Scribd
Upload
1K views

RNC Moshell Commands

The document contains commands to check the status of various components on a Radio Network Controller (RNC), including boards, ports, synchronization, protocols, devices, and cells. It lists the commands to check plug status, Iub interface links, ATM ports, synchronization, AAL layers, UNI and NNI signaling, common and dedicated channel devices, packet data routers, Iur interfaces, special purpose processors, ET-M connections, MTP, SCCP, RANAP, NBAP, and RNSAP protocols, and cell status. The final command gets more information about a particular management object.

Uploaded by

RobertTabut
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

RNC Moshell Commands

The document contains commands to check the status of various components on a Radio Network Controller (RNC), including boards, ports, synchronization, protocols, devices, and cells. It lists the commands to check plug status, Iub interface links, ATM ports, synchronization, AAL layers, UNI and NNI signaling, common and dedicated channel devices, packet data routers, Iur interfaces, special purpose processors, ET-M connections, MTP, SCCP, RANAP, NBAP, and RNSAP protocols, and cell status. The final command gets more information about a particular management object.

Uploaded by

RobertTabut
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Check status of following MOs

RNCxy> st plug

// states of the boards

RNCxy> st iub

// RNC RBS Interface link

RNCxy> st atmport// All ATM Ports


RNCxy> st sync

// Synchronisation

RNCxy> st aal0

// ATM Synchronisation

RNCxy> st aal2

// CS

RNCxy> st aal5

// PS

RNCxy> st unisaal // Used by NBAP protocol towards RBS


RNCxy> st nnisaal // Used by MTP, SCCP and RANAP towards CN, AND MTP, SCCP
and RNSAP towards another RNC
RNCxy> st ccdevice

// common channel devices

RNCxy> st dcdevice

// dedicated channel devices

RNCxy> st pdrdevice

// packet data router devices

RNCxy> st packet // Packet Data Router


RNCxy> st iurccdevice
// common channel devices for Iur Interface (for P2.0
these should be blocked)
RNCxy> st spm

// Special Purpose Processor Modules

RNCxy> st spb

// also shows device to SPB board relationship

RNCxy> st etm1

// ET-M1 connections (2Mbps)

RNCxy> st etm4

// ET-M4 connections (155Mbps)

RNCxy> st mtp

// MTP signalling on Iu and Iur interfaces

RNCxy> st sccp

// SCCP signalling on Iu and Iur interfaces

RNCxy> st ranap
RNCxy> st nbap
RNCxy> st rnsap

// CN-RNC protocol, 1 for CS and 1 for PS


// RNC-RBS protocol (Iub)
// RNC-RNC protocol (Iur) used for Handover

RNCxy> st utrancell

// Cell Status - should be UNLOCKED ENABLED

RNCxy> get 'Cell Proxy'

// more info about particular MO

You might also like