RED DOT SIGHTS

FOR MILITARY &

LAW ENFORCEMENT
PRODUCTS 2015

Why an Aimpoint
Red Dot Sight?
To be successful, shooters must be able to aim accurately
and quickly under a wide variety of conditions. On a shooting
range, there is plenty of time to take aim, but in the real world,
everything is in fast motion. Add rough terrain, foul weather,
poor light and high levels of stress and even the most experienced
marksman will be put to the test.
Military tests have repeatedly proven that the single red dot
reticule is the fastest on target in timed and rapid-fire close
combat exercises, and also provides the greatest increase in hit
probability with moving targets. Other aiming devices require
that the shooters focus leaves the target or create limited
situational awareness. Aimpoint dot sights give you increased
aiming confidence, allow you to remain on target and shoot
with both eyes open, so you are fully aware at all times.

When your life

depends on your
equipment
When the time comes to take the shot, there
should be no question that you can count on your
sight to perform. We believe that a weapon sight
should simplify aiming while meeting the highest
possible requirements for reliability and ruggedness. We know that conditions in the field place
extreme demands on your equipment, so we
design and test Aimpoint products to stand up to
any condition you are likely to encounter. We also
design our products to operate constantly for years
on a single battery so your sight will be ready when
you are. Whether in the field or on the streets, you
can count on Aimpoint red dot sights.

Aimpoint - Global
leader
Aimpoint is the recognized worldwide leader
and originator of red dot sighting technology.
After 40 years of working closely with experienced
marksmen and military weapon experts around
the world, Aimpoint red dot sights remain the
number one choice for combining ruggedness,
speed and accuracy. Aimpoint sights are in service
with most NATO countries, the US Army, US Air
Force, the US Navy, the US Marine Corps, and
numerous other military forces, police agencies,
and special teams worldwide.
Aimpoint red dot sights soldier tested and
combat proven.

All conditions
Anywhere
Aimpoint sights work in all light conditions from darkness to bright desert
sunlight. They are fully submersible
so you never have to worry about rain
or immersion. Aimpoint sights are
developed and tested to be used in
any weather conditions, from the subzero temperatures of the Arctic to the
heat and humidity of the tropics.

User friendliness

On any type of firearm

Environmental awareness

Whether you have a rifle, shotgun,

handgun or crew-served weapon,
Aimpoint has a sight for you.

Aimpoint sights are extremely user

friendly. Operated by a mechanical
switch, an Aimpoint sight can be easily
and quickly changed to the right setting
while simultaneously aiming through
your sight. Our mechanical switch wont
freeze and is easy to use whether you
are wearing gloves or not.
At Aimpoint, we take great pride in
making sure that neither hazardous
nor radioactive materials are used in
our sights.

Standard features on
all Aimpoint sights

Unlimited field of view

Parallax-free
Unlimited eye relief
Unaffected by extreme weather conditions
Extremely rugged, durable construction
No hazardous materials
No laser emission that could be harmful to your eyes
Increased aiming confidence and hit probability
Reduced training time and ammunition consumption
Battery life measured in years

For me, the Aimpoint Micro T-1 is a belief. A belief that Im going to achieve first round lethal
strikes under any conditions, that Im going to out shoot, out perform the bad guy no matter the
environment or situation.
Jeff Gonzales, US Navy SEAL and president at TRICON.

MICRO SERIES SIGHTS

Micro T-1
Dot size
2 or 4 MOA*
Battery life: 50,000 hours**
Battery type: CR2032
Weight:
3.0 oz
Compatible with CEU &
3XMag (see page 15) and all
generation NVDs***
Since its introduction in 2007, the Micro T-1 has become very popular sight worldwide
due to its size, light weight and robust construction. It is in use with special forces, law
enforcement and military units around the world.

Complete and ready to mount

The standard configuration of the Micro T-1 contains the sight, a Picatinny mount and
bikini rubber lens covers. Complete information for this product

Customize your sight

The Micro sights can be customized according to your preferences and needs. Other
mounts and spacers are available to meet the demands of your specific mission and
equipment. See page 19-20. The Aimpoint Micro sights can easily be piggy-backed on
top of larger magnifying scopes.

Micro T-2
Dot size
2 MOA*
Battery life: 50,000 hours**
Battery type: CR2032
Weight:
3.4 oz
Compatible with CEU &
3XMag (see page 15) and all
generation NVDs***
We listened to feedback coming from hard-core customers desiring an even more hard
core Micro sight. With a redesigned and reinforced house body, as well as flip-up covers
protecting the lenses, the Micro T-2 can withstand all types of environmental conditions.
At the same time, we decided to improve upon the optical performance of the sight
which results in a new lens and an important breakthrough in reflective lens coatings. This
makes the Micro T-2 and the 3XMag magnifier a fantastic optical combination.

Complete and ready to mount

The standard configuration of the Micro T-2 contains the sight, a Picatinny mount,
a black front flip cover, a transparent rear flip cover that allows the user to engage a
target with both lens covers closed in an emergency situation.

Complete information for this product

4

MICRO SERIES SIGHTS

AIMPOINT MICRO H-1
Article No
11910 / 200018
Dot size
2 or 4 MOA*
Battery life**A 50,000 hours
Battery type CR2032
Weight
3.0 oz
Weight w mount 3.7 oz
Power Switch Rotary
Mounting
Integrated

Picatinny/Weaver

Since its introduction in 2007, the Micro H-1 has become very popular worldwide due
to its size, light weight and robust build quality.
Complete information for this product
Aimpoint Micro sights are both rugged and versatile. With numerous mounting
options the Micro sights can be deployed on nearly every weapon in your armory.

READY TO GO KITS
The Aimpoint Patrol Rifle Optic and Aimpoint Carbine Optic are perfect for
conditions that demand extreme accuracy and speed. Like all Aimpoint
sights, the PRO and ACO work under all weather conditions and can take the
hard knocks that law enforcement can dish out.

Patrol Rifle Optic (PRO)

Item No
12841
Dot size
2 MOA*
Battery life**A 30,000 hours
Battery type 2L76 or DLI/3N
Weight
7.8 oz**
Weight w mount 11.6 oz
Power Switch Rotary
Mounting
Integrated

Picatinny/Weaver
The PRO sight comes in a ready-to-go kit at a budget friendly price, a concept
that appeals strongly to Law Enforcement units.

Complete and ready to mount

AIMPOINT CARBINE OPTIC (ACO)

The PRO sight contains a QRP2 mount and a standard AR15 spacer which can
be removed. It is also equipped with flip covers, a black front flip cover and a
transparent rear flip cover that allows the user to engage a target with both
lens covers closed in an emergency situation.

Item No
200174
Dot size
2 MOA*
Battery life**A One year
Battery type DL 1/3N
Weight
6.7 oz
Weight w mount 10.6 oz
Power Switch Rotary
Mounting
Integrated

Picatinny rail mount

Customize your sight

Accessories and mounts are available if you want to upgrade your PRO sight.
Complete information for this product

The Aimpoint Carbine Optic is designed specifically for use on AR-15 and M4
carbine style rifles, incorporating proven design features and premium Aimpoint
quality at an affordable price point. With a one-year battery life and 2 MOA
dot, the ACO was is the smart choice for todays modern sporting rifle owner.

Complete and ready to mount

The ACO is ready to mount and shoot directly out of the box. The ACO pairs
a 30mm aluminum alloy sight tube with an extremely rugged fixed height
mount designed to provide absolute co-witness with AR-15 backup iron sights.

Customize your sight

A full selection of branded accessories such as flip-up covers and ARD filters
are available from Aimpoint dealers. Customize your sight to meet your
specific needs. Complete information for this product
6

COMPM4 SERIES SIGHTS

The first Comp sight came out in 1995 and today there are more than 1 million
sights from the Comp series in use worldwide. All Comp sights are soldier-tested
and combat-proven, in other words they are extremely robust high quality products.

COMPM4, COMPM4S
Dot size
2 MOA*
Battery life: 80,000 hours**
Battery type: AA Battery

accepts 1.5-5v
Weight sight and
battery only: 9.45 oz
Weight std
configuration: 13.26 oz
Compatible with CEU & 3XMag
(see page 15) and all
generation NVDs***

Std configuration
The Aimpoint CompM4 series of sights are the toughest sights that Aimpoint
has ever produced and they are the standard infantry soldier sight in many NATO
countries. These optics are extremely rugged and operate continuously for up to
8 years using a single AA battery. The competition is not even close. The Aimpoint
CompM4 is the latest version of the U.S. Armys M68CCO (Close-Combat Optic),
continuing a legacy that Aimpoint has maintained since 1997.
The CompM4 has a top-mounted battery compartment while the CompM4s has a
low battery compartment this is the only difference between the sights.

Complete and ready to mount

The standard configuration of the CompM4 series of sights contains the sight
(CompM4 or CompM4s), a QRP2 mount and a standard AR15 spacer. These sights also
come equipped with a killFlash anti-reflection device and bikini rubber lens covers.

Customize your sight

CompM4 and CompM4s sights can be customized according to your preferences

and needs. Both the standard mount and spacer can be changed to meet the
demands of your specific mission and equipment.
Complete information for COMPM4
Complete information for COMPM4S

3XMAG

The Aimpoint 3XMag magnifying module is a high quality optic that can be used
with any Aimpoint sight for extended range target identification and engagement.
This high quality accessory gives the shooter the best of both worlds: rapid CQB
aiming with an Aimpoint sight, and long range target acquisition in combination
with the magnifier. The Aimpoint TwistMount allows this transition to occur
effortlessly and in just a matter of seconds.

Mechanical Interface

The recommended mount for the 3XMag is the Aimpoint TwistMount, which
allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need
a spacer for co-witnessing with the Aimpoint sight.
The 3XMag can also be attached to aftermarket flip to side mounts.
Complete information about this product

3xmag
Optical System

Magnification:
Eye relief:
Field of view (FOV):
Exit pupil diameter:

Physical Specifications

3X
70 mm
7
7 mm

Dimensions, L x W x H: 110 mm x 44 mm x 41 mm

(4.3 x 1.7 x 1.6)
Weight: 200 g (7.1 oz) including rubber
cover

Environmental Specifications

Temperature range: -45 C to + 70 C, (-50 F - +160 F)

in operation and storage
Water resistance: Submersible to 20 m (67 ft)
8

CEU

The Aimpoint CEU (Concealed Engagement Unit) gives the operator the ability to
observe and/or engage a threat from a concealed or covered position.
The Aimpoint CEU easily rotates from side to side, so an operator can safely look
around either right or left-hand corners, over barricades and under vehicles.
It can also be quickly removed in order to rapidly return to direct engagement.

Mechanical Interface

The Aimpoint CEU rotates a full 260 allowing the operator to safely look around
either right or left-hand corners, up staircases or down tunnels from almost any
angle. To mount the CEU, use the Aimpoint TwistMount base and choose the CEU
ring which allows co-witnessing with the Aimpoint sight.
Complete information about this product

See page 9 for more details about TwistMount and CEU rings.

CEU
Physical Specifications
Dimensions L x W x H:

Weight:

Material housing:

87 mm (3.4) x 115 mm (4.5) x

42 mm (1.7)
135 grams (4.8 oz)
High strength, glass reinforced,
PP polymer, black, non-glare finish

Environmental Specifications

Temperature range, Storage: +45 C to +71 C (-50 F to +160 F)

Temperature Range, Operating: +5 C to +71 C (+41 F to +160 F)

instantaneous
Immersion:
25 m (80 ft.)
Operating Principle:
Dual mirror reflective device for

true target view.
Optical Magnification:
1x, unlimited eye relief.

Mounting solutions

SRP-L
Low Wide Ring, 30 mm
Black. Fits on Picatinny
rail (MIL-STD 1913)
Art. No. 12243 *

CEU High Rise ring

Ring for CEU. Fits on
TwistMount Base.
39 mm height of optical
axis
Art. No. 12203

Ring Base & Top

Base and Top 30 mm
ring. Fits QRP2, LRP
and TNP Mounts
Art. No. 12194 *

QRP3 Mount
Quick Release
Picatinny (MIL-STD
1913) Mount 30 mm
Art. No. 12923*

TwistMount Ring
Separate ring
for TwistMount
Art. No. 12238 *

Spacer
Spacer for Ring Base
& Top and TwistMount
Ring. Raises height of
optical axis from 30 to
39 mm
Art. No. 12227 *

TwistMount
Complete Quick
Release Mount for
3XMag and CEU
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12234 *

TNP Mount
Torsion Nut Picatinny
(MIL-STD 1913) Mount.
For CompM4, PRO and
Ring Base & Top
Art. No. 12197 *

* Screws and Allen key included

CEU Low Rise ring

Ring for CEU. Fits on
TwistMount Base.
30 mm height of
optical axis
Art. No. 12202

TwistMount Base
Separate base for TwistMount Fits on Picatinny
rail (MIL-STD 1913)
Art. No. 12236

QRP2 Mount
Quick Release Picatinny
(MIL-STD 1913) Mount.
For CompM4, PRO and Ring
Base & Top. Return to zero after
dismounting (Spacer is
necessary for M4 flat top
rifles and carbines)
Art. No. 12195 *

QRW2 Mount
Quick Release Weaver Mount
for CompM4, PRO and Ring
Base & Top. Return to zero after
dismounting (Spacer is
necessary for M4 flat top
rifles and carbines)
Art. No. 11758 *

Standard Spacer
Spacer for for CompM4, PRO in
conjunction with Art. No. 12194.
Mount raises height of optical
axis from 30 to 39 mm
Art. No. 12192 *

Extension Spacer
Spacer for CompM4, PRO in
conjunction with Art. No. 12194.
Mount raises height of optical
axis from 30 to 39 mm and
brings sight
40 mm forwards
Art. No. 12193 *

Micro 11 mm Dovetail Mount

Fits most of the 11 mm Dovetail
Bases ranging from 10-12,5 mm
Screws and Micro Tool included
Art. No. 12215

Micro LRP Mount

Lever Release Picatinny Mount
for Micro sights. Return to zero
after dismounting. Screws,
Micro tool and thread sealer
included
Art. No. 12905 *

Micro Spacer Low

For Micro T-1. Raises height
of optical axis to 30 mm. Four
screws (torx), Micro Tool and
thread sealer included
Art. No. 12357

Micro Spacer High

For Micro T-1. Raises height
of optical axis to 39 mm for
cowitness with AR-15. Four
screws (torx), Micro Tool
and thread sealer included
Art. No. 12358

Micro mount for Glock pistols

For Micro T-1. Screws, Micro Tool
and Allen key included
Art. No. 12437

Mount Adapter 30 mm
For mounting Micro sights
on magnifying scopes with
30 mm tube
Art. No. 200152

Mount Adapter 34 mm
For mounting Micro sights
on magnifying scopes with
34 mm tube
Art. No. 200153

LRP Mount
Lever Release Picatinny Mount
for CompM4, PRO and Ring
Base & Top. Return to zero
after dismounting. Screws,
Allen key and thread sealer
included
Art. No. 12198

Accessories

Flip-up Front Cover

For CompM4, PRO and
ACO
Art. No. 12223

Flip-up Rear Cover

For CompM4, PRO and
ACO
Art. No. 12224

Flip-up Front Cover

Transparent
For CompM4, PRO
and ACO
Art. No. 12241

ARD
KillFlash filter for
CompM4, PRO and
ACO
Art. No. 12239

Polarization Filter
Polarization Filter
for reduction of sun
reflection.
Fits rear of CompM4,
PRO and ACO sights
Art. No. 12216

Flip-Up Front Cover with Flip-up ARD

Transparent (open & closed)
For CompM4, PRO & ACO sights
Art. No. 200122

Flip-Up Front Cover

with Flip-up ARD
(open & closed) For
PRO, ACO and CompM4
Art. No. 12462

Flip-up Front Cover

For Micro T-2
Art. No. 200191

Flip-up Rear Cover

Transparent
For Micro T-2
Art. No. 200193

10

Flip-up Rear Cover

Transparent
For CompM4, PRO
and ACO
Art. No. 12240

Flip-up Front Cover

Transparent
For Micro T-2
Art. No. 200192

Lens Cover
For PRO and ACO mounted with Quick Release
Art. No. 12228

Rubber Bikini Lens Cover

For Micro H-1
Art. No. 12204

AA Battery
Alkaline
For CompM4
Art. No. 12242

DL1/3N, Lithium Battery

For PRO & ACO
Art. No. 10903

CR 2032
Lithium Battery
For Micro sights
Art. No. 12211

Rubber Bikini Lens Cover

For CompM4
Art. No. 12205

Micro Tool
Art. No. 12207

Outer Rubber Cover

Color: Dark Earth
Brown. For PRO and
ACO. 1.8 oz (50 g)
Art. No. 12226

Double Battery Kit

For PRO and ACO
Art. No. 12247

Outer Rubber Cover

Color: Black. For PRO and ACO.
1.8 oz (50 g)
Art. No. 12225

TECHNICAL SPECS

CR2032

CR2032

DL1/3N

2L76 or DL1/3N

DL1/3N

50,000 on
setting 8

50,000 on
setting 8

One year

30,000 on
setting 7

One year

Anti-reflex coating all surfaces & multi-layer coating objective lens

ELECTRONIC DATA

One 3V Lithium battery, type

One AA battery, accepts 1.5-5V
Battery life in hours**

Battery life, in hours**, NVD settings

500,000

Manual rotary switch - Dot intensity regulator

Daylight (DL) settings

NVD and daylight (DL) settings

1 Off, 4 NVD & 8

DL of which one
extra bright

MECHANICAL DATA

Material housing, extruded high strength aluminum

Surface finish, hard anodized, matte

Color black

Material lens covers -Thermoplastic Elastomer, black matte

Material lens covers - rubber - black - matte
Adjustment 1 click =

x
x

13 mm at 100 m
1/2 at 100 yds

Mounting methods

Integrated
Picatinny mount

ENVIRONMENTAL DATA

Temperature range -45 - +71 C (50- +160 F)

Water resistance - submersible to

500,000
x

1 Off, 4 NVD & 8

DL of which one
extra bright

300,000
x

Off, 12 DL

No magnification (1X)

Unlimited eye relief

Band Pass coating for NVD*** compatibility

COMPM4
COMPM4S

Law Enforcement

APPLICATION FIREARMS

13 mm at 100 m
1/2 at 100 yds

13 mm at 100 m
1/2 at 100 yds

16 mm at 100 m
1/2 at 100 yds

16 mm at 100 m
1/2 at 100 yds

16 mm at 100 m
1/2 at 80 yds

Integrated
Picatinny mount

Integrated
Picatinny rail
mount

Integrated QRP2
mount

Integrated
Picatinny QRP2
mount

5 m (15 ft)

45 m (150 ft)

5 m (15 ft)

45 m (150 ft)

Length

62 mm (2.4)

68 mm (2.7)

2.4 / 62 mm

130 mm (5.1)

130 mm (5.1)

120 mm (4.7)

Width/height - sight house only

41 x 36 mm
(1.6 x 1.4)

41 x 36 mm
(1.6 x 1.4)

3.0 oz/ 84 g

55 x 55 mm
(2.2 x 2.2)

55 x 55 mm
(2.2 x 2.2)

53 x 60 mm
(2.1 x 2.4)

Width/height - including standard mount

62 x 41mm
(2.4 x 1.6)

Maximum ring width

62 x 41mm
(2.4 x 1.6)

Weight - sight house and battery only

84 g (2.96 oz)

94 g (3.31 oz)

Weight - Sight complete

116 (4.09 oz)

130 g (4.59 oz)

****

Warranty Information

Aimpoint values your business and always attempts to provide you the very best of products
and services. Thats why we back our products with one of the best guarantees in the industry.
Our products are guaranteed to be free from original manufacturer defects in material and/
or workmanship under normal use from the date of purchase for two (2) years for professional users.

75 x 75 mm
(2.95 x 2.95)
220 g (7.8 oz)

190 g (6.7 oz)

268 g (9.45 oz)

105 g

360 g (12.7 oz)

295 g (10.4 oz)

376 g (13.26 oz)

30 mm

secondary use - not recommended

- Working principle: Reflex collimator sight - red dot sight

OPTICAL DATA

- LED (Light Emitting Diode) totally eye-safe

- Light source wave length, 650 nm red light
- Absence of parallax - No centering required
- Unlimited eye relief
- Anti-reflex coating all surfaces & multi-layer coating objective lens
- No magification (1X)

MECHANICAL DATA

- Material housing and tube, high strength aluminium

- Surface finish housing, anodized, semi-matte
- Black color housing

ENVIRONMENTAL DATA

- Temperature range -45 - +71 C (50- +160 F)

- Submersible, for more details see page 11
- No radioactive material used
- No laser emission

Customer Service & Dealership Eligibility

For dealership eligibility and information about customer service, please scan
the code or follow the link.

* MOA (minute of angle) 1 MOA 30 mm at 100 meters 1 at 100 yards

** At room temperature
*** NVD = Night Vision Device
**** See the product pages for further details
Specifications are subject to change without notice.

TECHNOLOGY

72 x 72 mm
(2.8 x 2.8)

www.aimpoint.com/customerservice

11

FEATURES FOR ALL AIMPOINT RED DOT SIGHTS

1.6 x 1.6
41 x 40 mm

30 mm

75 x 56 mm
(2.95 x 2.2)

primary use

25 m (80 ft)

No radioactive components used

HMG (Heavy machine gun

25 m (80 ft)

DIMENSIONS

MMG (medium machine gun)

Integrated
Picatinny mount

LMG (light machine gun)

7 NVD & 9 DL of
which one extra
bright
x

SMG (sub-machine gun)

PDW (personal weapon defence)

500,000

Carbine

80,000 on
setting 12

Pistol - Revolver

Armed Forces - Special Units

Off, 9 DL

1 Off, 4 NVD & 5

DL of which one
extra bright

APPLICATION AREAS

COMPM4
COMPM4S

4 or 2

ACO

ACO

Red dot size - in MOA (minutes of angle)*

Absence of parallax - No centering required

PRO

PRO

MICRO H-1

MICRO H-1

LED (Light Emitting Diode) totally eye-safe

Light source wavelength, 650 mn red light

MICRO T-2

Micro T-2

MICRO T-1

Micro T-1

OPTICAL DATA

General TECHNICAL DATA

www.aimpoint.com/dealership

Aimpoint, Inc.
14103 Mariah Court
Chantilly, VA 20151
Phone 703.263.9795
Fax 703.263.9463
E-mail: [email protected]

www.aimpoint.com

SpeedMeet
Accuracy
In summary, Aimpoints breakthrough technology allows you
to do what comes naturally shoot with both eyes open while
remaining focused on the target. When you look through an
Aimpoint sight, a red dot appears in the lens. When the red dot
is on target, so are you, with no centering required. It is this
inherent combination of simplicity, speed, and accuracy that
makes Aimpoint sights the preferred choice for beginners and
experts alike.
Get on target fast, and forget about being challenged by bad
light or moving targets.
Photographers: Bigdomphoto , Stefan Albers, Peter Ozberg, Henry Kokko.
Art Direction and Layout: Thorn Reklambyr, Printing House: Exaktaprinting, Malm, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB
All rights reserved. 2015 Aimpoint AB. Art. No. M01980