Scribd
Upload
134 views1 page

QRP Amp Driver

1. 250 mW of power was selected at 1 watt and the power output of the SAVXO straight through the TxTopper 40 m amp was measured with the amp power off at 10 Vpp or 250 mW. 2. 10 watts of power was selected and the power output of the SAVXO driving the TxTopper 40 m amp was measured with the amp power on at 35 Vpp or 3.06 watts. 3. The document provides measurements of the power output from the SAVXO into the TxTopper amp and then from the amp into the load at different power levels and with the amp powered on and off.

Uploaded by

DefaultAnomoly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
134 views1 page

QRP Amp Driver

1. 250 mW of power was selected at 1 watt and the power output of the SAVXO straight through the TxTopper 40 m amp was measured with the amp power off at 10 Vpp or 250 mW. 2. 10 watts of power was selected and the power output of the SAVXO driving the TxTopper 40 m amp was measured with the amp power on at 35 Vpp or 3.06 watts. 3. The document provides measurements of the power output from the SAVXO into the TxTopper amp and then from the amp into the load at different power levels and with the amp powered on and off.

Uploaded by

DefaultAnomoly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 watt power selected

250 mW

10 watt power selected


Hi-Tech
Motion
Eliminator

Amp

Power output of SAVXO straight through


the TxTopper 40 m amp, amp power off.

Power output of SAVXO driving the


TxTopper 40 m amp, amp power on.

Topper Amp web page -- http://w5usj.com/TxTopperQRPAmp.html


Power output from VXO into Amp

Power output from Amp into load

10 Vpp

35 Vpp

V = 2 V/div

V = 5 V/div

Po = (Vpp x 0.3535) 2 / 50 = 250 mW


Supply Voltage = 12.5

Po = (Vpp x 0.3535)

/ 50 = 3.06 W

Supply Voltage = 12.0


(Po at 13.8 V ~ 4 W)

4SQRP SAVXO and TxTopper Amp


W5USJ drawing 1 Mar 2012

You might also like