0% found this document useful (0 votes)
549 views2 pages

Examination Room Guide Using RFID For The Jumbling System Based EXAMS

This project aims to guide students to their examination rooms using RFID. Each student will be issued an RFID card containing their hall ticket number. When they arrive at the college, they will scan their card at an RFID reader, which will display their examination room number on an LCD screen. The system uses an AT89S52 microcontroller programmed in Embedded C to read RFID cards and show room assignments, helping to reduce time spent searching for rooms in large examination centers.

Uploaded by

RambhupalReddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
549 views2 pages

Examination Room Guide Using RFID For The Jumbling System Based EXAMS

This project aims to guide students to their examination rooms using RFID. Each student will be issued an RFID card containing their hall ticket number. When they arrive at the college, they will scan their card at an RFID reader, which will display their examination room number on an LCD screen. The system uses an AT89S52 microcontroller programmed in Embedded C to read RFID cards and show room assignments, helping to reduce time spent searching for rooms in large examination centers.

Uploaded by

RambhupalReddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Examination room guide using RFID for the jumbling system

based EXAMS
ABSTRACT
Aim: aim of this project is guiding the student at the examination centers.
Description :
Now a days 99% of the exams are held JUMBLING system. In this process so
many students facing problems in searching rooms. Our project is helpful in this cases.
Each and every student will be issued an RFID card as their hall ticket. While they
reaching the college premises and by showing their hall ticket to the RFID reader. That
will automatically displays the room number of that person. Our project will mainly saves
the time in searching for the room in examination centers.
The system uses a compact circuitry build around flash version of AT89S52
microcontroller with a non volatile memory. Programs are developed using Embedded C,
compiled using RIDE tool. ISP is used to dump the code into microcontroller.
SOFTWARE

: Embedded C

TOOLS

: RIDE/KEIL to write code, ISP to burn the chip.

TARGET DEVICE : At89s52 based our own developed board.


ADVANTAGES

: Low cost, automated operation, Low Power consumption.

REFERENCES
1. The 8051 micro controller and embedded systems by Mazidi.
2. www.wikipedia.org
3. www.atmel.com
4. www.8051projects.com
5. Embedded systems with 8051 by kenith j ayala

BLOCK DIAGRAM :
RFID
reader

Max232

MICROCONTROLLER

AT89S52
RPS

LCD
Crystal

Hardware : AT89s52
RFID reader
Max232
LCD

You might also like