Scribd
Upload
148 views

Introduction To Autonomous Robots

The document discusses the essential parts of autonomous robots including the chassis, actuators, electronics, power source and intelligence. It then describes different robot chassis designs including ones with steering wheels and differential drive mechanisms. The advantages and disadvantages of each design are provided.

Uploaded by

Nitin Nauhvar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
148 views

Introduction To Autonomous Robots

The document discusses the essential parts of autonomous robots including the chassis, actuators, electronics, power source and intelligence. It then describes different robot chassis designs including ones with steering wheels and differential drive mechanisms. The advantages and disadvantages of each design are provided.

Uploaded by

Nitin Nauhvar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Tutorial 11

Introduction to Autonomous Robots


Any Autonomous Robot consists of following essential parts.
1. Robot Chassis and actuators
Includes wheeled or any type of chassis with all the necessary actuators fitted on the chassis to achieve desired goal.
We mostly use DC geared motors as actuators.
2. Electronics
Electronics includes Sensors, motion control circuits, power management system etc.
3. Power Source
Usually battery pack consisting of Lead acid, Nickel cadmium, Nickel metal hydride or Lithium batteries is used.
4. Intelligence
This is the most important part of the autonomous robots. Usually intelligence is achieved by using Microcontroller.
First step in making an autonomous robot is to chalk out what tasks we are expecting the robot to perform. After
gauging these we get a vague idea about the design and appearance of the robot.

Robot Chassis Designing


Selecting the Drive Mechanism for the wheeled motion:

Robot with steering wheel:

Power for motion is provided by back wheels and turning is achieved using front wheels.

This scheme is similar to that of cars.

Robotics Club,IIT-Kanpur

Tutorial 11

Advantages:
1. When path to be followed is straight in nature with curved turns this configuration gives fastest speed and
graceful path following.
2. Dont need to modify left or right wheels velocity to follow the path. This is very advantageous when we want
precision velocity control. In this case back wheels take care of velocity control and front wheels take care of
direction control.
Disadvantages:
1. It will not able to take very sharp turns. Hence it is difficult to move robot on the grid of lines.
2. Somewhat difficult and expensive to make.
3. Front wheels will need position feedback to control turning control.

Robot with differential drive:

A method of controlling a robot where the left and right wheels are powered independently.

The Three Wheel Differential drive uses two motors and a caster or an omni-directional wheel easiest to design
and program.

Ball bearing caster, wheel based swivel caster and omni directional wheel

Robotics Club,IIT-Kanpur

Tutorial 11

The radius and centre of rotation can be varied by the varying the relative speed of rotation between the two
motors.

Rotating the wheels in different directions provides a sharp turn.

For a smooth turn, rotate the wheels in the same direction but with different speeds. Greater the difference in
speeds, smaller the radius of rotation.

Advantages:
1. Zero turning radius achievable.
2. Easy to move when path to be followed is contoured and zigzag in nature. E.g., navigating along the maze of
lines.
Disadvantages:
1. If we want to move along curved path we have to control left and right motors velocity independently. Hence
precision velocity control becomes difficult as actual velocity of the robot will be average of the both wheels.

Robotics Club,IIT-Kanpur

You might also like