Type codes
Basic version
MPPE
MPPE
010
Type
MPPE

switching valve
Valve function
3
x
Gx
G
G

1
2.5
6
10
0 1 bar
0 2.5 bar
0 6 bar
0 10 bar

010
420
Analogue voltage signal

Analogue current signal
Generation
B
B series
Special pressure regulation range by customer request

3
010
Type
MPPE

switching valve
Valve function
3
x
Gx
G
G
Required pressure at 0 V or 4 mA [bar]

010
420

Generation
B
34
B series

Technical data
-M-P-L-
Variants
current signal 4 20 mA
Flow rate
350 5,500 l/min
Voltage
18 30 V DC
Pressure regulation ranges

0 1 bar
0 2.5 bar
0 6 bar
0 10 bar
MPPE-3--B

Sealing principle
Actuation type
Type of pilot control
Type of mounting
Mounting position
Nominal size
Gx
Ventilation
Exhaust
Pilot actuated piston regulator

Soft
Electrical
Pilot actuated using 2/2-way valves
Via through-holes
Any
5
7
5
7
Diagrams
710
920
11
12

Pneumatic connection Gx
Pressure regulation range 0 1 bar
Pressure regulation range 0 2.5 bar
p2 [bar]
2,400
p2 [bar]

Product weight
[mm]
[mm]
[l/min]
[g]
qn [l/min]
p2 [bar]
p2 [bar]
qn [l/min]
qn [l/min]
qn [l/min]
35

Pneumatic connection G
p2 [bar]
p2 [bar]
Technical data
p2 [bar]
qn [l/min]
p2 [bar]
qn [l/min]
qn [l/min]
qn [l/min]
p2 [bar]
p2 [bar]
qn [l/min]
p2 [bar]
p2 [bar]
qn [l/min]
36
qn [l/min]
qn [l/min]

Technical data
[bar]
Operating medium
Input pressure 1
Max. hysteresis
Ambient temperature
[bar]
[mbar]
[C]
[C]
01
0 2.5
06
0 10
Filtered compressed air, lubricated or unlubricated

Neutral gases
1.5 2
3.5 4.5
78
30
40
40
0 50
0 60
2
2
2
11 12
50
*
1)

Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as
cooling or lubricating agents.
Response times/step responses to output 2 at p1max [s]

Pressure regulation range 0 1
[bar]
Volume to output 2
On1)
Off2)
0l
0.7
7l
2l
1)
2)
Gx
G
G
Gx
G
G
Gx
G
G
0.095
0.140
0.170
0.140
0.150
0.120
0.340
0.360
0.330
0.165
0.225
0.500
0.250
0.280
0.510
0.730
0.620
0.600
0 2.5
06
0 10
On1)
Off2)
On1)
Off2)
On1)
Off2)
0.100
0.150
0.170
0.180
0.170
0.130
0.380
0.400
0.410
0.180
0.260
0.500
0.310
0.320
0.520
0.990
0.700
0.720
0.100
0.150
0.170
0.220
0.180
0.160
0.430
0.540
0.570
0.190
0.260
0.510
0.340
0.360
0.560
1.250
0.930
1.000
0.125
0.160
0.140
0.250
0.200
0.180
0.600
0.540
0.540
0.220
0.280
0.535
0.380
0.390
0.600
1.160
1.050
1.000
On = 0 90% p2max.
Off = 100 10% p2max.
Electrical data
Residual ripple
Power consumption
Signal
g setpoint
p
value input
p
Signal
g actual value output
p
Signal
g actual value input
p
external
[bar]
Voltage
Current
Voltage
Current
Voltage
Current
UB
[V DC]
Pmax.
Uw
Iw
Ux
Ix
Ux,ext.
Ix,ext.
[W]
[V DC]
[mA]
[V DC]
[mA]
[V DC]
[mA]
Protection class to DIN 60 529

Safety note
Protection against polarity
reversal
Voltage signal 0 10 V
Current signal 4 20 mA
01
0 2.5
06
0 10
Plug, round design to DIN 45 326, M16 x 0.75, 8-pin

18 30
10%
3.6 (at 30 V DC and 100% duty cycle)
0 10
4 20
0 10
4 20
0 10
4 20
IP65 (with connection socket)
If the power supply cable is interrupted, output pressure is maintained unregulated
For operating voltage
No
37

Technical data
Materials
Sectional view
1
2
Housing
Diaphragm

Nitrile rubber
2
1
Dimensions
D1
B1
H1
H2
H3
H4
H5
H6
L1
Gx
G
G
38
48
76
38
38
4.5
4.5
7
129.1
140.7
194.6
119.1
130.7
184.6
60.2
63.6
117.5
18.8
25.3
53
26.8
34.8
74
9.3
13.8
32
4
5
18
62
62
86
34
30
50
38

Technical data
Terminal allocation
Ordering data
Basic version
Gx
x
Special adaptation type1)

Gx
G
G
1)
Switching function
1 WH
Xext,in (external actual value input)
2 BN
GND
3 GN
GND
4 YE
Win (setpoint value input)
5 GY
10 Vout (external potentiometer supply)
6 PK
Xout (actual value output)
7 RD
24 V DC (supply voltage)
8 BU
GND
Pressure regulation
range
[bar]
Voltage type 0 10 V
Part No.
Type
Part No.
Type
01
0 2.5
06
0 10
01
0 2.5
06
0 10
01
0 2.5
06
0 10
161 160
164 315
161 161
161 162
161 166
164 317
161 167
161 168
161 172
164 319
161 173
161 174
MPPE-3-1/8-1-010-B
MPPE-3-1/8-2,5-010-B
MPPE-3-1/8-6-010-B
MPPE-3-1/8-10-010-B
MPPE-3-1/4-1-010-B
MPPE-3-1/4-2,5-010-B
MPPE-3-1/4-6-010-B
MPPE-3-1/4-10-010-B
MPPE-3-1/2-1-010-B
MPPE-3-1/2-2,5-010-B
MPPE-3-1/2-6-010-B
MPPE-3-1/2-10-010-B
161 163
164 316
161 164
161 165
161 169
164 318
161 170
161 171
161 175
164 320
161 176
161 177
MPPE-3-1/8-1-420-B
MPPE-3-1/8-2,5-420-B
MPPE-3-1/8-6-420-B
MPPE-3-1/8-10-420-B
MPPE-3-1/4-1-420-B
MPPE-3-1/4-2,5-420-B
MPPE-3-1/4-6-420-B
MPPE-3-1/4-10-420-B
MPPE-3-1/2-1-420-B
MPPE-3-1/2-2,5-420-B
MPPE-3-1/2-6-420-B
MPPE-3-1/2-10-420-B
0 10
0 10
0 10
164 330
164 331
164 332
MPPE-3-1/8---010-B1)
MPPE-3-1/4---010-B1)
MPPE-3-1/2---010-B1)
164 330
164 331
164 332
MPPE-3-1/8---420-B1)
MPPE-3-1/4---420-B1)
MPPE-3-1/2---420-B1)
The special adaptation type allows a lower pressure to be assigned to the setpoint value 0 V or 4 mA and
an upper pressure to be assigned to the setpoint value 10 V or 20 mA. Upper and lower pressure by customer request.
39
Proportional pressure regulators MPPES

Type codes
Basic version
MPPES
MPPES
010
Type
MPPES

proportional solenoid
Valve function
3
x
Gx
G
G

2
6
10
0 2 bar
0 6 bar
0 10 bar

010
420

Special pressure regulation range by customer request

3
010
Type
MPPES

proportional solenoid
Valve function
3
x
Gx
G
G

010
420
40


Technical data
-M-P-L-
Variants
Flow rate
230 5,500 l/min
Voltage
18 30 V DC
Pressure regulation ranges

0 2 bar
0 6 bar
0 10 bar
MPPES-3-x-

Sealing principle
Actuation type
Type of mounting
Mounting position
Nominal size
Ventilation
Exhaust
Gx
Directly actuated piston

regulator
Soft
Electrical
Direct
Via through-holes
Any
3
2
Diagrams
915
Pilot actuated piston regulator
Pilot actuated
11
12
1 310
2 670
p2 [bar]
7
7

Pneumatic connection Gx
qn 1 2 [l/min]
MPPES-3--
p2 [bar]

Product weight
[mm]
[mm]
[l/min]
[g]
MPPES-3--
qn 1 2 [l/min]
p2 [bar]
qn 1 2 [l/min]
41

p2 [bar]
p2 [bar]
Technical data
qn 1 2 [l/min]
qn 1 2 [l/min]
p2 [bar]
qn 1 2 [l/min]
p2 [bar]
p2 [bar]
qn 1 2 [l/min]
qn 1 2 [l/min]
p2 [bar]
qn 1 2 [l/min]
42

Technical data
[bar]
Operating medium
Input pressure 1
Max. hysteresis
Ambient temperature
[bar]
[mbar]
[C]
[C]
02
06
0 10
Filtered compressed air, lubricated or unlubricated

Neutral gases
34
78
10
50
0 50
0 60
2
2
11 12
50
*
1)

Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as
cooling or lubricating agents.
Response times/step responses to output 2 at p1max [s]

Pressure regulation range 0 2
[bar]
Volume to output 2
On1)
Off2)
0l
2l
10 l
1)
2)
Gx
G
G
Gx
G
G
Gx
G
G
0.220
0.200
0.220
0.660
0.200
0.320
2.700
0.900
0.800
06
0.410
0.890
1.000
2.530
1.000
1.000
2.800
2.700
1.400
0 10
On1)
Off2)
On1)
Off2)
0.210
0.200
0.230
1.200
0.450
0.340
5.150
1.500
1.100
0.280
0.640
0.660
5.760
0.760
0.570
24.000
3.000
1.500
0.200
0.200
0.230
1.370
0.460
0.350
5.800
1.900
1.300
0.290
0.360
0.450
6.300
0.900
0.630
27.000
3.400
1.800
On = 0 90% p2max.
Off = 100 10% p2max.
Electrical data
Residual ripple
Power consumption
Signal
g setpoint
p
value input
p
Signal
p
Signal
p
external
[bar]
Voltage
Current
Voltage
Current
Voltage
Current
UB
[V DC]
Pmax.
Uw
Iw
Ux
Ix
Ux,ext.
Ix,ext.
[W]
[V DC]
[mA]
[V DC]
[mA]
[V DC]
[mA]
Protection class to DIN 60 529

Safety note
Protection against polarity
reversal
Voltage signal 0 10 V
Current signal 4 20 mA
02
06
0 10
Plug, round design to DIN 45 326, M16 x 0.75, 8-pin

18 30
10%
20 (at 30 V DC)
0 10
4 20
0 10
4 20
0 10
4 20
IP65 (with connection socket)
If the power supply cable is interrupted, output pressure is maintained unregulated.
For operating voltage
No
43

Technical data
Materials
Sectional view
1
2
Housing
Diaphragm

Nitrile rubber
2
1
-H-
Note

Dimensions
MPPES-3-x-
D1
Gx
G
G
44
MPPES-3--
MPPES-3--
MPPES-3--
MPPES-3--
MPPES-3-x-
B1
H1
H2
H3
H4
H5
H6
L1
77.1
82.1
96.1
67.1
72.1
86.1
4.4
4.5
7
116.5
170.2
227.1
100
153.7
210.6
55
63.7
120.6
34
25.3
53
45
34.8
74
23
13.8
32
4
5
18
62
62
86
34
30
50

Technical data
Connections
Switching function
Terminal allocation
MPPES-3-x-
Ordering data
Basic version
Gx
x
Special adaptation type1)

Gx
G
G
1)
1 WH
n. c.
2 BN
GND
3 GN
GND
4 YE
Win (setpoint value input)
5 GY
n. c.
6 PK
Xout (actual value output)
7 RD
24 V DC (supply voltage)
8 BU
GND
MPPES-3--/MPPES-3--
Pressure regulation
range
[bar]
Voltage type 0 10 V
Part No.
Type
Part No.
Type
02
06
0 10
02
06
0 10
02
06
0 10
187 350
187 352
187 348
187 335
187 337
187 333
187 328
187 330
187 326
MPPES-3-x-2-010
MPPES-3-x-6-010
MPPES-3-x-10-010
MPPES-3--2-010
MPPES-3--6-010
MPPES-3--10-010
MPPES-3--2-010
MPPES-3--6-010
MPPES-3--10-010
187 351
187 353
187 349
187 336
187 338
187 334
187 329
187 331
187 327
MPPES-3-x-2-420
MPPES-3-x-6-420
MPPES-3-x-10-420
MPPES-3--2-420
MPPES-3--6-420
MPPES-3--10-420
MPPES-3--2-420
MPPES-3--6-420
MPPES-3--10-420
0 10
0 10
0 10
187 347
187 339
187 332
MPPES-3-x-PU-PO-010
MPPES-3--PU-PO-010
MPPES-3--PU-PO-010
187 762
187 744
187 735
MPPES-3-x-PU-PO-420
MPPES-3--PU-PO-420
MPPES-3--PU-PO-420
The special adaptation type allows a lower pressure PU to be assigned to the setpoint value 0 V or 4 mA and
an upper pressure PO to be assigned to the setpoint value 10 V or 20 mA. PU and PO by customer request.
45

Accessories
Ordering data
Description
Cable length
[m]
Part No.
Type
Connectingg cable to the analogue

g module of valve terminal
type
yp 03/04
/
5
10
163 882
163 883
Technical data Internet: kvia

KVIA-MPPE-5
KVIA-MPPE-10
Straight,
g , 4-pin,
p , M12x1
164 259
Technical data Internet: sim-m12

SIM-M12-4GD-5-PU
Angled,
g , 4-pin,
p , M12x1
164 258
Technical data Internet: sim-m12

SIM-M12-4WD-5-PU
Angled,
g , 8-pin,
p , M16x0.75
75
2.5
5
161 879
161 878
Technical data Internet: kmppe

KMPPE-B-2,5
KMPPE-B-5
Straight,
g , 4-pin,
p , M12x1
18 494
Technical data Internet: sie-gd

SIE-GD
Angled, 4-pin, M12x1
12 956
Technical data Internet: sie-wd

SIE-WD-TR
Angled, 8-pin, M16x0.75
161 839
Technical data Internet: mppe

MPPE-3-B
Connecting cable
Sensor socket
Sensor socket
Angled plug socket
Technical data Internet: quick star
Push-in fitting
For connectingg compressed
p
air tubingg with standard external
diameters
Technical data Internet: u
Silencer
For fittingg in exhaust pports
Reducing nipple
1)
46
Max. 10 m
Proportional directional control valves MPYE

Key features
General information
The directly actuated proportional
directional control valve has a
position-controlled spool. This
transforms an analogue input
signal into a corresponding
opening cross-section at the valve
outputs.
In combination with an external

position controller and displacement encoder, a precise pneumatic
positioning system can be created.
Flow control function for varying

cylinder speed
5/3-way function for varying the
direction of movement
Wide choice of variants

Flow rates from

100 2 000 l/min
47

Key features and type codes
Short machine cycle times fast switching of programmed flow rates
A:
Proportional valves allow

different speed levels and speed
ramps to be set.
B:
Speed regulation with directional

control valves is more difficult
and is performed by means of
exhaust air flow control.
Rapid speed
Cylinder speed
Reduce machine cycle times by

optimising cylinder speeds
Assembly technology
Handling technology
Furniture industry
Medium speed
Creep speed
Cylinder stroke
Flexible cylinder speeds Achieving variable flow rates
Cylinder speed
Flexibly adapting cylinder speeds

to the process. Traversing
individual acceleration ramps
(gentle approach with delicate
goods)
Automobile suppliers
Production technology
Conveyor technology
Test engineering
Cylinder stroke
Proportional directional control valve as final control element Dynamic and fast changing of flow rates
Cylinder speed
Fatigue tests
Pneumatic positioning with
SPC200
SoftStop with end-position
controller SPC11
Time
Type codes
MPYE
x LF
010
Type
MPYE
Proportional directional control valve
Valve function
5
5/3-way valve
M5
x LF
x HF
M5
Gx Low Flow
Gx High Flow
G
Gy

010
420

Generation
B
48
B series

7
6
5
4
2
1
2
1
1
Accessories
1
2
3
4
5
6
7
8
9
Brief description
Page/Internet
Push-in fitting
QS
Silencer
For connecting compressed air tubing with standard external diameters
quick star
For fitting in exhaust ports
Setpoint module
MPZ
Sensor socket
SIE-WD-TR
Sensor socket
SIE-GD
Connecting cable
KMPYE
Connecting cable
KVIA-MPYE
Proportional directional control valve
MPYE
Digital input/output
For generating 6+1 analogue voltage signals
mpz
53
Straight, 4-pin, M12x1
53
53
Connecting cable to the analogue module of valve terminal type 03
53
50
For controlling the setpoint module
49

Technical data
Function
-P-M-L-
Variants
Voltage
17 30 V DC
Flow rate
100 2 000 l/min
Pressure
0 10 bar

Valve function
Sealing principle
Actuation type
Type of reset
Direction of flow
Type of mounting
Mounting position1)
Operating medium
Nominal size
Product weight
1)
M5
[mm]
[l/min]
[g]
Gx
Low flow
5/3-way, normally closed

Piston spool, directly actuated, controlled piston spool position
Hard
Electrical
Mechanical spring
Direct
Non-reversible
Via through-holes
Any
Compressed air, filtered (to 5 m), unlubricated
2
4
6
100
350
700
290
330
330
Gy
8
1 400
530
10
2 000
740
If the proportional directional control valve is in motion during operation, it must be mounted at right angles to the direction of movement.
Current type MPYE-5--420-B
q [%]
q [%]
Flow rate q at 6 > 5 bar as a function of the setpoint voltage U

Voltage type MPYE-5--010-B
Uw [V]
50
G
High flow
Iw [mA]

Technical data
Electrical data
Power supply
Max. current consumption
p
Setpoint
p
value
Max. hysteresis1)
Valve mid-position
p
in mid-position
at full stroke
Voltage type
Current type
Voltage type
Current type
Duty cycle2)
Critical frequency3)
Safety setting
Protection against
g
ppolarityy
reversal
Protection class
1)
2)
3)
M5
Voltage type
Current type
[V DC]
[mA]
[mA]
[V DC]
[mA]
[%]
[V DC]
[mA]
[%]
[Hz]
Gx
Low flow
Gy
High flow
17 30
100
1 100
0 10
4 20
0.4
5 (0.1)
12 (0.16)
100
125
100
100
90
Active mid-position in the event of setpoint value cable break
For setpoint value
IP65
4-pin plug socket, round design, M12x1
65
Referred to the maximum stroke of the piston spool.

The proportional direction control valve automatically switches off if it overheats (goes to mid-position) and switches back on once it cools down.
Corresponds to the 3dB frequency at the maximum movement stroke of the piston spool.

Operating pressure
Ambient temperature
Vibration resistance1)
Continuous shock resistance1)
CE symbol
[bar]
[C]
[C]
0 10
0 50
To DIN/IEC 68 Parts 2 -6, severity level 2
To DIN/IEC 68 Parts 2 -27, severity level 2
To 89/336/EEC (EMC regulation)
5 40, condensation not permitted
*
1)
If the proportional directional control valve is in motion during operation, it must be mounted at right angles to the direction of movement.
Materials
Sectional view
1
1
2
3
Housing
Valve spool
Housing for electronics
Seals
Anodised aluminium
Tempered aluminium
Galvanised acrylic butadiene styrene
Nitrile rubber
51

Technical data
Dimensions
D1
B1
H1
H2
H3
H4
M5
Gx
G
Gy
26
26
35
40
26
26
5.5
5.5
6.5
6.5
129.9
149.3
164.6
176.6
69
88.4
103.7
115.7
56.1
71.3
79.6
98.4
38.1
55.1
68.1
79.4
32.1
45.8
56.6
65.4
D1
M5
Gx
G
Gy
H5
H6
H7
H8
L1
L2
L3
L4
20.1
26.8
33.6
37.4
38.1
55.3
68.1
82.4
26.1
36.3
45.1
51.4
14.1
17.3
22.1
20.4
45
45
58
67
45
45
14.8
14.8
14.8
14.8
3.2
3.2
3.2
3.2
32
35
46
54
Terminal allocation
1
2
3
4
Ordering data
Pneumatic
connection
M5
Gx
x
G
Gy
52
24 V DC, supply voltage

GND
Uw/IW, setpoint input
GND
Voltage type 0 10 mV
Part No.
Type
Part No.
Type
154 200
151 692
151 693
151 694
151 695
MPYE-5-M5-010-B
MPYE-5-xLF-010-B
MPYE-5-xHF-010-B
MPYE-5--010-B
MPYE-5-y-010-B
162 959
161 978
161 979
161 980
161 981
MPYE-5-M5-420-B
MPYE-5-xLF-420-B
MPYE-5-xHF-420-B
MPYE-5--420-B
MPYE-5-y-420-B

Accessories
Ordering data
Description
Cable length
[m]
Part No.
Screened
151 909
X length1)
151 910
KMPYE-
161 984
KVIA-MPYE-5
10
161 985
KVIA-MPYE-10
0.3
170 239
KMPYE-AIF-1-GS-GD-0,3
170 238
KMPYE-AIF-1-GS-GD-2
Straight,
g , 4-pin,
p , M12x1
18 494
Technical data Internet: sie-gd

SIE-GD
12 956
Technical data Internet: sie-wd

SIE-WD-TR
Connecting cable
Connecting cable to the analogue module of valve terminal

type
yp 03
Connecting cable to the axis interface of the axis controller

SPC200
Sensor socket
Sensor socket
Type
Technical data Internet: kmpye, kvia
KMPYE-5
Technical data Internet: quick star
Push-in fitting
For connectingg compressed
p
air tubingg with standard external
diameters
Technical data Internet: u
Silencer
For fittingg in exhaust pports
Reducing nipple
1)
Max. 10 m
53

Accessories
Function
Generation of 6+1 analogue setpoint values for the proportional
pressure regulators MPPE, MPPES
and MPYE
Digital controller
Output voltage adjustable via
spindle potentiometer
Setpoint module MPZ
-P-
Voltage
20 30 V DC

Mode of operation
Connection cross section
Adjustable output voltage
Max. output current
Power consumption at 24 V DC
Supply
pp y setpoint
p
value adjustment
j
Voltage
Current
Voltage
Potentiometer
Input resistance
External setpoint
p
input
p
Setpoint controller
Residual ripple
Display
p y
[mm]
[V DC]
[V DC]
[mA]
[W]
[V]
[mA]
[V DC]
[k]
[k]
[%]
Ready
Setpoint active
Type of mounting
Assembly position
Product weight
[g]
Digital-analogue circuit with analogue output

Screw terminal
2.5
20 30
0 10
27
1.5
10 10.6
6 6.36
0 10
2.5 10
3
Max. 10
Green LED
Yellow LED
On H-rail
Any
80

Ambient temperature
Protection class
CE symbol (declaration of conformity)
1)
54
[C]
0 60
IP20
In accordance with EU EMC directive
2

Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as
coolants or lubricating agents

Accessories
Connections and control elements
Connections
31
32
33
34
35
11
13
21
22
23
24
41
42
43
45
1 Operational
p
status display,
p y,
green LED
2 Setpoint display active
(
(SP1
SP6),) yellow LED
3 SSetpoint
i potentiometer
i
S SP6
SP1
S
4 IInscription
i i label
l b l
Priority
Activate setpoint 1
Activate setpoint 2
Activate setpoint 3
Activate setpoint 4
Activate setpoint 5
Activate setpoint 6
Control line
Control line
External setpoint input
Control line
Screening
Control line
Setpoint output
Power supply
Power supply
SP1
SP2
SP3
SP4
SP5
SP6
0V
0V
Uw, in = 0 10 V DC
10 V DC
PE
0 V DC
Uw, out
1 (highest)
2
3
4
5
6
7 (lowest)
Dimensions
1 H-rail to DIN EN 60715
Ordering data
Description
Part No.
Type
Setpoint module for generating 6 + 1 analogue voltage signals
546 224
MPZ-1-24DC-SGH-6-SW
55
Products and services everything from a single source

Products incorporating new ideas are
created when enthusiasm for technology and efficiency come together.
Tailor-made service goes without
saying when the customer is the focus
of attention.
Pneumatic and electrical drives
Valves and valve terminals
Compressed air preparation
Standard valves
Universal and applicationoptimised valves
Manually and mechanically
actuated valves
Shut-off, pressure control and flow
control valves
Proportional valves
Safety valves
Pneumatic cylinders
Semi-rotary drives
Handling modules
Servopneumatic positioning
systems
Electromechanical drives
Positioning controllers and
controllers
Service unit combinations

Filter regulators
Filters
Pressure regulators
Lubricators
On-off and soft-start valves
Dryers
Pressure amplifiers
Accessories for compressed air
preparation
Fieldbus systems/
electrical peripherals
Fieldbus Direct
Installation system CP/CPI
Modular electrical terminal CPX
Components
Customer-specific solutions
Modules
Industry-specific solutions
Systems
Services from Festo to increase your productivity across the entire value creation sequence
< Engineering for greater speed in

the development process
CAD models
14 engineering tools
Digital catalogue
FluidDRAW
More than 1,000 technical
consultants and project engineers
worldwide
Technical hotlines
56
< Supply chain for greater speed in

the procurement process
E-commerce and online shop

Online order tracking
Euro special manufacturing service
Logistics optimisation
Gripping and vacuum technology
Sensors and monitoring units
Controllers/bus systems
Accessories
Pneumatic and electropneumatic

controllers
Programmable logic controllers
Fieldbus systems and accessories
Timers/counters
Software for visualisation and data
acquisition
Display and operating units
Vacuum generators
Vacuum grippers
Vacuum security valves
Vacuum accessories
Standard grippers
Micro grippers
Precision grippers
Heavy-duty grippers
Proximity sensors
Pressure and flow sensors
Display and operating units
Inductive and optical proximity
sensors
Displacement encoders for
positioning cylinders
Optical orientation detection and
quality inspection
Pipes
Tubing
Pipe connectors and fittings
Electrical connection technology
Silencers
Reservoirs
Air guns
All in all, 100% product and service quality

A customer-oriented range with unlimited flexibility:
Components combine to produce ready-to-install modules and
systems. Included in this are special designs since at Festo, most
industry-specific products and customer-specific solutions are based
on the 23,000 plus catalogue products. Combined with the services
for the entire value creation sequence, the end result is unbeatable
economy.
< Assembly for greater speed in the

assembly/commissioning process
< Operation for greater speed in the

operational process
Spare parts service
Energy saving service
Compressed air consumption
analysis
Compressed air quality analysis
Customer service
Prepack
Preassembly
Turnkey pneumatics
Handling solutions
57
What must be observed when using Festo components?
Specified limit values for technical

data and any specific instructions
must be adhered to by the user in
order to ensure recommended operating conditions.
When pneumatic components are
used, the user shall ensure that they
are operated using correctly prepared
compressed air without aggressive
media.
When Festo components are used in
safety-oriented applications, the user
shall ensure that all applicable
58
national and local safety laws and

regulations, for example the machine
directive, together with the relevant
references to standards are observed.
Unauthorised conversions or modifications to products and systems from
Festo involve a safety risk and are
thus not permissible.
Festo does not accept any liability for
resulting damages.
You should contact Festos advisors if
one of the following apply to your
application:
The ambient conditions and conditions of use or the operating medium differ from the specified
technical data.
The product is to perform a safety
function.
A risk or safety analysis is required.
You are unsure about the products
suitability for use in the planned
application.
You are unsure about the products
suitability for use in safety-oriented
applications.
All technical data applies at the time

of going to print.
All texts, representations, illustrations
and drawings included in this catalogue are the intellectual property of
Festo AG & Co. KG, and are protected
by copyright law.
All rights reserved, including translation rights. No part of this publication
may be reproduced or transmitted in
any form or by any means, electronic,
mechanical, photocopying or otherwise, without the prior written permission of Festo AG & Co. KG. All
technical data subject to change
according to technical update.

Festo VPPM Fast Switching Solenoids

Uploaded by

Copyright:

Available Formats

Festo VPPM Fast Switching Solenoids

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Festo VPPM Fast Switching Solenoids

Uploaded by

Copyright:

Available Formats

Proportional pressure regulators and valves VPPM,

VPPE, MPPE, MPPES, MPYE and the new VPPM-MPA

Precise, infinite regulation

Reliable pressure and flow control

Applying pressure correctly plus easy installation and precise regulation

Regulation at the press of a button

sturdy with 3 presets

variable via fieldbus

VPPM the new dimension

Info 241 Subject to change 2008/07

Advantages for commissioning and

Only from Festo reliable regulation

LED or LCD versions of proportional

Without multi-sensor control

2008/07 Subject to change Info 241

Versatile integration into

Faster configuration using CPX macro

High flexibility due to individual

Compact vision system

Simple service and commissioning

Info 241 Subject to change 2008/07

Manual pressure regulator

MPA2: manifold block

Integrated VPPM proportional

MPA1: Manifold block

Extremely adaptable connection

2008/07 Subject to change Info 241

systems side-by-side leading to

Innovation thanks to function

Proportional pressure regulators VPPM

Plug socket with cable

Venting at both ends

Info 241 Subject to change 2008/07

Proportional pressure regulators VPPM

2008/07 Subject to change Info 241

For all common protocols

Proportional pressure regulators VPPM

(Valve output and all

deviation e and actuates the final

or a change in load. The disturbance

Multi-sensor control (cascade control) of the VPPM

system is divided into smaller subcontrolled circuits that are easier to

Info 241 Subject to change 2008/07

Proportional pressure regulators VPPM

A perfectly linear progression of the

Repetition accuracy (reproducibility)

The repetition accuracy is the margin

Pressure range adaptation

If, for example, a VPPM cannot be

Zero point suppression

2008/07 Subject to change Info 241

Proportional pressure regulators VPPM

Setpoint value input

With LED for valve terminal MPA

Info 241 Subject to change 2008/07

Proportional pressure regulators VPPM

Plug socket with cable, angled

Operator unit with LED

Operator unit with LCD