Scribd
Upload
28 views3 pages

Assignment No 0 SF and BM Diagrams, Centroid and Moment of Inertia Bending Stresses, Shear Stresses and Deflection Due Date: 26/09/2014

This document contains an assignment with 5 questions about structural analysis concepts: 1) Plotting shear force and bending moment diagrams and calculating stresses for a beam, 2) Drawing shear force and bending moment diagrams for a beam in two planes, 3) Locating the centroid and finding moment of inertia for a cross section, 4) Determining maximum deflection and slope for two beams using the double integration method. The assignment is due on September 26th, 2014 and includes figures to reference for the beam and loading configurations.

Uploaded by

MrJajas Guruh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
28 views3 pages

Assignment No 0 SF and BM Diagrams, Centroid and Moment of Inertia Bending Stresses, Shear Stresses and Deflection Due Date: 26/09/2014

This document contains an assignment with 5 questions about structural analysis concepts: 1) Plotting shear force and bending moment diagrams and calculating stresses for a beam, 2) Drawing shear force and bending moment diagrams for a beam in two planes, 3) Locating the centroid and finding moment of inertia for a cross section, 4) Determining maximum deflection and slope for two beams using the double integration method. The assignment is due on September 26th, 2014 and includes figures to reference for the beam and loading configurations.

Uploaded by

MrJajas Guruh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment No 0

SF and BM Diagrams, Centroid and Moment of Inertia


Bending stresses, Shear stresses and Deflection
Due Date : 26/09/2014
1. For the beam loaded as shown in figure 1a, Plot the SF and BM diagram and find the
maximum bending stress and maximum shear stress if the cross section of the beam is as
shown in figure 1b. Take E = 200 GPa.

Figure 1a

Figure 1b

2. Draw the SF and BM diagrams for the horizontal plane and vertical plane for the beam shown
in figure 2.

0.5

2
kN

Figure 2

3. Locate the centroid and find the moment of inertia about the centroidal axes xx and yy
for the cross section shown in Figure 3

Figure 3

4. For the beams with loading as shown in figure 4 and figure 5, determine the maximum
deflection and maximum slope with EI = 93750 N-m2. (Use double integration method)

Figure 4

Figure 5

You might also like