Scribd
Upload
17 views4 pages

Arabic Alphabet Magnets

The document provides instructions for making Arabic letter magnets. It lists the necessary supplies which include round magnets, glass marbles, glue, and printed Arabic letter templates. The instructions are in 5 steps: 1) Print the letter templates, 2) Cut out the individual letters, 3) Glue the letters to the marbles, 4) Glue magnets to the back of the letters, and 5) Let dry before using on the fridge. Pictures show examples of the finished magnets with individual Arabic letters.

Uploaded by

Saad Memon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views4 pages

Arabic Alphabet Magnets

The document provides instructions for making Arabic letter magnets. It lists the necessary supplies which include round magnets, glass marbles, glue, and printed Arabic letter templates. The instructions are in 5 steps: 1) Print the letter templates, 2) Cut out the individual letters, 3) Glue the letters to the marbles, 4) Glue magnets to the back of the letters, and 5) Let dry before using on the fridge. Pictures show examples of the finished magnets with individual Arabic letters.

Uploaded by

Saad Memon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Arabic Letter Magnets

What Youll Need:


Everything you need is at your local craft store (I actually purchased some from the local dollar store)

inch round magnets - you can get 50 for about $5.00-$7.00


glass accent marbles with one side flat look in the floral section
Glue that dries on clear (even Elmers glue will work I used tacky glue
Print off the sheets of Arabic letters
Scissors

Step One:
Print off the Arabic letter template sheets. I printed mine off on regular paper, but you could use cardstock.
Step Two:
Cut each letter with your scissors to fit the magnet. I first cut out around each letter and then I took each one and cut it
to fit the marbles.
Step Three:
Next, take your glue, using a drop the size of a pencil eraser or a little less; glue your image to the marble. Be careful
not to use too much or the letter will slide all over the place!
Step Four:
After the glue dries, put a drop of glue, the same size as before, in the middle of the back of the letter. Then press
down the magnet onto the back of the letter.
Step Five:
Let it dry for about an hour before you put it on the fridge. You dont want it sliding off and ruining everything!

2005-2011, Yemenlinks.com

Heres what the magnets will look like.


(right now I do not have the magnets glued on).

There is a glare from the camera but you can see


these letters clearly on the magnets.

2005-2011, Yemenlinks.com

2005-2011, Yemenlinks.com

2005-2011, Yemenlinks.com

You might also like