Scribd
Upload
852 views4 pages

Network Theory Question Paper

This document contains the questions for a Network Theory exam for a class numbered 1081. It includes 10 questions related to circuit analysis techniques like mesh analysis, nodal analysis, Thevenin's theorem, Fourier analysis, and filter design. Students are asked to determine currents, voltages, parameters, and component values for various RLC circuits shown in figures. They must answer all 10 questions, which are worth 10 marks each, for a total of 100 marks.

Uploaded by

Naveen Yannamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
852 views4 pages

Network Theory Question Paper

This document contains the questions for a Network Theory exam for a class numbered 1081. It includes 10 questions related to circuit analysis techniques like mesh analysis, nodal analysis, Thevenin's theorem, Fourier analysis, and filter design. Students are asked to determine currents, voltages, parameters, and component values for various RLC circuits shown in figures. They must answer all 10 questions, which are worth 10 marks each, for a total of 100 marks.

Uploaded by

Naveen Yannamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Summer Term End Examination - July 2013

Class NBR
Course Code
Course Title

: 1081
: EEE108
: Network Theory

Time : Three Hours

Slot : A

Max.Marks:100
Answer ALL Questions
(10 X 10 = 100 Marks)

1.

In the circuit of Fig. 1 determine the mesh currents i1 and i2. Let V1 = 10cos4tV and
V2 = 20cos(4t-30)V

Fig.1
2.(a)

Find ix in the circuit of Fig. 2 using nodal analysis.

Fig.2
(OR)
2.(b)

a in Fig.3
Obtain Thevenin equivalent circuit at terminals a-b

Fig.3

Page 1 of 4

3.

Find Vo (t) in the circuit of Fig 4. Assume intial voltage Vo(0) = 5V

Fig.4
4.

For the circuit of Fig 5. Find I1/Vs.

Fig.5
5.

Determine the y parameters for the two-port


two
network shown in Fig 6.

Fig.6
6.

Evaluate V2/Vs in the circuit in Fig 7.

Fig.7

Page 2 of 4

7.(a)

Find transmission parameters for the two-port


two
network shown in Fig 8.

Fig.8
(OR)
7.(b)

Obtain the Fourier series for the periodic function in Fig 9 and plot the amplitude and
phase spectra.

Fig.9
8.

Determine the Fourier series for the half-wave


half wave rectified cosine function shown in Fig 10.

Fig.10
9.

Determine what type of filter is shown in Fig 11. Calculate the corner or cutoff
frequency. Take R = 2 K,
, L = 2 H and C = 2 F.

Fig.11

Page 3 of 4

10.

If the bandstop filter in Fig 12 is to reject a 200-Hz sinusoid signal while passing other
frequencies, calculate the values of L and C. Take R = 150 and the bandwidth as 100
Hz.

Fig.12

Page 4 of 4

You might also like