This document provides a load study calculation for a water treatment plant (05-WTP). It includes the connected load details, equations used, generator and transformer sizing, cable selection, circuit breaker sizing, and voltage drop calculations. The total demand load is 349.86 KVA and the emergency load is 293.61 KVA. Based on the calculations, a 400 KVA generator and 500 KVA transformer are selected. Cable sizes, circuit breakers, and expected voltage drops are also determined for 12 load circuits.
This document provides a load study calculation for a water treatment plant (05-WTP). It includes the connected load details, equations used, generator and transformer sizing, cable selection, circuit breaker sizing, and voltage drop calculations. The total demand load is 349.86 KVA and the emergency load is 293.61 KVA. Based on the calculations, a 400 KVA generator and 500 KVA transformer are selected. Cable sizes, circuit breakers, and expected voltage drops are also determined for 12 load circuits.
This document provides a load study calculation for a water treatment plant (05-WTP). It includes the connected load details, equations used, generator and transformer sizing, cable selection, circuit breaker sizing, and voltage drop calculations. The total demand load is 349.86 KVA and the emergency load is 293.61 KVA. Based on the calculations, a 400 KVA generator and 500 KVA transformer are selected. Cable sizes, circuit breakers, and expected voltage drops are also determined for 12 load circuits.
This document provides a load study calculation for a water treatment plant (05-WTP). It includes the connected load details, equations used, generator and transformer sizing, cable selection, circuit breaker sizing, and voltage drop calculations. The total demand load is 349.86 KVA and the emergency load is 293.61 KVA. Based on the calculations, a 400 KVA generator and 500 KVA transformer are selected. Cable sizes, circuit breakers, and expected voltage drops are also determined for 12 load circuits.
SUBJECT: Calculation of Load & Load Study of (05-WTP)
MDB (WATER TREATMENT PLANT STATION): Source of Feeding: 1. 2(3CX300m+ 1X150mmG) PVC , 0.6/1.2 KV FEEDER FROM SEC KWHM BOX 2. ONE GENERATOR 400KVA Connected load: 1. FIRE PUMP 45KW. 2. TRANSFORMER BUILDING PANEL EPPIB06 6.31KVA (REFER TO 05-IB06-EE-101). 3. WATER PUMP ROOM PANEL EPPIB02 13.13KVA (REFER TO 05-IB02-EE-101). 4. GUARD ROOM PANEL EPPIB08 8.83KVA (REFER TO 05-IB08-EE-101). 5. ADMINSTRATION BUILDING PANEL EPPIB12 8.07KVA (REFER TO 05-IB12-EE-101). 6. MCC-WTP02-05 PANEL 168.5KVA. 7. GENERATOR ROOM PANEL EPPIB11 18.65KVA (REFER TO 05-IB11-EE-101). 8. DRAINAGE PUMP ROOM EPPIB17 7.14KVA (REFER TO 05-IB17-EE-101). 9. R.O BUILDING PANEL EPPIB14 35.48KVA (REFER TO 05-IB14-EE-101). 10. MCC-WTP01-05 PANEL 25KVA. All Equations: Equation S Ge =3IV. 1. Equation S motor =3IV. 2. Equation Rating current of cables = If / D.F. 3. Equation Rating current of C.B. = If 1.25 . 4. Equation Single phase voltage drop = 2 x I x L x VD(mV/A/m) / 1000 5. Equation Three phase voltage drop = I x L x VD (mV/A/m) / 1000 6. Symbols :
