Scribd
Upload
121 views2 pages

Analysis Using EES, The Problem Is Solved As Follows

This document presents the analysis of a gas turbine cycle where the mass flow rate, pressure ratio, turbine inlet temperature, and isentropic efficiencies of the turbine and compressor are variables. The analysis is performed in EES to determine the effect of varying these parameters on cycle performance metrics like net work, thermal efficiency, and back work ratio.

Uploaded by

Venkat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
121 views2 pages

Analysis Using EES, The Problem Is Solved As Follows

This document presents the analysis of a gas turbine cycle where the mass flow rate, pressure ratio, turbine inlet temperature, and isentropic efficiencies of the turbine and compressor are variables. The analysis is performed in EES to determine the effect of varying these parameters on cycle performance metrics like net work, thermal efficiency, and back work ratio.

Uploaded by

Venkat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9-62

9-84
Problem 9-83 is reconsidered. The mass flow rate, pressure ratio, turbine inlet temperature, and the isentropic
efficiencies of the turbine and compressor are to be varied and a general solution for the problem by taking advantage of the
diagram window method for supplying data to EES is to be developed.
Analysis Using EES, the problem is solved as follows:
"Input data - from diagram window"
{P_ratio = 10}
{T[1] = 295 [K]
P[1]= 100 [kPa]
T[3] = 1240 [K]
m_dot = 20 [kg/s]
Eta_c = 83/100
Eta_t = 87/100}
"Inlet conditions"
h[1]=ENTHALPY(Air,T=T[1])
s[1]=ENTROPY(Air,T=T[1],P=P[1])
"Compressor anaysis"
s_s[2]=s[1] "For the ideal case the entropies are constant across the compressor"
P_ratio=P[2]/P[1]"Definition of pressure ratio - to find P[2]"
T_s[2]=TEMPERATURE(Air,s=s_s[2],P=P[2]) "T_s[2] is the isentropic value of T[2] at compressor exit"
h_s[2]=ENTHALPY(Air,T=T_s[2])
Eta_c =(h_s[2]-h[1])/(h[2]-h[1]) "Compressor adiabatic efficiency; Eta_c = W_dot_c_ideal/W_dot_c_actual. "
m_dot*h[1] +W_dot_c=m_dot*h[2] "SSSF First Law for the actual compressor, assuming: adiabatic, ke=pe=0"
"External heat exchanger analysis"
P[3]=P[2]"process 2-3 is SSSF constant pressure"
h[3]=ENTHALPY(Air,T=T[3])
m_dot*h[2] + Q_dot_in= m_dot*h[3]"SSSF First Law for the heat exchanger, assuming W=0, ke=pe=0"
"Turbine analysis"
s[3]=ENTROPY(Air,T=T[3],P=P[3])
s_s[4]=s[3] "For the ideal case the entropies are constant across the turbine"
P_ratio= P[3] /P[4]
T_s[4]=TEMPERATURE(Air,s=s_s[4],P=P[4]) "Ts[4] is the isentropic value of T[4] at turbine exit"
h_s[4]=ENTHALPY(Air,T=T_s[4]) "Eta_t = W_dot_t /Wts_dot turbine adiabatic efficiency, Wts_dot > W_dot_t"
Eta_t=(h[3]-h[4])/(h[3]-h_s[4])
m_dot*h[3] = W_dot_t + m_dot*h[4] "SSSF First Law for the actual compressor, assuming: adiabatic, ke=pe=0"
"Cycle analysis"
W_dot_net=W_dot_t-W_dot_c"Definition of the net cycle work, kW"
Eta=W_dot_net/Q_dot_in"Cycle thermal efficiency"
Bwr=W_dot_c/W_dot_t "Back work ratio"
"The following state points are determined only to produce a T-s plot"
T[2]=temperature(air,h=h[2])
T[4]=temperature(air,h=h[4])
s[2]=entropy(air,T=T[2],P=P[2])
s[4]=entropy(air,T=T[4],P=P[4])

PROPRIETARY MATERIAL. 2015 McGraw-Hill Education. Limited distribution permitted only to teachers and educators for course preparation.
If you are a student using this Manual, you are using it without permission.

9-63

Bwr

Pratio

0.5229
0.6305
0.7038
0.7611
0.8088
0.85
0.8864
0.9192
0.9491
0.9767

0.1
0.1644
0.1814
0.1806
0.1702
0.1533
0.131
0.1041
0.07272
0.03675

2
4
6
8
10
12
14
16
18
20

Wc
[kW]
1818
4033
5543
6723
7705
8553
9304
9980
10596
11165

Wnet
[kW]
1659
2364
2333
2110
1822
1510
1192
877.2
567.9
266.1

0.36

Wt
[kW]
3477
6396
7876
8833
9527
10063
10496
10857
11164
11431

Qin
[kW]
16587
14373
12862
11682
10700
9852
9102
8426
7809
7241

4500

0.32
0.28

3600
0.24
3150
0.2

Wnet [kW]

4050

2700

0.16
0.12
2

10

12

14

16

18

2250
20

Pratio

Air

1500

T [K]

1000

2
4s

2s

500
1000 kPa
100 kPa
0
4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

s [kJ/kg-K]

PROPRIETARY MATERIAL. 2015 McGraw-Hill Education. Limited distribution permitted only to teachers and educators for course preparation.
If you are a student using this Manual, you are using it without permission.

You might also like