Scribd
Upload
396 views

Tutorial Dev C++

Dev-C++ is a free IDE that uses MinGW and GCC to create Windows and console C/C++ programs. It provides a graphical interface for writing, compiling, debugging and running C/C++ programs. The tutorial outlines the basic steps to set up a new project in Dev-C++, add source code files, compile and build the project, execute the built program, and use the debugger.

Uploaded by

Wasdodi Al-Assa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
396 views

Tutorial Dev C++

Dev-C++ is a free IDE that uses MinGW and GCC to create Windows and console C/C++ programs. It provides a graphical interface for writing, compiling, debugging and running C/C++ programs. The tutorial outlines the basic steps to set up a new project in Dev-C++, add source code files, compile and build the project, execute the built program, and use the debugger.

Uploaded by

Wasdodi Al-Assa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Dev-C++ Tutorial for

Windows (by Mike Serrano)


What is Dev-C++?
Dev-C++, developed by Bloodshed Software, is a fully featured graphical IDE (Integrated Development
Environment), which is able to create Windows or console-based C/C++ programs using the MinGW
compiler system. MinGW (Minimalist GNU* for Windows) uses GCC (the GNU g++ compiler
collection), which is essentially the same compiler system that is in Cygwin (the unix environment
program for Windows) and most versions of Linux. There are, however, differences between Cygwin and
MinGW; link to Differences between Cygwin and MinGW for more information.

Getting Dev-C++
The author has released Dev-C++ as free software (under GPL).
Link to Bloodshed Dev-C++ for a list of Dev-C++ download sites.
You should let the installer put Dev-C++ in the default directory of C:\Dev-Cpp, as it will make it easier
to later install add-ons or upgrades.

Using Dev-C++
Step 1: Configure Dev-C++.
We need to modify one of the default settings to allow you to use the debugger with your programs.
Go to the "Tools" menu and select "Compiler Options".
In the "Settings" tab, click on "Linker" in the left panel, and change "Generate
debugging information" to "Yes":

Click "OK".

Step 1b (ONLY for those who use Windows VISTA).


Again, go to the "Tools" menu and select "Compiler Options".
In the "Programs" tab, change "gcc.exe" to "g++.exe".

Step 2: Create a new project.


A "project" can be considered as a container that is used to store all the elements that are required to
compile a program.
Go to the "File" menu and select "New", "Project...".
Choose "Empty Project" and make sure "C project" is selected.
Here you will also give your project a name. You can give your project any valid filename, but
keep in mind that the name of your project will also be the name of your final executable.
Once you have entered a name for your project, click "OK".
Dev-C++ will now ask you where to save your project.

Step 3: Create/add source file(s).


You can add empty source files one of two ways:
Go to the "File" menu and select "New Source File" (or just press CTRL+N) OR
Go to the "Project" menu and select "New File".
Note that Dev-C++ will not ask for a filename for any new source file until you attempt to:
1. Compile
2. Save the project
3. Save the source file
4. Exit Dev-C++
You can add pre-existing source files one of two ways:

Go to the "Project" menu and select "Add to Project" OR


Right-click on the project name in the left-hand panel and select "Add to Project".
EXAMPLE: Multiple source files

In this example, more than 3 files are required to compile the program; The "driver.cpp" file references "Deque.h"
(which requires "Deque.cpp") and "Deque.cpp" references "Queue.h" (which requires "Queue.cpp").

Step 4: Compile.
Once you have entered all of your source code, you are ready to compile.
Go to the "Execute" menu and select "Compile" (orxcx just press CTRL+F9).
It is likely that you will get some kind of compiler or linker error the first time you attempt to
compile a project. Syntax errors will be displayed in the "Compiler" tab at the bottom of the
screen. You can double-click on any error to take you to the place in the source code where it
occurred. The "Linker" tab will flash if there are any linker errors. Linker errors are generally
the result of syntax errors not allowing one of the files to compile.
Once your project successfully compiles, the "Compile Progress" dialog box will have a status of
"Done". At this point, you may click "Close".

Step 5: Execute.
You can now run your program.
Go to the "Execute" menu, choose "Run".
Note: to pass command-line parameters to your program, go to the "Execute" menu, choose
"Parameters" and type in any paramaters you wish to pass.
Disappearing windows
If you execute your program (with or without parameters), you may notice something peculiar; a console
window will pop up, flash some text and disappear. The problem is that, if directly executed, console
program windows close after the program exits. You can solve this problem as follows:
Add the following line at the beginning of your code:
#include <stdlib.h>
and the following line at the end of your source code, just before the closing } parenthesis:
system("PAUSE");

Step 6: Debug.
When things aren't happening the way you planned, a source-level debugger can be a great tool in
determining what really is going on. Dev-C++'s basic debugger functions are controlled via the
"Debug" tab at the bottom of the screen; more advanced functions are available in the "Debug"
menu.
Using the debugger:
The various features of the debugger are pretty obvious. Click the "Run to cursor" icon to run
your program and pause at the current source code cursor location; Click "Next Step" to step
through the code; Click "Add Watch" to monitor variables.
Setting breakpoints is as easy as clicking in the black space next to the line in the source code.
See the Dev-C++ help topic "Debugging Your Program" for more information.

You might also like