This document provides specifications for a piping project involving non-corrosive hydrocarbon service between 120-375°C. It lists approved materials, standards, and components for the system. Carbon steel, stainless steel, and alloy materials are specified depending on service temperature and component type. Dimensions and schedules are provided for pipe sizes 1/2"-36". Flanges, fittings, valves, strainers and other components are also defined along with appropriate material types.
This document provides specifications for a piping project involving non-corrosive hydrocarbon service between 120-375°C. It lists approved materials, standards, and components for the system. Carbon steel, stainless steel, and alloy materials are specified depending on service temperature and component type. Dimensions and schedules are provided for pipe sizes 1/2"-36". Flanges, fittings, valves, strainers and other components are also defined along with appropriate material types.
This document provides specifications for a piping project involving non-corrosive hydrocarbon service between 120-375°C. It lists approved materials, standards, and components for the system. Carbon steel, stainless steel, and alloy materials are specified depending on service temperature and component type. Dimensions and schedules are provided for pipe sizes 1/2"-36". Flanges, fittings, valves, strainers and other components are also defined along with appropriate material types.
This document provides specifications for a piping project involving non-corrosive hydrocarbon service between 120-375°C. It lists approved materials, standards, and components for the system. Carbon steel, stainless steel, and alloy materials are specified depending on service temperature and component type. Dimensions and schedules are provided for pipe sizes 1/2"-36". Flanges, fittings, valves, strainers and other components are also defined along with appropriate material types.
32 C 28 A 193 Gr.B7 / A 194 Gr.2H (ZINC COATING) (1) VS 113 AG A01 - RF 125 Ra
VS 235 AG E24 - SW VS 115 AG B25 - RF125 Ra VD 435 AG 7R1 - SW
VD 313 AG A01 - RF 125 Ra
VDR 713 AG 6C1 - RF 125 Ra (WAFER)
VDR 835 AG 3R1 - SW
VS 235 AG E24 - NPT (3)
STSW
4,78 5,56 6,35 7,14 8,74
T - C ----
SMLS A 105 / 300# - RF125 Ra
FT 935 AG 5R1 - SW
15701
STSW
RTSW
DESIGN CONDITIONS
API 5L Gr.B
GASKETS
14350
WELDING NECK
3/4
FT 913 AG 2C4 - RF 125 Ra
90-45 ELBOWS
14370
CONC.REDUCTIONS
14372
A 234 Gr.WPB A 234 Gr.WPB
ECC.REDUCTIONS
14372
A 234 Gr.WPB
ELLIPT.CAPS
14374
A 234 Gr.WPB
LJ STUB ENDS
14375
PIPE BENDS
15023 METER ELBWS
STEE
15020 15021
STEE
Mark
STEE
INTERSECTIONS
STEE
10
STEE
12
SLET NLET
14
SWLT
RTEE
STEE
Components
Material
STEE STRAIGHT BW TEE
14371
A 234 Gr.WPB
RTEE REDUCTION BW TEE
14371
A 234 Gr.WPB
STSC STRAIGHT THDD TEE
14381
RTSC REDUCTION THDD TEE
14381
STSW STRAIGHT SW TEE
14380
A 105
RTSW REDUCTION SW TEE
14380
A 105
SWLT SWEEPOLETS
15003
A 105
WLET WELDOLETS
15004
30
TLET THREDOLETS
14381
36
SLET SOCKOLETS
14380
A 105
NLET NIPOLETS THDD
14381
A 105
PTOP PIPE TO PIPE
15012
STEE
16
STEE
18
STEE
20 24
STEE STEE
1/2 3/4 1 1 2
1 mm
A 105
1/2
F G
CORR.ALLOWANCE
15016
SPECIAL USE
0 0 2
Date
RED. THDD FLG.S
" Y " STRAINERS
T U B
20368.PIP.MEC.FUN
MANIFACTURE
M E C
WELDING AND HEAT TREATMENT
NOMINAL SIZE
M O D
COMPONENTS
06--97
Rating & Facing
REFERENCE SPECIFICATIONS
Compiled
6 DN"
10
12
14
16
BRANCH SIZE
18
20
24
30
36
NOTES: 1) All carbon steel bolting on flanges, valves & "Y" strainers shall be zinc coating (hot-dip) to ASTM A-153. 3) Threaded Ends and connections are allowed for instrument taps only (15801).
Company's sole property document . Company will protect his right by law.
