Yoke Brochure Issue 1
Yoke Brochure Issue 1
Yoke Brochure Issue 1
INTRODUCTION
ADVANTAGES
+ AC Magnetic Field
SPECIFICATION
Compliance: BS EN ISO 9934-3:2002 & ASTM E1444 / E1444-11
20mm x 20mm
Cross Sectional Dimensions of the poles
Recommended pole spacings
165mm
Maximum (Smax)
60mm
Minimum (Smin)
Tangential field strength, H1
typically 2.5kA/m
At Smax
typically 7.4kA/m
At Smin
Electrical supply:
220VAC or 110VAC
Voltage
575watts
Power
50/60 Hz
Frequency
4 metres
Cable length (plug not fitted)
Sinusoidal
Current wave forms available
AC mains
Method of current control
>25%
Duty cycle at maximum output
30 seconds
Maximum current ON time
200mm x 155mm x 50mm
Overall dimensions
2.2 Kg (4.85 lbs)
Weight
IP52
Ingress Protection Code
For reference the minimum requirements of EN ISO 9934-3(E) are:
Duty cycle
Current ON time
Surface temperature of handle
Tangential field strength at Smax
Lifting force
>10%
>5 seconds
<40oC
>2kA/m (rms)
>44 N
exceeds
exceeds
compiles
exceeds
compiles
We also have available a 42 Volt Inspection Yoke. Please email [email protected] for further details.
AGENT / DISTRIBUTOR