Scribd
Upload
262 views22 pages

Design of Mechanically Stabilzed Earth Walls (Msew)

This document discusses the design of mechanically stabilized earth walls (MSEW). It covers advantages like increased tensile strength from soil reinforcement and shear resistance from soil-reinforcement friction. Corrosion over the life span of the structure must also be considered in design. Uses of geotextiles include drainage, filtration, separation, and reinforcement of soil. Geogrid reinforcement design considers satisfying internal stability requirements and checking external stability of the wall. Metallic strip reinforcement design involves determining wall properties, soil-tie properties, and calculating tie forces and sizes at different levels to resist breakout for an economical design. External stability checks consider safety factors.

Uploaded by

SUNDARAVEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
262 views22 pages

Design of Mechanically Stabilzed Earth Walls (Msew)

This document discusses the design of mechanically stabilized earth walls (MSEW). It covers advantages like increased tensile strength from soil reinforcement and shear resistance from soil-reinforcement friction. Corrosion over the life span of the structure must also be considered in design. Uses of geotextiles include drainage, filtration, separation, and reinforcement of soil. Geogrid reinforcement design considers satisfying internal stability requirements and checking external stability of the wall. Metallic strip reinforcement design involves determining wall properties, soil-tie properties, and calculating tie forces and sizes at different levels to resist breakout for an economical design. External stability checks consider safety factors.

Uploaded by

SUNDARAVEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 22

DESIGN OF MECHANICALLY

STABILZED EARTH WALLS (MSEW)

Advantages
(a) the soils increased tensile
strength
(b) the shear resistance developed
from the friction at the soilreinforcement interfaces.
Corrosion
tc = tdesign + r (life span of structure)

Uses of Geotextiles
1.Drainage: The fabrics can rapidly channel water from soil to various
outlets, thereby providing a higher soil shear strength and hence stability.
2. Filtration: When placed between two soil layers, one coarse grained
and the other fine grained, the fabric allows free seepage of water from
one layer to the other. However, it protects the fine-grained soil from
being washed into the coarse-grained soil.
3. Separation: Geotextiles help keep various soil layers separate after
construction and during the projected service period of the structure. For
example, in the construction of highways, a clayey subgrade can be kept
separate from a granular base course.
4. Reinforcement: The tensile strength of geofabrics increases the loadbearing capacity of the soil.

The major function of geogrids is


reinforcement.
The highest efficiency occurs when
BGG >3.5D50
Design Considerations

1. Satisfying internal stability


requirements
2. Checking the external stability of
the wall

External Stability Checks

Metallic Strip
Reinforcement
General
1. Determine the height of the wall, H, and the properties of
the granular backfill material
2. Obtain the soiltie friction angle, and the required value
of FSB and FSP.
Internal Stability
Step 3. Assume values for horizontal and vertical tie
spacing. Also, assume the width of reinforcing strip, w, to be
used.
Step 4. Calculate the active earth pressure.
Step 5. Calculate the tie forces at various levels.
Step 6. For the known values of FSB calculate the thickness
of ties, t, required to resist the tie breakout

The convention is to keep the


magnitude of t the same at all levels, so
take maximum active earth pressure.
Step 7. For the known values of and
FSP determine the length L of the ties at
various levels.
Step 8. The magnitudes of SV , SH , t, w
and L may be changed to obtain the
most economical design.

External Stability

FSOT=3, FSS=3 & FSBCF=3-5


FSB =2.5-3 & FSP=1.3-1.5

Geotextiles
1. Calculate the active
earth pressure.

The recommended values of the


reduction factor are as follows
(Koerner, 2005)
RFid 1.12.0
RFcr 24
RFcbd 11.5

Geogrid
1. Calculate the active earth pressure.

Gravel, sandy gravel 0.750.8


Well graded sand, gravelly sand 0.7
0.75
Fine sand, silty sand 0.550.6

You might also like