Scribd
Upload
96 views12 pages

Solar Matlab

This document introduces a MATLAB program called "solar0" for performing solar engineering calculations. It has a main menu with 6 options: Edit, Radiation, Time, Angle, Terrestrial, and Misc. The Edit option allows the user to input the date and latitude. The Radiation, Time, Angle options perform calculations related to solar irradiance, position, and sun-surface angles. The Terrestrial option calculates total and diffuse radiation ratios. The user needs to download the "solar0.zip" file containing the MATLAB source code files to run the program.

Uploaded by

GokulSubramanian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views12 pages

Solar Matlab

This document introduces a MATLAB program called "solar0" for performing solar engineering calculations. It has a main menu with 6 options: Edit, Radiation, Time, Angle, Terrestrial, and Misc. The Edit option allows the user to input the date and latitude. The Radiation, Time, Angle options perform calculations related to solar irradiance, position, and sun-surface angles. The Terrestrial option calculates total and diffuse radiation ratios. The user needs to download the "solar0.zip" file containing the MATLAB source code files to run the program.

Uploaded by

GokulSubramanian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Introduction of MATLAB program for Solar Engineering Fundamentals

Wei Fang, Ph.D., Professor


Dept. of Bio-Industrial Mechatronics Engineering
National Taiwan University, ROC
1. Program execution
Enter solar0 in the command window to execute the program.

A window with 6 options in the main menu will pop up from the monitor as shown
below. The 6 options are: Edit, Radiation, Time, Angle, Terrestrial and Misc..

2. Main menu
2.1. Edit
The first option provides Edit function, allows users to set the date and latitude
for further calculation. Users can enter a value between 1 to 365 for the cell
following Julian day and enter the latitude for the location of interest. The
program will calculate the corresponding calendar day and displayed as shown in
the figure. The information of the latitude will be discussed further in section
2.5.1.

2.2. Radiation

2.2.1. ET Radiation

2.2.2. ET Solar Irradiance

2.2.3. ET daily insolation on horizontal surface

2.2.4. ET Solar fraction

2.2.5 Unit Conversion

2.3. Time

2.3.1. Solar declination

2.3.2. Equation of Time

2.3.3. The Analemma

2.3.4. Animated Analemma

2.3.5 Analemma Photo

2.4. Angle

2.4.1. Sunrise/Sunset hour

2.4.2. Sun-Surface Angle 1

2.4.3. Sun-Surface Angle 2

2.4.4. Solar altitude vs. azimuth angle

2.4.5. Top view of suns track

2.4.6. Side view of suns track

2.4.7. Global view of suns track

2.5. Terrestrial

2.5.1. ET total radiation ratio (rt) on horizontal surface

2.5.2. ET diffuse radiation ratio (rd) on horizontal surface

2.6. Misc.

3. Source code
Please download solar0.zip file from the internet. The zip file contains 3
MATLAB program files, including solar0.m, analemma.mand Sc_cal.m, and a
default data file, entitled solar.txt.

You might also like