Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Etdsmadat Engl

    Uploaded by

    Nicusor Miertescu
    This document provides technical specifications for a gas detector: - It is an E-TD-S1/M gas detector that is ATEX certified for use in explosive environments and detects combustible gases and vapors. - It has a semiconductor sensor that measures gas concentration on a 0-100% LEL scale and outputs a resistance signal proportional to concentration. - The detector works between -20-50°C, has an IP54 rating, 5V power supply, and connects via a 4-wire cable with 0.5-2.5mm2 wire cross-section.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Etdsmadat Engl

    Uploaded by

    Nicusor Miertescu
    24 views1 page
    This document provides technical specifications for a gas detector: - It is an E-TD-S1/M gas detector that is ATEX certified for use in explosive environments and detects combustible gases and vapors. - It has a semiconductor sensor that measures gas concentration on a 0-100% LEL scale and outputs a resistance signal proportional to concentration. - The detector works between -20-50°C, has an IP54 rating, 5V power supply, and connects via a 4-wire cable with 0.5-2.5mm2 wire cross-section.

    Original Description:

    technical file

    Original Title

    etdsmadatEngl

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for a gas detector: - It is an E-TD-S1/M gas detector that is ATEX certified for use in explosive environments and detects combustible gases and vapors. - It has a semiconductor sensor that measures gas concentration on a 0-100% LEL scale and outputs a resistance signal proportional to concentration. - The detector works between -20-50°C, has an IP54 rating, 5V power supply, and connects via a 4-wire cable with 0.5-2.5mm2 wire cross-section.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views1 page

    Etdsmadat Engl

    Uploaded by

    Nicusor Miertescu
    This document provides technical specifications for a gas detector: - It is an E-TD-S1/M gas detector that is ATEX certified for use in explosive environments and detects combustible gases and vapors. - It has a semiconductor sensor that measures gas concentration on a 0-100% LEL scale and outputs a resistance signal proportional to concentration. - The detector works between -20-50°C, has an IP54 rating, 5V power supply, and connects via a 4-wire cable with 0.5-2.5mm2 wire cross-section.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    E-TD-S1/M

    GAS DETECTOR
    TECHNICAL DATA SHEET

    FEATURES
    Type:
    Protection marking:

    E-TD-S1/M
    II 2G Ex de IIB+H2 T5

    -20 +50C
    Ambient temperature:
    Air pressure:
    900 1100hPa
    Humidity:
    15 90RH%
    IP54
    Ingress protection{MSZ EN 60529:2001}:
    Built-in detector:
    Measuring range:
    Output electric signal:

    Detects combustible gases and


    vapours

    ATEX certified Ex protection

    Semiconductor sensor

    %VOL measuring range

    TD-S1
    0 100 LEL%
    concentration dependent resistance

    Characteristic operational velocity:


    Material:
    Type of detector:
    hidrogen
    TGS-813
    methane
    TGS-842
    propane-buthane
    TGS-842

    t50:
    4s
    5s
    7s

    t90:
    15s
    9s
    11s

    Power supply:
    5V 0,2V DC
    167mA
    Highest nominal current drain:
    Highest nominal power:
    835
    Contact protection {IEC 364-4-41}: FELV
    7 12mm with reducer ring,
    12 17mm without reducer ring
    Number of connecting conductor wires: 4 pcs
    Connectable wire cross-section:
    0,5 2,5mm2 stranded or compact
    Connectable cable diameter:

    Weight {with stand}:

    MSZER AUTOMATIKA KFT.


    H-2040 Budars, Komromi utca 22. Hungary
    telephone: +36 23 365-280, Fax: +36 23 365-837
    web: www.gazerzekelo.hu
    e-mail: [email protected]

    0,9 kg.

    You might also like