Scribd
Upload
222 views3 pages

LED Controller Manual For Screen Manufacturer: 3 Software Settings

This document provides instructions for setting up and using LED controller software for screen manufacturers. It describes connecting the controller via its ports, installing the Windows software, and setting up panel parameters such as dimensions and color type within the software interface. Key steps involve searching for the panel, setting up panel settings, adding and editing programs/messages, and sending programs to the panel or exporting them to a USB disk.

Uploaded by

Kumar Ganka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
222 views3 pages

LED Controller Manual For Screen Manufacturer: 3 Software Settings

This document provides instructions for setting up and using LED controller software for screen manufacturers. It describes connecting the controller via its ports, installing the Windows software, and setting up panel parameters such as dimensions and color type within the software interface. Key steps involve searching for the panel, setting up panel settings, adding and editing programs/messages, and sending programs to the panel or exporting them to a USB disk.

Uploaded by

Kumar Ganka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

LED controller Manual for Screen Manufacturer

1, Controller connectors
1>: sketch map

Figure 1, Controller connectors sketch map


2>: LED control port

Figure 2HUB08

Figure 3, HUB12

2, Software setup
1>: Software Runtime Environment

operating systemWindows2000/XP/Vista/7
2>: Software setup

Click PowerLed_setup.exe on the CD-ROM to setup the application!

Figure 4: Application icon

3 Software Settings
This step is to set the LED screen parameters.

1>: Click menu "Tools"->Panel Setup . as shown in Figure 5

Figure 5, To enter "Panel Setup"


2>: In the "Panel Setup" window, You can set the screen columns(Width) and
rows(Height), and color type .

Figure 6, panel setup window

4 Software interface
1>: Software overview

2>: The 4 steps for use software


Step1: Search panel by button
Step2: Setup panel parameters.
Step3: Add and edit some programs and messages
Step4: Send programs by button
TF-MU

, or export programs to USB disk by button

for

You might also like