0% found this document useful (0 votes)
94 views

Topic: Compressor: Tutorial 2

1. A single-stage, single-acting air compressor compresses air from 1.013 bar and 25°C to 7 bar. The bore is 120mm, stroke is 150mm, and it runs at 250 rpm. With a 5% clearance volume and 85% mechanical efficiency, determine the volumetric efficiency, power, and mass of air delivered per minute. 2. A two-stage, single-acting air compressor compresses air from 1 bar and 20°C to 15 bar after intercooling to 25°C. Calculate the minimum power required at 400 rpm if compression follows PV1.25=C. 3. A single-stage, single-acting air compressor compresses air from

Uploaded by

atulsemilo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
94 views

Topic: Compressor: Tutorial 2

1. A single-stage, single-acting air compressor compresses air from 1.013 bar and 25°C to 7 bar. The bore is 120mm, stroke is 150mm, and it runs at 250 rpm. With a 5% clearance volume and 85% mechanical efficiency, determine the volumetric efficiency, power, and mass of air delivered per minute. 2. A two-stage, single-acting air compressor compresses air from 1 bar and 20°C to 15 bar after intercooling to 25°C. Calculate the minimum power required at 400 rpm if compression follows PV1.25=C. 3. A single-stage, single-acting air compressor compresses air from

Uploaded by

atulsemilo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tutorial 2

Topic : Compressor

1. A single stage single acting air compressor is used to compress air from 1.013 bar and 25 C
to 7 bar according to law PV1.3 = C.The bore and stroke of a cylinder are 120mm and 150mm
respectively. The compressor runs at 250 rpm .If clearance volume of the cylinder is 5% of
stroke volume and the mechanical efficiency of the compressor is 85%, determine volumetric
efficiency, power, and mass of air delivered per minute.

2. A two stage singe acting air compressor compresses 2m3 air from 1 bar and 20 C to 15 bar.
The air from the low pressure compressor is cooled to 25 C in the intercooler. Calculate the
minimum power required to run the compressor if the compression follows PV1.25=C and the
compressor runs at 400 rpm.

3. A single stage single acting air compressor is used to compress air from 1 bar and 22 C to 6
bar according to the law PV1.25 = C. The compressor runs at 125 rpm and the ratio of stroke
length to bore of a cylinder is 1.5. If the power required by the compressor is 20 Kw, determine
the size of the cylinder

You might also like