Scribd
Upload
41 views1 page

Heat Treatment Layout

The document provides specifications for installing a diesel firing burner and supply line, noting that a minimum gap of 75mm is required between the burner and any boundary wall, the diesel pipe has a diameter of 323mm, and there must be a minimum clearance of 150mm from the burner to any plate, for a total minimum clearance from the boundary wall of 550mm.

Uploaded by

Santanu Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views1 page

Heat Treatment Layout

The document provides specifications for installing a diesel firing burner and supply line, noting that a minimum gap of 75mm is required between the burner and any boundary wall, the diesel pipe has a diameter of 323mm, and there must be a minimum clearance of 150mm from the burner to any plate, for a total minimum clearance from the boundary wall of 550mm.

Uploaded by

Santanu Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIESEL FIRING BURNER AND SUPPLY LINE

GAP OF MIN 75MM REQD.

DIESEL PIPE DIAMETER 323MM

Minimum Clearance of
150mm required from plate
to burner

Furnace boundary wall.

NOTE: TOTAL MINIMUM CLEARANCE OF 75+323+150= 550MM IS REQUIRED FROM BOUNDARY WALL

You might also like