0% found this document useful (0 votes)
562 views6 pages

Lab 5: Inter-Vlan Routing: Topology

The document describes configuring inter-VLAN routing on routers and a multilayer switch to allow communication between PCs on different VLANs. It provides configuration steps for IP addresses, routing protocols, subinterfaces, and DNS to enable communication and name resolution between all devices.

Uploaded by

tecnocabp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
562 views6 pages

Lab 5: Inter-Vlan Routing: Topology

The document describes configuring inter-VLAN routing on routers and a multilayer switch to allow communication between PCs on different VLANs. It provides configuration steps for IP addresses, routing protocols, subinterfaces, and DNS to enable communication and name resolution between all devices.

Uploaded by

tecnocabp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Lab 5: Inter-VLan Routing

Task

Figure 1 Topology

1.
2.
3.
4.
5.
6.
7.
8.

Configure IP Address as per given in topology.


Enable Web_Server as per given details in topology.
Configure R1 for Inter-VLan Routing for R2 and R3.
Enable Routing (as you want) on all Routers.
Make sure PC1 and PC2 communicate with each other.
Configure Multilayer Switch for Inter-VLan Routing.
Make Sure PC3 and PC4 communicate with each other.
PC's are able to ping via domain name.

Lab 5: Inter-VLan Routing


Solution

Task 1: Configure IP Address as per given in topology.

R1
interface FastEthernet0/0
no shut
exit
interface FastEthernet0/1
ip address 25.114.65.1 255.255.255.0
no shut
exit
interface FastEthernet1/0
ip address 64.56.25.1 255.255.255.0
no shut
exit
R2
interface FastEthernet0/0
ip address 102.1.1.100 255.255.255.0
no shut
exit
interface FastEthernet0/1
ip address 10.0.0.254 255.255.255.0
no shut
exit
R3
interface FastEthernet0/0
ip address 183.116.90.200 255.255.255.0
no shut
exit
interface FastEthernet0/1
ip address 20.0.0.254 255.255.255.0
no shut

Lab 5: Inter-VLan Routing


exit
R7
interface FastEthernet0/0
ip address 10.54.224.100 255.255.255.0
no shut
exit

interface FastEthernet0/1
ip address 40.0.0.254 255.255.255.0
no shut
exit
R8
interface FastEthernet0/0
ip address 192.177.245.100 255.255.255.0
no shut
exit
interface FastEthernet0/1
ip address 30.0.0.254 255.255.255.0
no shut
exit
MLS
ip routing
interface FastEthernet0/0
ip address 25.114.65.100 255.255.255.0
no shut
exit
interface FastEthernet0/1
ip address 192.177.245.1 255.255.255.0
no shut
exit
interface FastEthernet2/0
ip address 10.54.224.1 255.255.255.0

Lab 5: Inter-VLan Routing


no shut
exit
Web_Server (Router used as a Server)
interface FastEthernet0/0
ip address 64.56.25.200 255.255.255.0
no shut
exit

Task 2: Enable Web_Server as per given details in topology.

Web_Server (Router used as a Server)


ip route 0.0.0.0 0.0.0.0 64.56.25.1
ip dns server
ip host netwaxlab.com 100.100.100.100
ip host blog.eincop.com 100.100.101.100

Task 3: Configure R1 for Inter-VLan Routing for R2 and R3.

R1
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 102.1.1.1 255.255.255.0
no shut
exit
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 183.116.90.1 255.255.255.0
no shut
exit

Task 4: Enable Routing (as you want) on all Routers.

R1
router eigrp 100
redistribute static
network 25.114.65.0 0.0.0.255
network 64.56.25.0 0.0.0.255

Lab 5: Inter-VLan Routing


network 102.1.1.0 0.0.0.255
network 183.116.90.0 0.0.0.255
no auto-summary
R2
router eigrp 100
network 10.0.0.0 0.0.0.255
network 102.1.1.0 0.0.0.255
no auto-summary
R3
router eigrp 100
network 20.0.0.0 0.0.0.255
network 183.116.90.0 0.0.0.255
no auto-summary
R7
router eigrp 100
network 10.54.224.0 0.0.0.255
network 40.0.0.0 0.0.0.255
no auto-summary
R8
router eigrp 100
network 30.0.0.0 0.0.0.255
network 192.177.245.0
no auto-summary
MLS
router eigrp 100
network 10.54.224.0 0.0.0.255
network 25.114.65.0 0.0.0.255
network 192.177.245.0
no auto-summary

Lab 5: Inter-VLan Routing

Task 5: Make sure PC1 and PC2 communicate with each other.
Task 6: Configure Multilayer Switch for Inter-VLan Routing.

We already configure in Task 1. ( we need to use only "ip routing" command to enable routing on L3 or
MLS Switch).

Task 7: Make Sure PC3 and PC4 communicate with each other.
Task 8: PC's are able to ping via domain name.

Use this commands on all devices except PC and Server.


ip domain lookup
ip name-server 64.56.25.200

You might also like