Scribd
Upload
29 views

College of Engineering Trivandrum Second Series Test October-2013

This document provides a test on control systems with two parts. Part A consists of short answer questions about unity feedback systems, Bode plots, non-minimum phase systems, and stability criteria. Part B requires solving longer problems related to steady state error, Routh stability criterion, Bode plots, and root locus analysis. The test covers key concepts in control systems including characteristics of open and closed loop systems, stability analysis techniques, and time and frequency response analysis.

Uploaded by

anu
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
29 views

College of Engineering Trivandrum Second Series Test October-2013

This document provides a test on control systems with two parts. Part A consists of short answer questions about unity feedback systems, Bode plots, non-minimum phase systems, and stability criteria. Part B requires solving longer problems related to steady state error, Routh stability criterion, Bode plots, and root locus analysis. The test covers key concepts in control systems including characteristics of open and closed loop systems, stability analysis techniques, and time and frequency response analysis.

Uploaded by

anu
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

COLLEGE OF ENGINEERING TRIVANDRUM

SECOND SERIES TEST OCTOBER-2013


CONTROL SYSTEMS [08.701]
Max. Marks: 50

Part-A
1. A unity feedback system is characterized by an open loop transfer
function G(s)=__________
K
.Determine the gain K, so that the
s (s + 10)
system will have a damping ratio of 0.5. For this value of K
determine the settling time.
2. Explain Bode-plot with transportation lag.
3. Explain Non-minimum phase systems.
4. Explain the effect of addition of poles and zeros on Root locus.
5. Explain Nyquist Stability criterion.
(5*4=20)
Part-B
(Answer any three questions)
6. The open loop transfer function of servo system with unity
feedback is G(s)= ___________
10
.Evaluate the static error
s(0.1s +1)
constants of the system. Obtain the steady state error of the system,
when subjected to an input given by the polynomial.
r(t)= a0 + a1t + 0.5a2t2
7. By Rouths stability criterion determine the stability of the
system with characteristic equation
9s5-20s4+10s3-s2-9s-10 = 0
8. Plot the Bode diagram for the following transfer function
and obtain the gain and phase crossover frequencies.
G(s) =____________________
10
s(1 +0.4s)(1+0.1s)
9. Sketch the root locus of the system whose open loop transfer
function is G(s)= _______________
K
Find the value of K sothat
s( s + 2 )( s + 4 )
damping ratio of the closed loop system is 0.5

(3*10=30)

You might also like