Scribd
Upload
43 views

Simulation File - Network Editor - Cross Section Editor - Boundary Conditions - Hydrodynamic Parameters

This document provides an introduction to MIKE 11 and describes its key components. It explains that MIKE 11 uses a simulation file to control parameters and start simulations. It also uses network, cross section, boundary condition, and hydrodynamic parameter files. The network file is used to digitize the river network and define structures and inflow points. The cross section file contains raw and processed cross section data. The boundary condition file defines conditions at the model boundaries. The hydrodynamic parameter file contains initial conditions, bed resistance, the wave approximation method, and default values.

Uploaded by

Emil Salim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
43 views

Simulation File - Network Editor - Cross Section Editor - Boundary Conditions - Hydrodynamic Parameters

This document provides an introduction to MIKE 11 and describes its key components. It explains that MIKE 11 uses a simulation file to control parameters and start simulations. It also uses network, cross section, boundary condition, and hydrodynamic parameter files. The network file is used to digitize the river network and define structures and inflow points. The cross section file contains raw and processed cross section data. The boundary condition file defines conditions at the model boundaries. The hydrodynamic parameter file contains initial conditions, bed resistance, the wave approximation method, and default values.

Uploaded by

Emil Salim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 9

Introduction to MIKE 11

Part 2

Simulation File
Network Editor
Cross Section Editor
Boundary Conditions
Hydrodynamic Parameters

November 2002

Part 2

MIKE 11 Introduction

Simulation File (*.sim11)

Simulation Control
Parameters
Start Simulation
Edit Mike11 Input
Files

November 2002

Part 2

MIKE 11 Introduction

Network File (*.nwk11)


Digitise River Network
Define Hydraulic Structures
Define Catchment Inflow Points (RainfallRunoff Models)

November 2002

Part 2

MIKE 11 Introduction

Network File (*.nwk11)


Points and Branches

November 2002

Part 2

MIKE 11 Introduction

Network File (*.nwk11)


Grid Points
Information on
Computational
Grid

November 2002

Part 2

MIKE 11 Introduction

Cross Section File (*.xns11)

Raw Data
Processed Data

November 2002

Part 2

MIKE 11 Introduction

Boundary Conditions (*.bnd11)

November 2002

Part 2

MIKE 11 Introduction

Hydrodynamic Parameters (*.hd11)

November 2002

Part 2

Initial Conditions
Bed Resistance
Wave Approximation
Default Values

MIKE 11 Introduction

Hydrodynamic Default Values (*.hd11)

November 2002

Part 2

MIKE 11 Introduction

You might also like