Scribd
Upload
193 views1 page

Deflection Check For Cp-65

This document provides details on checking the deflection of a concrete slab with a thickness of 180mm, effective depth of 155mm, length of 2500mm and width of 1000mm. The slab is reinforced with steel that has a yield strength of 460 N/mm2. Calculations are shown for the required and provided reinforcement areas, steel stress, ultimate moment capacity, and modification factors to check if the assumed span to depth ratio of 16.129 meets the allowable ratio of 10.528.

Uploaded by

Hari Amudhan Ilanchezhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
193 views1 page

Deflection Check For Cp-65

This document provides details on checking the deflection of a concrete slab with a thickness of 180mm, effective depth of 155mm, length of 2500mm and width of 1000mm. The slab is reinforced with steel that has a yield strength of 460 N/mm2. Calculations are shown for the required and provided reinforcement areas, steel stress, ultimate moment capacity, and modification factors to check if the assumed span to depth ratio of 16.129 meets the allowable ratio of 10.528.

Uploaded by

Hari Amudhan Ilanchezhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Deflection Check for a Slab

(Based on CP-65)

SLAB NAME
Type -3
Thickness of the slab
=
180
Effective Depth of the slab considered
=
155
Length of the slab
=
2500
Width of the slab considered
=
1000
Strength of the concrete used,fcu
=
40
Strength of the steel Reinf., fy
=
460
Parameters for Modification Factor Calculations
Area of Reinforcement Required, Asreq
=
1230
Area of Tension Reinf Prov, Asprov
=
2011
Area of Compression Reinf. Prov Asprov
=
664
Stress in Steel,fs
=
175.85
Ultimate Moment
=
55
Span/Effective Depth Ratio based on C
=
7
Tension Modification Factor,Mod(ten)
Compression Modification factor,Mod(c

=
=

1.3369
1.125

Allowable Span/ Depth Ratio


Assumed Span Depth Ratio

=
=

10.528
16.129

mm
mm
mm
mm
N/mm
N/mm
mm
mm
mm
N/mm
kNm

You might also like