Scribd
Upload
23 views

Chapter V - Analysis and Discussion

The document contains 5 tables that provide pipe properties for cold water lines on different floors of a building. Table 5.1 lists properties for pipes on the ground floor, including pipe name, diameter, length, roughness, and demand. Tables 5.2-5.4 similarly list pipe properties for the 2nd through 4th floors. Table 5.5 lists pipe names and demands for the 21st-23rd floors but does not provide other properties. The tables provide data used to analyze the building's cold water distribution system.

Uploaded by

bryesanggalang
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views

Chapter V - Analysis and Discussion

The document contains 5 tables that provide pipe properties for cold water lines on different floors of a building. Table 5.1 lists properties for pipes on the ground floor, including pipe name, diameter, length, roughness, and demand. Tables 5.2-5.4 similarly list pipe properties for the 2nd through 4th floors. Table 5.5 lists pipe names and demands for the 21st-23rd floors but does not provide other properties. The tables provide data used to analyze the building's cold water distribution system.

Uploaded by

bryesanggalang
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CHAPTER V – ANALYSIS AND DISCUSSION

Table 5.1 – Ground Floor Cold Water Lines Pipes Properties

Pipe Diameter Actual Pipe Additional Total Length Demand


Pipe Name Roughness
(mm) length (mm) length (mm) (mm) (m3/min)
101 25 8013.996 0.235
102 25 7133.017 0.235
103 25 15995.82 0.235
104 25 18266.23 0.235
105 25 21654.68 0.424
106 25 23424.02 0.424

Table 5.2 – Second Floor Cold Water Lines Pipes Properties

Pipe Pipe Diameter Actual Pipe length Additional Total Length Demand
Roughness
Name (mm) (mm) length (mm) (mm) (m3/min)
201 25 13427.19 0.424
202 25 10171.41 0.235
203 25 7590.215 0.235
204 25 16220.37 0.235
205 25 18954.44 0.235
206 25 22212.47 0.424
207 25 23171.32 0.424
208 25 14920.66 0.235
209 25 6345.13 0.235
210 25 9725.311 0.235
211 25 14366.07 0.424

Table 5.3 – Third Floor Cold Water Lines Pipes Properties

Pipe Diameter Actual Pipe Additional Total Length Demand


Pipe Name Roughness
(mm) length (mm) length (mm) (mm) (m3/min)
201 25 13427.19 0.424
202 25 10171.41 0.235
203 25 7590.215 0.235
204 25 16450.53 0.235
205 25 19187.43 0.235
206 25 22440.14 0.424
207 25 23398.99 0.424
208 25 18820.8 0.235
209 25 14920.66 0.235
210 25 6345.13 0.235
211 25 9725.311 0.235
212 25 14366.07 0.424

Table 5.4 – Fourth to Twentieth Floor Cold Water Lines Pipes Properties

Pipe Diameter Actual Pipe Additional Total Length Demand


Pipe Name Roughness
(mm) length (mm) length (mm) (mm) (m3/min)
201 25 13427.19 0.424
202 25 10171.41 0.235
203 25 7590.215 0.235
204 25 16450.53 0.235
205 25 19187.43 0.235
206 25 22440.14 0.424
207 25 23398.99 0.424
208 25 18820.8 0.235
209 25 14920.66 0.235
210 25 6345.13 0.235
211 25 9725.311 0.235
212 25 14366.07 0.424

Table 5.5 – Twenty First to Twenty Third Floor Cold Water Lines Pipes Properties

Pipe Diameter Actual Pipe Additional Total Length Demand


Pipe Name Roughness
(mm) length (mm) length (mm) (mm) (m3/min)
201 25 0.424
202 25 0.424
203 25 0.424
204 25 0.424
205 25 0.424
206 25 0.424
207 25 0.424
208 25 0.424

You might also like