Scribd
Upload
69 views1 page

Magnetic Proximity Switch.

Magnetic Proximity Switch.

Uploaded by

elvergonzalez1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Magnetic Proximity Switch.

Magnetic Proximity Switch.

Uploaded by

elvergonzalez1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Magnetic proximity switch.

Here is the circuit diagram of a magnetic proximity switch that finds a lot of applications in many fields.The circuit
is based on a magnetic reed switch(S1) as the proximity sensor. A monostable multivibrator based on NE555 (IC1)
and a toggle flip flop based on CD4013 (IC2) does the rest of the circuit.
When a magnet is reached in proximity of S1 it closes to give a negative trigger at pin 2 of IC1.The output of IC1
goes high for a time determines by R2 and C2.This clocks the IC2 wired as a toggle flip flop.The output (pin 1 ) of
IC2 goes high and the transistor Q1 is biased to ON.The relay is activated and so do the equipment connected to
the relay.The LED D1 glows when IC1 is triggered.
Circuit diagram with Parts list.

Notes.
Switch S1 can be a general purpose magnetic reed switch.
The equipment to control can be connected using NC,NO and C points of the relay according to the
application.
Use a 12 regulated power supply for powering the circuit.

You might also like