Scribd
Upload
222 views

Technical Data: Steelcord Conveyor Belts

This document provides technical specifications for a steelcord conveyor belt with the following key details: - The belt has dimensions of 1600mm width and 1400mm thickness. It has 6mm thick top and bottom rubber covers. - The tension member consists of 90 steel cords with a diameter of 7x7mm spaced at 15mm intervals. The steel cords have a minimum breaking strength of 26.4kN. - The rubber compound used has a specific density of 1.11g/cm3 with a minimum tensile strength of 24N/mm2 and elongation at break of 450%. - Splice details include an overlap length of 1170mm with a single step.

Uploaded by

Venkatesha Hebbar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

Technical Data: Steelcord Conveyor Belts

This document provides technical specifications for a steelcord conveyor belt with the following key details: - The belt has dimensions of 1600mm width and 1400mm thickness. It has 6mm thick top and bottom rubber covers. - The tension member consists of 90 steel cords with a diameter of 7x7mm spaced at 15mm intervals. The steel cords have a minimum breaking strength of 26.4kN. - The rubber compound used has a specific density of 1.11g/cm3 with a minimum tensile strength of 24N/mm2 and elongation at break of 450%. - Splice details include an overlap length of 1170mm with a single step.

Uploaded by

Venkatesha Hebbar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PHOENIX CONVEYOR BELT INDIA (P) LIMITED

Date:-

Technical Data

14/01/2013

Steelcord Conveyor belts

Bonding Rubber

Top Cover

Steel cables

s2
s1
s3
k

Bottom
Cover

Type - 1400mm, ST 1600, 6 + 6, Grade- M

Designation
Dimensions
of belt

Tension
Member

Rubber of
belt covers

Bonding
layer
Splice

Nominal Belt Strength


Width
B
Thickness of belt
s1
Thickness of top cover
s2
Thickness of bottom cover
s3
Weight
Number of cords
Cord Pitch
t
Diameter of Steel Cord
d
Cord Construction
Corrosive Protection
Breaking Strength of Steelcord
Grade of rubber compound
specific density
Tensile strength (min)
Elongation at break (min)
Abrasion (max)
Hardness
Separation strength
Peeling Resistance (min.)
Cord pullout Strength (mm)
Splice length
No of step
Total Overlap Length

Dimension
1600
1400
~17,2
6
6
~35,81
90
15
5,2
7x7
Zn
min. 26.4
M
1.11
24
450
125
65 5
12
115
750
1
1170

N/mm
mm
mm
mm
mm
kg/m
mm
mm
kN
g/cm
N/mm
%
mm
Shore A
N/mm
N/mm
mm
mm

acc.
DIN
22131
22131
22131
22131
22131
22131
22131
22131

22131
22131
53505
53504
53504
53504
53505
22131
22131
22131
22131
22131

You might also like