Scribd
Upload
100 views

Examples

consider a steam power plant operating on a simple ideal ranking cycle and has a net power output of 80 MW . steam enters the high -pressure turbine at 10 MPa and 500 C and the low-pressure turbine at 1 MPa and 500 C . steam leaves the condenser as saturated liquid at a pressure of 10 kPa . the isentropic efficiency of the turbine is 80%, and that of the pump is 95%. show the cycle on T-s diagram with respect to saturation lines , and determine .

Uploaded by

Swordhamza Kyat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100 views

Examples

consider a steam power plant operating on a simple ideal ranking cycle and has a net power output of 80 MW . steam enters the high -pressure turbine at 10 MPa and 500 C and the low-pressure turbine at 1 MPa and 500 C . steam leaves the condenser as saturated liquid at a pressure of 10 kPa . the isentropic efficiency of the turbine is 80%, and that of the pump is 95%. show the cycle on T-s diagram with respect to saturation lines , and determine .

Uploaded by

Swordhamza Kyat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Example 1.

consider a steam power plant operating on a simple ideal ranking cycle . steam
enters the turbine at 3 Mpa and 350 C and is then condensed at a pressure of 75
KPa . Determine the thermal efficiency of this cycle .
Example 2.
consider a steam power plant operating on a simple ideal ranking cycle and has a
net power output of 80 MW . steam enters the high -pressure turbine at 10 MPa and
500 C and the low-pressure turbine at 1 MPa and 500 C . steam leaves the
condenser as saturated liquid at a pressure of 10 kPa . the isentropic efficiency of
the turbine is 80%, and that of the pump is 95%. show the cycle on T-s diagram with
respect to saturation lines , and determine .

You might also like