Project On Logic Gate (Not Gate)

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Boolean functions may be practically implemented by using electronic gates.

The following points are


important to understand.
Electronic gates require a power supply.
Gate INPUTS are driven by voltages having two nominal values, e.g. 0V and 5V representing
logic 0 and logic 1 respectively.
The OUTPUT of a gate provides two nominal values of voltage only, e.g. 0V and 5V
representing logic 0 and logic 1 respectively. In general, there is only one output to a logic gate
except in some special cases.
There is always a time delay between an input being applied and the output responding.

A large number of electronic circuits (in computers, control units, and so


on) are made up of logic gates. These process signals which represent true
or false.These gates are the AND, OR, NOT, NAND, NOR, EXOR and EXNOR gates.

The NOT gate is an electronic circuit that produces an inverted version of the
input at its output. It is also known as an inverter. If the input variable is A, the inverted output is
known as NOT A. This is also shown as A', or A with a bar over the top, as shown at the outputs.
The diagrams below show two ways that the NAND logic gate can be configured to produce a NOT
gate. It can also be done using NOR logic gates in the same way.

NOT GATE

NOT GATE
A

You might also like